I got crazy vibes with the venom props on a new alienwhoop with unicorns, so I'm sticking with the gemfan triblades. Everyone else seems to be having great luck with them though.
Hi there 😊 Albert do know this “new kind” of ultra light quads named Tooth pick? KebabFPV made several videos on it. They are sub 50g with 65mm props, they fly awesome and don’t make any noise. I think it start to became a big thing ! They are plenty of motors coming out especially for this category.
Yes, I'm well aware of the Gemfan 65mm prop on brushless motors. I have builds on my channel from April 2018. I have many builds with different motors and that prop.
Love my beebrain I actually purchased it based on your vid you did about them.. Waiting on unicorn motors as well.. glad you mentioned the prop Getting hot.. Got venom props so I'm sure I will get in lots of trouble with those😁💨
I’m curious about the venom props on the unicorn motors. When you get your hands on some Venoms, you should definitely try to do a review? I have an Eachine E010 that I’ve upgraded to insane motors and cut two blades off the stock props to make them bi-blades. It’s got a lot more punch that way.
The unicorns always seemed a little gimmicky to me because they just destroy batteries and you have to let them cool off between flights or they will burn out quickly. Clearly have to be really careful with them and if you want power you should be flying brushless, brushed has been great for proximity control not so much for top speed and acro. My $.02
they're fun for certain races that don't allow brushless (yet!). Most people I know still run awesomesauce, probably because it's a lot more reliable and practical. fwiw, I still get close to 3 min on triblades using good 260mah and 225mah sticks, so it's doable.
What?!?!?! You get 4-4.5 minutes on the gold motors????! 😲 I just switched to the HQ prop and it added 45secs (and way smoother) but I’m still under 3min
I'm using the Eachine prop and a 300mah 1S GNB HV to get those flight times. Normal flying around 30-40% throttle most of the time. If I fly acro with a lot of throttle above 60%, I get 3 minutes.
What voltage is recommended on the 250 to 300mah batteries on the Osd? 3.2v or so? I think i get 3-4 min on 3 blades with my beebrain lite, dsm2 setup.
@@miketech2 oh i bet, mostly just joking around. Most of the guys in my group got on the brushless craze, some still have a brushed as a backup but either 75x, m7 or tinyhawk, we setup race tracks that take advantage of the power and speed
If you setup a tight small track with a lot of turns, the brushed whoops will usually beat the brushless because the track type negates their power advantage.
If you break that little tab off underneath of the motor it will sit flush with the frame
Much Better Performance👽👊
ah, interesting!
Props will last longer too!
I was just coming to say the same thing LOL
Hi Albert, great video. Btw Can I use the gold motors on my Bwhoop B03 Pro...? Is it possible? 😄
I cut of the plastic tab on the frame to fit the unicorn motors flush to the frame
Newbee drone recommends you cut the nubs off the bottom of the motor mounts. That will allow the unicorn motor to be flush at the top.
did they show how to do that? getting cutters in there seems impossible.
@@AlbertKimTV The Quadcopter Review shows how and Tronage also does. Sorry I couldn't find the Video from Boot goose who works at Newbee Drome.
@@AlbertKimTV They used a hobby knife.
Pretty interesting motors, Albert! Great flying!!! 😊
Unicorn motors are awesome especially with the venom props
yeah, need to get some... out of stock everywhere!
I got crazy vibes with the venom props on a new alienwhoop with unicorns, so I'm sticking with the gemfan triblades. Everyone else seems to be having great luck with them though.
Yea exactly what I was looking for after more than 1 battery these things are smoking hot glad it's not just me got some bi blades on the way
😎
looks like you're running props in on the 4 blade and props out on the 2 is there a reason? Witch do you prefer in or out?
no reason. I fly both ways and I'm always experimenting. Overall I prefer props out.
Hi there 😊 Albert do know this “new kind” of ultra light quads named Tooth pick? KebabFPV made several videos on it. They are sub 50g with 65mm props, they fly awesome and don’t make any noise. I think it start to became a big thing ! They are plenty of motors coming out especially for this category.
Yes, I'm well aware of the Gemfan 65mm prop on brushless motors. I have builds on my channel from April 2018. I have many builds with different motors and that prop.
Albert Kim Oh yes i forgot your video on the FlexRC SlimX 🤩 Thanks for this answer.
I really like these motors. They got some good power.
Love my beebrain I actually purchased it based on your vid you did about them.. Waiting on unicorn motors as well.. glad you mentioned the prop Getting hot.. Got venom props so I'm sure I will get in lots of trouble with those😁💨
I fly mockingbird indoors and acro outdoors.
For me a more "general purpose" motor is the way to go. I'd have to dedicate a whoop just for the Unicorn motors, which doesn't seem practical.
To each his own. Some other guy will say its the Unicorn motor or bust.
I’m curious about the venom props on the unicorn motors. When you get your hands on some Venoms, you should definitely try to do a review? I have an Eachine E010 that I’ve upgraded to insane motors and cut two blades off the stock props to make them bi-blades. It’s got a lot more punch that way.
The unicorns always seemed a little gimmicky to me because they just destroy batteries and you have to let them cool off between flights or they will burn out quickly. Clearly have to be really careful with them and if you want power you should be flying brushless, brushed has been great for proximity control not so much for top speed and acro. My $.02
they're fun for certain races that don't allow brushless (yet!). Most people I know still run awesomesauce, probably because it's a lot more reliable and practical. fwiw, I still get close to 3 min on triblades using good 260mah and 225mah sticks, so it's doable.
What?!?!?!
You get 4-4.5 minutes on the gold motors????! 😲
I just switched to the HQ prop and it added 45secs (and way smoother) but I’m still under 3min
I'm using the Eachine prop and a 300mah 1S GNB HV to get those flight times. Normal flying around 30-40% throttle most of the time. If I fly acro with a lot of throttle above 60%, I get 3 minutes.
What voltage is recommended on the 250 to 300mah batteries on the Osd? 3.2v or so? I think i get 3-4 min on 3 blades with my beebrain lite, dsm2 setup.
Batteries
Unicorn 🦄 magical 😁🤘
People still use brushed? So 2017 ;)
reflector36. Yeah man. The bbl is that good. I want to try the alien and TW brushless too though.
@@miketech2 oh i bet, mostly just joking around. Most of the guys in my group got on the brushless craze, some still have a brushed as a backup but either 75x, m7 or tinyhawk, we setup race tracks that take advantage of the power and speed
If you setup a tight small track with a lot of turns, the brushed whoops will usually beat the brushless because the track type negates their power advantage.
It’s all for fun and we all have brushless rigs too... we are flying these just to have something in every category LOL
🦄