I like how the blue box or mask is going bonkers on the one guitarist because he's turned too sideways. I assume there isn't much that can be done about that.
Thanks for the great explanation. I’m having an issue with a random dark line along the jawline on my face swaps, I’m guessing maybe it’s from the face underneath? Wondering how I can fix this I’ve tried the padding with no luck, it just keeps showing up
I couldn't really say. It's next to impossible to really tell what the issue is without seeing the target and source you're using along with whatever settings you have setup too. The best thing to do would be to open up a help thread on the FaceFusion Discord (link in the description) and post whatever information you can. I'm there a lot and the developer team and others there are very helpful.
@@shadyendeavor thanks I’ll do that, I just decided to scrap it and try another one I figured you would need more context unless it’s a common problem, figured I’d ask, thanks again… Btw you been using Luma Ai? Been slammed today since launch
@@jreamstate I haven't had a chance to check it out yet. I've been too busy working on my next video that releases in just over 3 hours. But I'll take a look soon.
@@shadyendeavor so far I’ll say this. Non human is pretty sick. Humans need work as per usual, but if you just do prompts where they don’t move much it looks pretty amazing.
Sometimes it just happens to work, but usually not. It's basically because the model is doing what it's supposed to do, which is to swap the face with another face, not whatever else the source may have on their face. Just like how it does (most of the time) work the opposite way, where if your target is wearing glasses, they will continue to wear glasses with the swap. Regardless of if the source has them.
I assume you have it set to "one" and not "reference". Or you didn't choose the reference face from the available options. Otherwise, it should not do that. The other Basics videos on Face Selectors should explain all of this.
hello friend, i need your help. when i use "face enhancer" it clean naevus and skin spot on tge origin face i need on the swapped face....What can i do so the result face hold the naveus and spots and not clean? Thank you sorry for my english bad, me italian
I"m pretty sure I understood. You're asking how to not get rid of any blemishes or moles or anything like that when using the face enhancer? Unfortunately, there isn't much you can do. You can try turning down the blend amount (I usually set it to 50 or lower anyway). But no guarantees on that helping. However, I have a video coming out in about 15 hours that is all about the new Pixel Booster that may make it so you don't have to use the enhancer at all, depending on your original video. Again, no guarantees, but something to try out. Hopefully that makes sense with the translation. :)
I noticed in the notes on the new one says something about not converting videos over 512mb. I have a lot of high def I like to play with that are about 1G+. So does that mean they wont work?
No, this is a huge improvement. Before this, if you used a large file, Gradio (the UI packag) would automatically force a conversion of your video before you could use it. This is a workaround of Gradio's auto-conversion so that you can instead immediately use your larger video file in the format (as long as it's supported) it is already in.
Typically use 🐾to debug my face, but not at all happy with the face analyzer assuming my gender😾 PS> Already 👍'd / subd... just hoping my comment doesn't get swapped with recycle bin!
Cool video, thanks for sharing, technology is awesome.
I like how the blue box or mask is going bonkers on the one guitarist because he's turned too sideways. I assume there isn't much that can be done about that.
Correct, nothing to fix it with angles like that.
Thanks for that. Find your videos quite useful
Thanks for the great explanation. I’m having an issue with a random dark line along the jawline on my face swaps, I’m guessing maybe it’s from the face underneath?
Wondering how I can fix this
I’ve tried the padding with no luck, it just keeps showing up
I couldn't really say. It's next to impossible to really tell what the issue is without seeing the target and source you're using along with whatever settings you have setup too. The best thing to do would be to open up a help thread on the FaceFusion Discord (link in the description) and post whatever information you can. I'm there a lot and the developer team and others there are very helpful.
@@shadyendeavor thanks I’ll do that, I just decided to scrap it and try another one
I figured you would need more context unless it’s a common problem, figured I’d ask, thanks again…
Btw you been using Luma Ai? Been slammed today since launch
@@jreamstate I haven't had a chance to check it out yet. I've been too busy working on my next video that releases in just over 3 hours. But I'll take a look soon.
@@shadyendeavor so far I’ll say this. Non human is pretty sick. Humans need work as per usual, but if you just do prompts where they don’t move much it looks pretty amazing.
Is there a way to face swap when the source image has eye glasses?
Sometimes it just happens to work, but usually not. It's basically because the model is doing what it's supposed to do, which is to swap the face with another face, not whatever else the source may have on their face. Just like how it does (most of the time) work the opposite way, where if your target is wearing glasses, they will continue to wear glasses with the swap. Regardless of if the source has them.
Is there a way to pause face swapping when the target is off screen? it starts swapping anyone
I assume you have it set to "one" and not "reference". Or you didn't choose the reference face from the available options. Otherwise, it should not do that.
The other Basics videos on Face Selectors should explain all of this.
hello friend, i need your help. when i use "face enhancer" it clean naevus and skin spot on tge origin face i need on the swapped face....What can i do so the result face hold the naveus and spots and not clean? Thank you sorry for my english bad, me italian
I"m pretty sure I understood. You're asking how to not get rid of any blemishes or moles or anything like that when using the face enhancer? Unfortunately, there isn't much you can do. You can try turning down the blend amount (I usually set it to 50 or lower anyway). But no guarantees on that helping.
However, I have a video coming out in about 15 hours that is all about the new Pixel Booster that may make it so you don't have to use the enhancer at all, depending on your original video. Again, no guarantees, but something to try out.
Hopefully that makes sense with the translation. :)
I noticed in the notes on the new one says something about not converting videos over 512mb. I have a lot of high def I like to play with that are about 1G+. So does that mean they wont work?
No, this is a huge improvement. Before this, if you used a large file, Gradio (the UI packag) would automatically force a conversion of your video before you could use it. This is a workaround of Gradio's auto-conversion so that you can instead immediately use your larger video file in the format (as long as it's supported) it is already in.
Typically use 🐾to debug my face, but not at all happy with the face analyzer assuming my gender😾
PS> Already 👍'd / subd... just hoping my comment doesn't get swapped with recycle bin!
I'm just happy to see you were able to break through and get a comment to stick! 😊
@@shadyendeavor ... [Homer Simpson... WHOO HOOO 😸]