Thank you very Much! My Code was SPN 3360 Fmi 9 Turns out that particular 30 AMP FUSE you pointed out was blown. If that wire around transmission top gets grouded by mistake, it blows that fuse. Thanks again
Hola Carlos yo tengo problemas similares y me gustaría saber dónde trabajas para ver si ago una sita con tigo yo tengo un cascadia 2019 y la verdad tengo problema eléctrico y nadie puede llegarle al problema
@@carlosortega6048 man, I looked at your video and you said 18 pin is in the back by that bracket. I went and looked at that bracket, the wires were hitting the drive shaft and were cut. All I have now is a database error 09, does that code have to be deleted with the computer?
@@notkirill6991 they charged labor to put a used one on to see if that was the problem then charged labor to tale off and put a new one on, I no longer have worry about the worthless def system now and had I taken care of the problem sooner I would have saved about 3000.00 and the truck emits less pollution now than it did with that emissions shit working
Thank you very Much! My Code was SPN 3360 Fmi 9
Turns out that particular 30 AMP FUSE you pointed out was blown.
If that wire around transmission top gets grouded by mistake, it blows that fuse.
Thanks again
Thank you!!!. You saved me a whole lot of money.
thank you i had a truck that would not cutt off the 5 amp was blown and i was getting the same code..
Thank you it is very helpful!!
Hello what was those problem came up with those codes and what u did to fix it ?
Thanks it's very helpful 🙂
Carlos, where are you located?
Hola Carlos yo tengo problemas similares y me gustaría saber dónde trabajas para ver si ago una sita con tigo yo tengo un cascadia 2019 y la verdad tengo problema eléctrico y nadie puede llegarle al problema
So what did you do? You tested for power and ground at the 18 pin and 21 pin connector? Or just the 18 pin?
What problems are u having
@@carlosortega6048 man, I looked at your video and you said 18 pin is in the back by that bracket. I went and looked at that bracket, the wires were hitting the drive shaft and were cut. All I have now is a database error 09, does that code have to be deleted with the computer?
Thanks bro
Helpful
Just had my ACM replaced on a 2015 cascadia little over 1400 at the freightliner dealership in okc
That's crazy, the part only cost 500, holds on with 4 or 5 bolts
@@notkirill6991 they charged labor to put a used one on to see if that was the problem then charged labor to tale off and put a new one on, I no longer have worry about the worthless def system now and had I taken care of the problem sooner I would have saved about 3000.00 and the truck emits less pollution now than it did with that emissions shit working
Did this cause no communication with transmission?
No
What software are you using and where can i get it? Do you have a facebook?
freightliner $1800 a year
Yooo I need help
Where are you located. I’m having this problem.
Hello brother
I am facing same issue with 2017 today, can help how did you fix it.
@@SandeepSingh-kr2ep I am facing similar issues now. Can you help. I have 2017 cascadia
@@cheserekusa hey i’m getting same issues did you find out problem ?
@@dhillon11 not yet. If you get it. Let me know
.