Abaqus/CAE 6.11: How to do step by step conduction and convection mode of heat transfer using Abaqus

[@oliveiramachado8049]

Nice work! It's nice to know that there is some people who wants to help! Have a nice day!

[@abaqusacumen7397]

Thanks a lot. These word means a lot for us.

[@gelugon2105]

Thanks for the tutorial. Abaqus is really a pain in the ass to use for a new beginner.

[@expertfea_com]

Superb work!

[@abaqusacumen7397]

+expertfea. com Thanks a lot for your support.

[@TheAkonabhi]

Thank you for your time. Wonderful explanation for teaching Abaqus

[@AJ13196]

Great tutorial. I found it quite useful. Thanks a lot

[@cityzoo777]

Thank you very much!

[@chahinezmedjane7218]

thank u sir! that s help me a lot :)

[@yogeshgowdamc3386]

Thanks a lot
You explain wonderfully through step by step .please explain the transient heat conduction for cooling, of material is quenched and also determine temperature variations, stress at increment of one second.

[@amaral-obaidi4549]

thank you it was a very useful work especially with equation that makes me understand the basics, Danke sschöne

[@NguyenHuuTienbk]

Thank you so much. Great work

[@vahidebrahimzade7676]

Nice, thanks for your efforts.

[@faridkasrakeya]

you are great!

[@rajatjayakkanavar6233]

thank u sir its very usefull

[@k_abhisharma]

simple and excellent.... but I want to ask how did you ensure that other faces are thermally insulated though you have not assigned any boundary condition on these surfaces.

[@abaqusacumen7397]

+abhishek kumar If you don't define any boundary condition on faces. Abaqus take it as fully insulated surface i.e no heat loss through face.

[@k_abhisharma]

Thanks alot..you are doing excellent job...

[@rajukumar-yn3px]

Thank you easy to understand, Can u explain about heat transfer from one object to another object. (Eg. Plate with heaters )

[@nipundezoysa3030]

Thank you sir. This was really helpful. I am trying to model spalling behaviour of concrete in fire using Abaqus.
When I am modeling, I use Abaqus/Standard and Heat transfer step to create thermal load. I need to delete elements from the concrete wall, when element temperature reaches a specific limit(673K). How do I remove these elements in my model?

[@MJs-85]

how to check the temperature of the plate at the end of the last step ? to make sure it is still at 200 K or at least around it ?

[@dhilibans6361]

Nice

[@abaqusacumen7397]

Thanks

[@sasikalyanp7308]

Awesome

[@manovas1731]

Nice, how to find thermal conductivity for composite material?
Conditions: heat conduction ( steady state Temp)

[@mohammadadam4227]

Can we apply temperature as load instate of heat flux?

[@user-sj1ve2ve2v]

Thanks for the video and information! I have a question, though. I'm having a hard time trying to find out how to do this same simulation with a three-layered box. (ex. large box, with a medium box inside of it, with a small box inside of that..) Could you please explain how I could model this? Thanks so much in advance!

[@kitty861987]

Thank you very much for your nice video. I have a question, how to numerical cooling processes such as low-temperature.

[@alali2574]

thank you for this example but if I have another Aluminum plate in the bottom and the heater under the Aluminum plate and the flow is water ( no air ) come on a copper plate ? could you make example ?please

[@varun71290]

Thanks a lot, wonderfully explained step by step. do you have any thermo-mechanical analysis examples ?

[@abaqusacumen7397]

ruclips.net/video/pnbGqnDN2W4/видео.html
Abaqus CAE- Thermo-mechanical with Contact- Example (Simulation of Thermal Switch)

[@varun71290]

thanks, and do u have any video on sequentially coupling thermal-stress analysis ?

[@JKS323]

the tutorial was really helpful but i have a doubt. I want to create a composite layer with different thermal conductivity can you please tell me how can i do that ?

[@minhly650]

Hello
I have a question
Regarding the temperature's unit, is it still the Kevin degree when I do simulation in SI (mm)?
Thank you

[@vaidehicrs9898]

Sir I am getting the following error . How to correct this ?
***ERROR: STRESS-DISPLACEMENT ELEMENTS OR OTHER ELEMENTS WITHOUT TEMPERATURE
DEGREE OF FREEDOM ARE NOT ALLOWED IN A HEAT TRANSFER ANALYSIS

[@vigneshalagarsamy312]

very nice sir...but i want how to do welding in abaqus . without using abaqus module

[@lavanyaeragam7725]

Sir may I know What are the inputs needed for transient heat transfer through a wall?

[@MessaoudiKhaled]

thanks in advance for this tuto!!
Please, I require un exemple with cfd, thermal conduction in pipe which we can have Two or three fluide! thanks

[@Jehosafath]

would you please explain how tho define material properties temperature dependent??

[@DhirajKumar-sw6nk]

can you please tell me how to do laser cutting simulation of copper plate in Abaqus?

[@yogeshgowdamc3386]

Hi sir
Can you help for simulation of the residual stress of a materials like copper, aluminium etc is quenching in quenchants using abaqus CAE software

[@aaame1000]

Thank you very much for these video.... but how can I make film coefficient like a function of temperature??? as you said in video

[@anasullahkhan4042]

Use temperature dependent data

[@narasimhareddypanga8737]

can we analysis of concrete slabs by using Abaqus

[@bharathvasisth4220]

Hi sir
Can you please help me out to simulate the resistance spot welding process using abaqus.

[@rajithpatelrg5855]

Sir iam hvg doubt regarding this if have to contact you is there any way

[@gelugon2105]

So Abaqus assumes any surface that does not have anything to be perfectly insulated. That's a relief. It would have been awful to set something to every surface.

[@acanesovic3384]

Can someone make a clip with a heat exhange?

[@NguyenMinh-pt4de]

hello, i see this video really useful for me but i have trouble with english so i can't understand what he said, please, can you write down what he said to 3:10s for me, help me, i don't know what i need to do to get your help, so sorry if i annoy you.

[@Tewfik1]

I need your email please