I printed one of these and found that my wasr, saiga, and zastava all needed assistance with fitting with shims or required trigger work, most luck I had was with ALG triggers but the guns were prone to running away due to the cam beginning to wear down and being stuck into place or had failures to feed or not getting hung up and not going into battery (especially with the zastava) all in all if you have experience under your belt its a cool little range toy but is very difficult for most people to enjoy due to the 2+ hours of troubleshooting it requires or more depending on knowledge and compatibility. You hit the nail right on the head with your video and hopefully they'll make advancements to the design in the future.
"All Aks are different". Yeah, no joke ! I have been trying to tell the collective AK community this for decades with varying degrees of success. This applies to just about every part including magazines ...
Can you elaborate on the mag part? Like for example, amound 7.62x39 AK variants which ones are not compatible? I thought they were ALL interchangable...
@@Letmechill4asec between the mag catch and the mag well there are variances. With a 762/545 rifle the worst you’ll find if it’s still usable is just a tight magwell or not enough taken off the mag catch. With a 556 gun you’re really only gonna run into compatibility issues with steel magazines. Some of them are a bit tight but as far as compatibility, there is not a ton of issues. Usually just not enough tuning with the mag well and mag catch. Century is notorious for not cutting their mag catches correctly and having some pretty tight wells. Rifles come in single stack and have to be opened up. This is not true of the pistols like an M92 or mini Beryl.
@@Letmechill4asec Magazine fitment and function is a magazine by magazine and a rifle by rifle issue. If me and you have rifles from the same factory that are 1 serial number different then what works on my rifle may not work on yours. It’s almost as if it depends on the quantity and quality of the local booze that the builder imbibed that day. One of my rifles detests Bulgarian commercial magazines that the collective hive mind claims are the bees knees. They turned my rifle into an expensive straight pull. I have Polish magazines (Again according to the hive mind, supposedly high quality magazines) that will fit and lock into my mag well, but won’t feed. I have rifles that love Croatian, Tapco, and Promag (supposedly some of the worst, according to the hive mind). My 7.62 rifles run well the Korean KCI 20 round magazines but not the 30. For an upcoming 2gun match I am running a combination of Bosnian A.C. Unity, Zastava Polymer, Magpul, Promag. Listening to the hive mind, I’m not getting past the first stage with those magazines. What you have to do is buy one or two magazines of a particular type and test ‘em hard. If they fit and feed reliably in your rifle then buy more of that type. If not well you now have a small number of drill and dry fire magazines that you didn’t dump a lot of cash into.
@@winkleriedI've seen the hate on Croatian mags, but my AK loves them and the shelved follower that catches the bolt on empty feels at home on the M70
Oh my God is that the greatest analogy. I wish I would’ve thought of that myself. If you want drop in for an AK, you’re gonna have to spend a lot more time on R&D. With cars, thats why brands like HKS cost a fuckin ton and you STILL may have to do some fitting.
I have the Super Safety for my AR15 and much like the AK, it’s not a simple ‘drop-in’. Material removal on the trigger and a different safety detent is essential for proper function. That being said, now that it’s in, it’s been flawless. I know AR to AK is apples to oranges, but you’re smart in alerting people to the need to understand this is anything but drop in.
@ - You’re going to love it. I have the Hoffman Tactical SuperSafety in an 11.3” pistol build my buddies made me for surviving spinal cancer. I wish I could post a pic - it’s so badass. The function has been absolutely flawless. I’m going to buy a complete Bore Buddy .22LR conversion with the SS trip kit. This thing in 22LR is going to be a hootenanny, but as it sits in 5.56, it just makes you laugh endlessly and forget the .48¢ a round - lol. Happy New Year!
@ congratulations on your survival! That’s fantastic to hear. Have you had any luck with those conversion kits? I had a 22 LRAR but it was factory. One of the Walther-Hammerli’s. Unfortunately, I had to sell it to pay for a lawyer.
@ Thanks! Every day above the dirt is a good day! I have an original Ceiner .22 LR kit and while it’s getting long in the tooth, it’s still semi reliable. I have a friend with a CMMG kit and his has been great, though I heard some folks have trouble with them. Bore Buddy is a great site. They have upgrade spring kits for the CMMG and Ciener kits. For $249 + the SS trip, it’s worth it for me to just start over. The spinal cancer left my fingertips numb, so doing intricate work isn’t worth the hassle. My rifle building days are likely over, but no complaints man - I’m still alive.
Nevermind I spoke too soon. You answered it. I have the mars frt and it didn't come with the jig. My mars kit works awsome but I am really interested in the SS version. Why is the cam on the SS weird shaped on the side?
Great vid! Here's a question that NONE of the SS makers have answered/replied. Can these designs work in a Chinese receiver? Does the 1.5mm vs.1.0mm thickness matter? Keep up the first class work!
Tried on a GF3 UF no luck, bent rod and out of battery dry firing. Could not use in a wasr 10 either as the trigger was shorter then one provided. May just need to wait for a drop in the future.
WTF? Who did you buy from? I can definitely guarantee you Alfa and Deez Nuts are not a scam at all. Harrison either. Did you happen to pre-order from trigger Empire? Thats the scam company selling them for that much.
That would have been Konos Trigger empire. The scammers that were getting triggers from Marz and pretending they made them. Scam about 100 peeps from what I heared.
@@180filoSX Theyre still doing it. Trigger Empire is still at gunshows and “Texas Triggers” is releasing videos with the Mars Trigger and calling it the “Diablo”. The “Diablo” is apparently like $350. I dunno, they gave a bunch of wacky prices publicly.
The dimensions in a cad file are the dimensions whether you print it or cnc it. Whether it comes out to those dimensions as another story, but that’s going to be a variable from equipment to equipment, not the file itself.
@@D45726Lkthsc Man, I was just trying to use simple language. Im not gonna go through a CNC seminar. Thats why I said ‘to work with their CNC’. Im a manual machinist anyhow. I wouldnt use the best language even if I did go through how its adapted.
@@shaundraco308 oh there is a follow up coming soon. An ALG definitely does not go brrrrr. It’s no more aggravating than anything you have to do doing basic gunsmithing. There is a reason I was upfront that I am working with Alfa. It is a completely different design, requires much less tuning, and there is currently a version 2.0 in development. I’m just not going to make any claims on what we are doing with 2.0 until we are far further and have a prototype, but I will say the thing we are trying to get to is aggravation free.
No. Milled or stamped doesnt matter really at all. Itll still need tuning. Those variations will exist brand of receiver to brand. Itll likely be more consistent, but AK receivers in general are a nightmare.
@ oh yeah, the center support isn’t an issue. Just off the top of my head. The only one I can see maybe even causing an issue at all would be a 100 series rear, but I just did one this weekend and it didn’t interfere. I could see it happening now if the trunnion is not installed correctly.
It would help if you had all the parts, Pete sells an incomplete kit based on what he could steal at the time.. What Kalashkamaz is not telling you is that the Alfa trigger is a bootleg with dimensional issues.
The Mars Trigger is an FRT. I think it’s a more reliable design, but I don’t have enough rounds on one to comment on practical reliability. I’m doing some testing as I plan to run one at KB.
In light of your newly acquired gunsmithing experience, what's your opinion on that Riley? Has it changed since the review you made on the one with wood furniture?
@@Jason-co9ep that’s the same gun! Literally, the only thing I have found is that it doesn’t seem to like certain steel mags. They lock in just a tad bit too high. Could fix it, but I generally use polymer mags anyway to save some weight.
@@KalashKamaz Specifically the 7.62 krink, the trunnion lugs should be about 90 degrees. so the slope on the bolt can lock in to maintain headspace. so their bolts are to spec but their trunnions are off since the lug on the right side is backswept slight instead of being 90 degrees. In other works it only make contact with one side of the bolt instead of being contacted at a perfect 90 degree angle. The problem is it causes headspace growth, it's the same problem psa has with their front trunnions. psa tries to counter it with the tightest head space they can possibly get. but they end up having the same problem.
Whatever tool you are comfortable with I think is fine. I guess I said grinder because I’m used to using one at work. Im fine with a grinder but a file or dremel with a sanding bit is totally fine. Especially if you dont use a grinder for hours a day.
Hey brother, I was wondering if there was a good place that I could show how I profiled the corner of my zastava m70 trigger to make the cam function for me.
Absolutely. Kalashkamaz on instagram. I would love to see what you did. Sometime this week I’m also going to do a comparison between a couple brands and actually install one. Probably gonna go in my M85.
@@Kyle-si8yw I think they all work great. Im working with Alfa because I like them, I like their version. Feels good. Id say grab whichever you feel comfortable with. I like the Alfa, Deez Nuts, and Harrison. I forget the other brand I tried but theyre all extremely similar, some are the same.
Kind of off topic but you know AKs so i figured id ask. Thank in advance :) .do you know if an ALG would work on a PSL? Hows the gun smith work going if i may ask?
@@mattmorrison9379 it would not drop in, but with fitment tuning you can get it to work from what I understand. I see no reason it couldnt, just wouldnt work out of the bag. Gunsmithing is going fan-freakin-tastic. My first AK build went out the door this weekend!
@@KalashKamaz I can confirm this on any aftermarket triggers on the AK DMRs. Lot of owners of the PSL and M-91 have added these triggers to their rifles.
Sure. Say as much as you like. I’m not sure what your point is. I got a lot more rifles than that and they all work perfectly whether they’ve had work done to them or not.
Frt?🤔 i would be scared to even buy one of these is it even worth the headache because a month or two from now the gestapo is gonna be knocking on doors
@@workingclassless84 Not yet. Its in the works. Unfortunately I cant yet talk about the future of Alfa quite yet but obviously yall will be the first to know!
@@KalashKamazbro that wording sounds like you know something that will make the company disappear like something bad…. But that angry smile emoji makes me also think we’re in for a treat…?
My PSA gf5 shit the bed after 250 rounds. Makes me appreciate my vepr even more. Some bad talk zastavas but I have two and never had issues. That gf5 will be going down the road once it gets back from PSA. They replaced everything…I gave em a chance but I use my guns and take them very seriously
@@Grizzlyman420 firstly, amazing username. A1. Secondly, yeah. Piece of junk. Now that Im building, I won’t even work on a PSA. I have a 103 Im seeing what I can do with. Its actually an example with some good QC but the wear & tear is ridiculous. Gonna need a new bolt and carrier. The FN barrel is the only thing in spec.
@ thanks man 😂 I held off for yearsss with these AKMs from PSA…finally took the bait on a GF5 and I was disappointed. I have 4500 through my one M70 and the internals look brand new still. That gf5 was beat to 💩 lugs on the bolt were rounded over etc. I wanted it as a beater gun ya know maybe get 10k through it but she couldn’t even hit 1,000 😂 might have to get another WASR and call it good. I had a WASR years ago, never cleaned that damn thing and it ran. She wasn’t pretty but of course I changed the furniture out.
@@Grizzlyman420 WASR’s are great! I like Nova kits a lot too. Atlantic has all sorts of Romanian kits for a great deal right now. Mishaco also has another Wasr3 223 for sale right now!
@ it’s always a revolving door, honestly. I would say my main guns are my Saiga, M85, and Jack. I’m currently building another WBP. Absolutely fantastic parts kit for new production. Great receivers. Not too much work needs to be done to get them in perfect spec. I do really love the Romanian stuff as well. They are honestly perfect for a KNS piston due to the oversized gas ports. I’m thinking the next kit I get from them is going to be one of the milled Bulgarian kits. There are a lot of great options. I think probably the best deal on there right now for a 762 gun is the WUM1’s. For 74, those Aims kits. They also sell 556 Aims barrels. You just need to find yourself a Beryl bolt.
@@jefferyboring4410 a lot of people don’t know that and a lot of people that are interested in forced reset triggers don’t know that. Go check out the super safety sub Reddit. It’s brutal. A lot of them know nothing about their guns. Think of the demographics buying them.
Oh no... not the dremel, dremels and people without the experience is a disaster waiting to happen id say file youd be alot less likely to ruin something with a file
@@willthompson9073 Id personally never recommend one shotting something if youre not familiar with the tool. Id personally use a grinder because Im comfortable with that but unless you use one 7 days a week like I do, yeah…file.
Because Internet. There’s nothing wrong with the damn gun at all. It’s properly built, it’s solid, it’s accurate. I’m not sure what more you want. It ain’t the best thing on the market or nothing but I give credit where credit is due. It’s a good AK. I said pretty explicitly this is sample size of one, but this is a damn good gun.
I printed one of these and found that my wasr, saiga, and zastava all needed assistance with fitting with shims or required trigger work, most luck I had was with ALG triggers but the guns were prone to running away due to the cam beginning to wear down and being stuck into place or had failures to feed or not getting hung up and not going into battery (especially with the zastava) all in all if you have experience under your belt its a cool little range toy but is very difficult for most people to enjoy due to the 2+ hours of troubleshooting it requires or more depending on knowledge and compatibility. You hit the nail right on the head with your video and hopefully they'll make advancements to the design in the future.
"All Aks are different". Yeah, no joke ! I have been trying to tell the collective AK community this for decades with varying degrees of success. This applies to just about every part including magazines ...
Can you elaborate on the mag part? Like for example, amound 7.62x39 AK variants which ones are not compatible? I thought they were ALL interchangable...
@@Letmechill4asec between the mag catch and the mag well there are variances. With a 762/545 rifle the worst you’ll find if it’s still usable is just a tight magwell or not enough taken off the mag catch. With a 556 gun you’re really only gonna run into compatibility issues with steel magazines. Some of them are a bit tight but as far as compatibility, there is not a ton of issues. Usually just not enough tuning with the mag well and mag catch.
Century is notorious for not cutting their mag catches correctly and having some pretty tight wells.
Rifles come in single stack and have to be opened up. This is not true of the pistols like an M92 or mini Beryl.
@KalashKamaz nice.. thanks for this info
@@Letmechill4asec Magazine fitment and function is a magazine by magazine and a rifle by rifle issue. If me and you have rifles from the same factory that are 1 serial number different then what works on my rifle may not work on yours. It’s almost as if it depends on the quantity and quality of the local booze that the builder imbibed that day. One of my rifles detests Bulgarian commercial magazines that the collective hive mind claims are the bees knees. They turned my rifle into an expensive straight pull. I have Polish magazines (Again according to the hive mind, supposedly high quality magazines) that will fit and lock into my mag well, but won’t feed. I have rifles that love Croatian, Tapco, and Promag (supposedly some of the worst, according to the hive mind). My 7.62 rifles run well the Korean KCI 20 round magazines but not the 30. For an upcoming 2gun match I am running a combination of Bosnian A.C. Unity, Zastava Polymer, Magpul, Promag. Listening to the hive mind, I’m not getting past the first stage with those magazines. What you have to do is buy one or two magazines of a particular type and test ‘em hard. If they fit and feed reliably in your rifle then buy more of that type. If not well you now have a small number of drill and dry fire magazines that you didn’t dump a lot of cash into.
@@winkleriedI've seen the hate on Croatian mags, but my AK loves them and the shelved follower that catches the bolt on empty feels at home on the M70
Drop in for AK is like bolt on for a car
Oh my God is that the greatest analogy. I wish I would’ve thought of that myself.
If you want drop in for an AK, you’re gonna have to spend a lot more time on R&D. With cars, thats why brands like HKS cost a fuckin ton and you STILL may have to do some fitting.
@KalashKamaz right, It may bolt on eventually, but it's going to take some work
@ the work is in motion, it’s just gonna be a second. I’ll be very very pleased when I can talk about that. I think everyone else will too.
I have the Super Safety for my AR15 and much like the AK, it’s not a simple ‘drop-in’. Material removal on the trigger and a different safety detent is essential for proper function. That being said, now that it’s in, it’s been flawless. I know AR to AK is apples to oranges, but you’re smart in alerting people to the need to understand this is anything but drop in.
Thank you! I’m very much looking forward to getting an AR FRT. Im thinking its going in my T91.
I love that ridiculous rate of fire with the AR SS.
@ - You’re going to love it. I have the Hoffman Tactical SuperSafety in an 11.3” pistol build my buddies made me for surviving spinal cancer. I wish I could post a pic - it’s so badass. The function has been absolutely flawless. I’m going to buy a complete Bore Buddy .22LR conversion with the SS trip kit. This thing in 22LR is going to be a hootenanny, but as it sits in 5.56, it just makes you laugh endlessly and forget the .48¢ a round - lol. Happy New Year!
@ congratulations on your survival! That’s fantastic to hear.
Have you had any luck with those conversion kits? I had a 22 LRAR but it was factory. One of the Walther-Hammerli’s. Unfortunately, I had to sell it to pay for a lawyer.
@ Thanks! Every day above the dirt is a good day! I have an original Ceiner .22 LR kit and while it’s getting long in the tooth, it’s still semi reliable. I have a friend with a CMMG kit and his has been great, though I heard some folks have trouble with them. Bore Buddy is a great site. They have upgrade spring kits for the CMMG and Ciener kits. For $249 + the SS trip, it’s worth it for me to just start over. The spinal cancer left my fingertips numb, so doing intricate work isn’t worth the hassle. My rifle building days are likely over, but no complaints man - I’m still alive.
@ Man, I hate having to sell shit for legal woes. Been there man - I hope it’s all resolved and behind you.
Nevermind I spoke too soon. You answered it.
I have the mars frt and it didn't come with the jig.
My mars kit works awsome but I am really interested in the SS version. Why is the cam on the SS weird shaped on the side?
@@Kyle-si8yw Theyre all essentially the same. The can is like that to allow your safety to rotate.
Sexorcisto is one of the best Heavy Metal albums ever! The drummer & bassist are in the pocket the whole album!
Great vid! Here's a question that NONE of the SS makers have answered/replied. Can these designs work in a Chinese receiver? Does the 1.5mm vs.1.0mm thickness matter? Keep up the first class work!
Tried on a GF3 UF no luck, bent rod and out of battery dry firing. Could not use in a wasr 10 either as the trigger was shorter then one provided. May just need to wait for a drop in the future.
Punk rocker by day Ak wizard by night
Thank you i already got scammed with these Ak triggers 400 bucks down the drain. Should have just bought that new meridain trigger
WTF? Who did you buy from? I can definitely guarantee you Alfa and Deez Nuts are not a scam at all. Harrison either.
Did you happen to pre-order from trigger Empire? Thats the scam company selling them for that much.
That would have been Konos Trigger empire. The scammers that were getting triggers from Marz and pretending they made them. Scam about 100 peeps from what I heared.
@@180filoSX Theyre still doing it. Trigger Empire is still at gunshows and “Texas Triggers” is releasing videos with the Mars Trigger and calling it the “Diablo”. The “Diablo” is apparently like $350. I dunno, they gave a bunch of wacky prices publicly.
@@KalashKamaz I just never got mine to work . But the dude i got it from legit
The dimensions in a cad file are the dimensions whether you print it or cnc it. Whether it comes out to those dimensions as another story, but that’s going to be a variable from equipment to equipment, not the file itself.
@@D45726Lkthsc Man, I was just trying to use simple language. Im not gonna go through a CNC seminar. Thats why I said ‘to work with their CNC’.
Im a manual machinist anyhow. I wouldnt use the best language even if I did go through how its adapted.
All u need is the alg the ak will do the rest.. goes brrrt all day no frt needed.. its cool and all and i wana try one but seems too aggravating.
@@shaundraco308 oh there is a follow up coming soon. An ALG definitely does not go brrrrr. It’s no more aggravating than anything you have to do doing basic gunsmithing.
There is a reason I was upfront that I am working with Alfa. It is a completely different design, requires much less tuning, and there is currently a version 2.0 in development.
I’m just not going to make any claims on what we are doing with 2.0 until we are far further and have a prototype, but I will say the thing we are trying to get to is aggravation free.
great video, brief and to the point...do you know if i can fit one of these on my Riley Defense RAK308?
With a dremel you can make anything fit. The Mars trigger is a different design completely. Id go with that for a 308.
@@KalashKamaz thank you i apperciate it
Would this possibly be easier with a Milled AK receiver? Possibly more robust. Idk just thinking out loud. 😊
No. Milled or stamped doesnt matter really at all. Itll still need tuning. Those variations will exist brand of receiver to brand. Itll likely be more consistent, but AK receivers in general are a nightmare.
@@KalashKamazsome stamped might have rivets behind those rails which is no good
@ are you talking about the center support or the rivets for the rear trunnion? I have not seen either of them interfere yet.
@ oh yeah, the center support isn’t an issue. Just off the top of my head. The only one I can see maybe even causing an issue at all would be a 100 series rear, but I just did one this weekend and it didn’t interfere. I could see it happening now if the trunnion is not installed correctly.
It would help if you had all the parts, Pete sells an incomplete kit based on what he could steal at the time.. What Kalashkamaz is not telling you is that the Alfa trigger is a bootleg with dimensional issues.
Are these FRT kits more reliable than the MaRs FRT Kit from Alfa?
The Mars Trigger is an FRT. I think it’s a more reliable design, but I don’t have enough rounds on one to comment on practical reliability. I’m doing some testing as I plan to run one at KB.
In light of your newly acquired gunsmithing experience, what's your opinion on that Riley? Has it changed since the review you made on the one with wood furniture?
@@Jason-co9ep that’s the same gun! Literally, the only thing I have found is that it doesn’t seem to like certain steel mags. They lock in just a tad bit too high. Could fix it, but I generally use polymer mags anyway to save some weight.
@@KalashKamaz Thanks for the reply and the non-sponsored, no nonsense AK content. Hope your 2025 is awesome!
I'm not an expert gunsmith but I can tell you that most of the riley parts are ok/mediocre but the front trunnion is slightly out of spec.
@ I havent had any huge issues yet. The parts, fine. The front trunnion works. What did you find out of spec?
@@KalashKamaz Specifically the 7.62 krink, the trunnion lugs should be about 90 degrees. so the slope on the bolt can lock in to maintain headspace. so their bolts are to spec but their trunnions are off since the lug on the right side is backswept slight instead of being 90 degrees. In other works it only make contact with one side of the bolt instead of being contacted at a perfect 90 degree angle. The problem is it causes headspace growth, it's the same problem psa has with their front trunnions. psa tries to counter it with the tightest head space they can possibly get. but they end up having the same problem.
I dont think a grinder should be used. I think a file works the best so as not to take too much off.
Whatever tool you are comfortable with I think is fine. I guess I said grinder because I’m used to using one at work. Im fine with a grinder but a file or dremel with a sanding bit is totally fine. Especially if you dont use a grinder for hours a day.
Maybe you can answer this . Can you use that frt in a Galil Ace ????
Maybe never seen inside of a gali but I know they are very similar
You could, but you’re gonna have to do some heavy fitting and lose the thumb safety. I have not tried a Mars trigger though.
Serious duty use needed. You are bringing back binary nightmare memories on my AR.
Hey brother, I was wondering if there was a good place that I could show how I profiled the corner of my zastava m70 trigger to make the cam function for me.
Absolutely. Kalashkamaz on instagram. I would love to see what you did. Sometime this week I’m also going to do a comparison between a couple brands and actually install one. Probably gonna go in my M85.
Do you think the ss bar is better than than the mars rod?
@@Kyle-si8yw I think they all work great. Im working with Alfa because I like them, I like their version. Feels good. Id say grab whichever you feel comfortable with. I like the Alfa, Deez Nuts, and Harrison. I forget the other brand I tried but theyre all extremely similar, some are the same.
the fun running trigger
Kind of off topic but you know AKs so i figured id ask. Thank in advance :) .do you know if an ALG would work on a PSL? Hows the gun smith work going if i may ask?
@@mattmorrison9379 it would not drop in, but with fitment tuning you can get it to work from what I understand. I see no reason it couldnt, just wouldnt work out of the bag.
Gunsmithing is going fan-freakin-tastic. My first AK build went out the door this weekend!
@@KalashKamaz nice dude, congratulations on the build. Thanks for the feed back.
@@KalashKamaz I can confirm this on any aftermarket triggers on the AK DMRs. Lot of owners of the PSL and M-91 have added these triggers to their rifles.
I have 5 AR rifles and they all work perfectly and have had no work done to get to work properly should I say anymore...
Sure. Say as much as you like. I’m not sure what your point is. I got a lot more rifles than that and they all work perfectly whether they’ve had work done to them or not.
Uh website?
@@kingjay607 marstrigger.com
Half of glock barrels arent drop in
Frt?🤔 i would be scared to even buy one of these is it even worth the headache because a month or two from now the gestapo is gonna be knocking on doors
@@willthompson9073 BRO! Buy an Akm parts kit n finish the mission n hush
Lol sorry
No but seriously does anyone forsee it being an issue
No not anymore. Possible but probably no. @@willthompson9073
@willthompson9073 Who knows but don't let fear run your life bud
why not a mars trigger ?
@@susanmcpeterson1136 I have that too.
@ are they reputable ? Or ya wouldn’t trust a mars trigger over a super safety?
@@susanmcpeterson1136 Theyre reputable.
@ niceee
Do you know if anyone makes a three position?
@@workingclassless84 Not yet. Its in the works. Unfortunately I cant yet talk about the future of Alfa quite yet but obviously yall will be the first to know!
@KalashKamaz You just made more questions that need answers....😂
@ I know. 😈. Soon.
Yes its called "the boogie hook, if you want safe, binary, and single. Can you use your original safety
@@KalashKamazbro that wording sounds like you know something that will make the company disappear like something bad…. But that angry smile emoji makes me also think we’re in for a treat…?
Thanks for "Trigg-a-Nar" K.K. !
sick white zombie shirt dude
bruh where do I even buy FRT's
@@imperialhonorguard1483 marstrigger.com
This is a real website I’m scared to get scammed
It's legit 👌
Lol yeah drop in AK parts are like drop in 1911 parts
@@samsham8218 we do a lot of 1911s at my shop. It’s incredible how many people don’t know how much fitting goes into a properly built 1911.
Got to love tx weather I’m in east tx don’t like the weather wait 10min
Amen to that. A wall of rain then 85 degrees. Ffs this state…lol
Wind has switched to North in Cen TX, fall next week, winter week after.
59 degrees in NH today. Felt like spring
@ That sounds nice. It was like that here a day ago LOL. Freakin Texas…
My PSA gf5 shit the bed after 250 rounds. Makes me appreciate my vepr even more. Some bad talk zastavas but I have two and never had issues. That gf5 will be going down the road once it gets back from PSA. They replaced everything…I gave em a chance but I use my guns and take them very seriously
@@Grizzlyman420 firstly, amazing username. A1.
Secondly, yeah. Piece of junk. Now that Im building, I won’t even work on a PSA. I have a 103 Im seeing what I can do with. Its actually an example with some good QC but the wear & tear is ridiculous. Gonna need a new bolt and carrier. The FN barrel is the only thing in spec.
@ thanks man 😂
I held off for yearsss with these AKMs from PSA…finally took the bait on a GF5 and I was disappointed. I have 4500 through my one M70 and the internals look brand new still. That gf5 was beat to 💩 lugs on the bolt were rounded over etc. I wanted it as a beater gun ya know maybe get 10k through it but she couldn’t even hit 1,000 😂 might have to get another WASR and call it good. I had a WASR years ago, never cleaned that damn thing and it ran. She wasn’t pretty but of course I changed the furniture out.
@@Grizzlyman420 WASR’s are great! I like Nova kits a lot too. Atlantic has all sorts of Romanian kits for a great deal right now. Mishaco also has another Wasr3 223 for sale right now!
@@KalashKamaz I’ve been looking on Atlantic! What are you mainly running right now ?
@ it’s always a revolving door, honestly. I would say my main guns are my Saiga, M85, and Jack. I’m currently building another WBP. Absolutely fantastic parts kit for new production. Great receivers. Not too much work needs to be done to get them in perfect spec.
I do really love the Romanian stuff as well. They are honestly perfect for a KNS piston due to the oversized gas ports. I’m thinking the next kit I get from them is going to be one of the milled Bulgarian kits. There are a lot of great options.
I think probably the best deal on there right now for a 762 gun is the WUM1’s. For 74, those Aims kits. They also sell 556 Aims barrels. You just need to find yourself a Beryl bolt.
JUST MAKE UR OWN Ak FRT! Buy a parts kit! Do what freedom is 😂
@@KaydBenavides You could certainly do that too. You’d need a lathe and a mill, some round stock and flat bar.
@@KalashKamaz Abolish NFA!
Everyone knows a frt especially ak ! Is definitely not drop in . Even ak parts aren’t drop in.
@@jefferyboring4410 a lot of people don’t know that and a lot of people that are interested in forced reset triggers don’t know that.
Go check out the super safety sub Reddit. It’s brutal. A lot of them know nothing about their guns. Think of the demographics buying them.
Oh no... not the dremel, dremels and people without the experience is a disaster waiting to happen id say file youd be alot less likely to ruin something with a file
@@willthompson9073 Id personally never recommend one shotting something if youre not familiar with the tool. Id personally use a grinder because Im comfortable with that but unless you use one 7 days a week like I do, yeah…file.
@KalashKamaz 👍🏻 I'm a machinist and I've saw people really get in trouble with a dremel but yeah
Riley defense 🤮
I thought those were solid AKs.. why 🤮?
Because Internet. There’s nothing wrong with the damn gun at all. It’s properly built, it’s solid, it’s accurate. I’m not sure what more you want.
It ain’t the best thing on the market or nothing but I give credit where credit is due. It’s a good AK. I said pretty explicitly this is sample size of one, but this is a damn good gun.
That is an ol school white zombie shirt. Never seen another one. Had Rob Zombie sign mine at ozzfest in 2002 and framed it
Defcad wack
fedcad