Nice video,, in order to make my recon gold turnkey manual lockout instead of the remote I need to replace the motion control cartridge and not just the key itself correct???
7 лет назад
Maybe take a look at this document ;) docs.google.com/fileview?id=0B1AoGIWBz4H1YWNhYWRkODYtNzRiNi00YTA1LTlmMjctNmQzOWQwMDdiZGFl&hl=en
7 лет назад
I'm about to do the same to my Reba RL. The PopLock is driving me nuts...
What do you mean under motion control work? When the lock out turned off, orifice is open and oil fluids towards the motion control chamber. When the lock out turned on, orifice is obviously closed. Unless you have Gate turned on Cheers
@@wawawewwa Does the motion control work when its not in locked out mode? I dont understand the system. Motion control is oil pushing against the closed lockout and not getting in to the rubber buffer but pushing against the buffer with the lockout-piston right.
@@StefanvanOrizande if lock out is off, it is slowering the compression. so oil fluids through the orifice and kinetic energy turns to resistance and warmth
The thread is quite long and narrow, so will take some turns. Possibly already loose and you just need to wiggle it out by gently pulling and twisting.
love the wooden fork holder...smart man :)
Brilliant! Very informative
I would never use brake cleaner on the fork internals! Use isopropyl alcohol. It's less abrasive.
good job! simply cleary nice
Dzieki!
Thank you!
nice job
внутреннюю поверхность ног необходимо так же смазать на глубину примерно 6 см густой смазкой по типу пм600
What are the oils and lubs you are using I saw the small tube. Do i need that??
Under the blue cap... that control the lockout... you missed one white shim!
Nice video,, in order to make my recon gold turnkey manual lockout instead of the remote I need to replace the motion control cartridge and not just the key itself correct???
Maybe take a look at this document ;) docs.google.com/fileview?id=0B1AoGIWBz4H1YWNhYWRkODYtNzRiNi00YTA1LTlmMjctNmQzOWQwMDdiZGFl&hl=en
I'm about to do the same to my Reba RL. The PopLock is driving me nuts...
How many ml youbadded at the upper suspension?
5ml
That thing looked a little short on oil when you first opened it up
5ml only
i have a reba rlt 2013,26er,how much 5wt oil i should put in the damper,100ml?
5ml
Does motion control work when the lockout is off? So when the oil can flow easily through the orifice
What do you mean under motion control work?
When the lock out turned off, orifice is open and oil fluids towards the motion control chamber.
When the lock out turned on, orifice is obviously closed. Unless you have Gate turned on
Cheers
@@wawawewwa Does the motion control work when its not in locked out mode? I dont understand the system. Motion control is oil pushing against the closed lockout and not getting in to the rubber buffer but pushing against the buffer with the lockout-piston right.
@@StefanvanOrizande if lock out is off, it is slowering the compression. so oil fluids through the orifice and kinetic energy turns to resistance and warmth
Please help when I try to uncrew the damper it just keeps spinning😭😭. What am I doing wrong.
The thread is quite long and narrow, so will take some turns. Possibly already loose and you just need to wiggle it out by gently pulling and twisting.
@@mikaelvergult4120 You were right.
How do I just add oil? Do I just unscrew the top peice and add a little...is that all
well it depends on the fork but on some forks its simple as that. but you need to choose right oil and right amount.
Would this be the same for a RockShox Sektor?
Yup
white tube of lubricant that?
+Кирилл Иванов pramax power grease from rst
While I can appreciate her efforts and producing this video I personally do not like video without dictation or direction
Hi I'm looking for a video on Rockshox Recon silver TK coil. I would like to knox if this forks is one?
whish is the diference between TURKNEY / MOTION CONTROL / CHARGER 2 DAMPER ¡??¡V
use gloves for your health