Installing 3500lb Winch on Polaris Sportsman 570
HTML-код
- Опубликовано: 2 окт 2017
- I install the Polaris Accessories 3500lb winch on my Sportsman 570 EPS
For Parts and Accessories: www.gobigparts.com
Follow us on Facebook: / gobigparts
Instagram: / gobigparts 
Авто/Мото
Great vid! Just what I was looking for as I’m installing a winch on my 2013 550 Touring & was curious about the wiring part. Thanks for sharing...very helpful!
Good video. This will help as I am installing a 3500 on my 2015.
I like the grille, with the mesh trimmed out to accommodate the winch. Nice touch.
Whts it look like
Great video and very informative! I liked the idea of cutting out the winch plate and reusing it! Great idea
Thank you and thanks for watching.
Nice work....clean factory look.
Excellent install video sir, thanks for sharing and Keep up the fun videos, Subbed you as well.
Thanks, I will be adding many more. Please feel free to provide feedback.
That looks good
Looks good
Thanks for the video. I have watched it several times. I am going to be installing my winch on the same vehicle this spring. If I understand it correctly you connected the two wire adapter coming from the contactor and connected it to the 570's wiring harness 2 wire adapter, and then connected the handlebar rocker switch 3 wire adapter to the machine's wiring harness? If I understand correctly the handlebar wiring was already prewired to the ignition wiring? Thanks
Your correct
Great video, very instructive, I plan on putting a winch on my 2018 450 and it looks identical, only question I have is how and what did you use to cut out the hole in the front, I think that looks awesome like that. Thanks alot
I believe I just kept going around it and scoring it with a retractable razor knife like you would get at a hardware store.
Oooh ok that's sounds like it would work and be pretty simple, thanks for the fast reply!
Not too bad because the material is already thinnner around where you make the cut just for that reason.
Good vid, did the winch bolt right up to the frame of the quad or did you have to install a bracket for the winch. I'm planning on installing a winch for plowing snow.
Bolts right up. No additional bracket. We now sell KFI ones for Polaris that are plug and play
That Milwaukee fuel impact tho. Very nice. Thanks for the video very helpful.
Thank on the advice but just so you know you don’t haft to cut it out you can just take the body pins out on the and the grill will come off
Correct. I stated that but I wanted a cleaner look so cute it out so I had a smaller opening around the winch.
Great video! Thank you! What did you use to cut out the grill?
I beleive it is scored from the factory. So you just keep going around it with a razor knife until you cut through and it pops right out.
Noticed you passed the cables close to the radiator, any issues so far? I’m just concerned with the heat on the wires. But there doesn’t seem to be another way to pass the wires... any tips?
I looked at it last night and the wires pass around the outside of the radiator and then a ways behind it. They are not touching the rad and one of the wires are in a loom. I have had no issues. The stock voltage regulator and wires for it are closer than my winch wires. No issues.
How much was the winch?
Will any winch fit or are bolt holes set up for a polaris one. Thanks for posting. Just bought a 2017 570. First thing i did was a battery tender now its winch time. Definately like the grill panel on. Thats what ill do.
You would need to find a mount kit for what ever winch you purchase. Then do your own wireing. That is one reason I just went with the Polaris one. Plug and play.
Doug Penner all you need is the Polaris mounting plate but any ATV/UTV winch will work. My question is if the orange wires are your ignition wires in a 2017 sportsman
I used a multi meter on the post terminals under the cover in the storage box to see which one had power when turning the ignition on. If you follow my video I installed it on the that one.
Hi Doug. I wanted the Polaris winch for the simplicity of wiring and mounting, as everything is already plug and play. That said, up here in Canada the dealership wants nearly $700 for a 3000 lb. winch kit. I went on Amazon.ca, purchased the mounting kit for $50, went to Canadian Tire and bought an ATV winch (4000 lb. Warn knock off made for Canadian Tire) for $150 on sale, went through Amazon to upgrade to a synthetic rope ($35) with a line stopper ($12) to make it lighter and less prone to rust. Because this was an actual atv/utv winch, it came with the mini rocker switch and everything needed to do a stealth install. It took about 45 minutes to mount and set up the winch in the bracket with the fairlead. (The Polaris bracket also comes with hardware). The only drawback is the wiring included is longer than needed, as it is designed to go to the back where most manufacturers put the battery. You can either loop it up or shorten it and install new loop connectors. Following the above video, it is a snap to install and I saved over $400 from using the Polaris set-up. The only difference is when you choose a winch, the Polaris mount is designed for the universal 4 hole mounting pattern. Make sure the winch is going to line up. Also, Polaris winches for the 570 are inverted from the factory, so conventional winches will mount upside down. No biggie, just the stickers will be upside down and you need to run the winch line completely to the end and re-set it in reverse (or just be aware that the button in/out will be backwards). Saved a ton, for a little bit of extra work, and got an extra 1000 lb. capacity (overkill).
@@MrMjrRage I'm also in Canada (BC) and its outrageous how much polaris wants for a winch! I havent bought the machine yet, just getting ideas of add ins! The 570 premium here is $9555 plus the tax.
Im wanting to get one for my bike to it looks preaty easy i have never put one in so i dont know what to expect are do i need to know my wires i dont want some body to do it and charge me for it get back with me mark thank you
Mark Paez Jr pretty much plug and play. Red goes to positive black to negative.
How much did it cost
What model and part number, just bought a 2016 570 efi sp, needs a winch...errrm wench 😂
Did you need to disconnect the battery at all? Just asking I have to install my 570 winch tomorrow
Could have but I did not. Always safer if you do.
@@gobigparts Thank you great video.
@@gobigparts I did the same way you installed yours this afternoon, worked perfect. Only issue will be the 100 hour diff service, I will have to unbolt and pull winch forward to access the fill plug..
Did I miss you disconnecting the battery, before you started the install process?
I missed that. Yes, always disconnect your negative cable from battery.
Kinda hard to here you is this a Polaris winch I bought same machine would like put one on it
Yes Polaris winch like package shows.
Missed that part awesome thank you
Good video bud
But its winch not wench every time you say it think wife is gonna come out and hit you with a shovel lol
shaun schollaert You noticed that. My wife always correcting me. Lol. She can be a real wench then I have to use the winch. The quad that is.
Where did you purchase your winch?
I have a comercial account through my dealer. I can quote one for youif you would like.
Go for it
Shoot me an email at randy@gobigparts.com and your zip code.
What your opinion on the 570?
Love it.
@@gobigparts no issues at all?
Can not hear what you are saying
Yeah, I need a different camera I think that can have an external lapel mic or something plugged in.
W i n c h not wench
WINCH not wench! Get it right.
Made in China!
Probably just like all of our gear.
@@gobigparts ! All you conservatives hate Socialism, but don't mind giving American Bucks to a Communist country! LOL!
@@j.whisper2379 not everyone in the US is a conservative.
@@gobigparts ! So, are you a liberal? Many people that are partial to mudding with ATV's are from the South. At least that is my impression from the videos. The south is a big part of what we call the bible belt. The bible people tend to be conservative, anti vaxxing, science hating, climate change denying, evolution deniers who support Trump. Look at Florida and Texas. But as long as you can get your toys from China, things are cool??
@@j.whisper2379 I usually shy against political talk on my youtube channel, but if you want to send me an email feel free. I don't live in the South much further North. YOu can find my email address on my gobigparts web site.