Tisas Zigana Px-9mm after 10 months and 1120+ rounds. Sig P226 Mec-gar magazines, Smith and Wesson full size sights. XS big dots. Size comparison to a Glock 19/23
These Turkish guns are built to NATO specs the gun is tight from front to back with a heavy duty guide rod they seem to be more accurate with 124g rds but I run 115g too and shoots good
I have the 1st gen version, w/ 15rd mags. Only issues it ever had, was rear sight was far left out of the box, and the night sight didn't work. Only the rear ones glowed. I lightly filed some of that squared trigger guard down too, as it was chewing my next finger knuckle. Very accurate, and fed anything I tried.
My front night sight doesn't glow out of the box either. I called sds and they said they unfortunately don't import them anymore for the first generation. I have to find a sight that fits now.
It’s a great quality firearm... I have the PX9 that came with 3x18 rnd mags, speed loader, cleaning brush, retention holster... Paid $299.00 + free shipping... There is no better deal out there...
Yup, Everyone that has shot it can’t believe how well it shoots and the cost. The shop I bought mine from has sold about 400 of them and they started offering them with tru glow night sites that they install. (After I informed them the S&W sights fit). They said they are having a hard time getting them due to increased demand. I’ve seen one other shop selling them locally and they were priced at 399.....
Better review than a lot out there. I think the stippling looks great...especially for a home-job. You should do a vid on stippling. I dare say that most folks have at least one, “budget,” gun and wouldn’t have heartburn doing a self-stipple.
That’s exactly why I did it. I’d never attempt one of my 1K dollar builds or a shadow systems, etc. I actually ended up doing my OG xds45 after this one. It turned out kinda crappy looks wise but made the feel much better and the sharp factory edges don’t dig in anymore under recoil. I won’t be making any stippling videos but for a 300~ish dollar gun, why not?
Just picked one up and just ordered my trijicon S&W night sights! Great review and definitely and have subscribed! Need to find a video on how to disassembled for cleaning.
have one since May of last year. i replaced he front sight with night fision sight with orange ring, very bright. about 400 rds through it and no failures. nice gun for the money. i have the phil. national police logo on the gun. paid $279.00 with two 15 rd mags. i stippled the backstrap and talon grip tape around the grip.
@Lewis Thompson i saw on the gun collective channel yesterday . Sds import just release a gen 2 px9 with a magwell and different design on the grip. Still the same gun
Picked up 2 gen2 ones from CenterfireSystems a while back for $199 each. Put a streamlight tlr-1 on them and keep one in the nightstand and one downstairs by the front door!
I'll be getting one of these soon. I have a tisas 1911 that I absolutely love. Want to add a 9mm that would be a bit more practical for concealed carry.
Hey man great video I’ve had mine about two months very first time it jammed but I reloaded and been shooting it haven’t had any issues any more it shoots just as good as my Glock 19 and I love this budget gun it fits your hand great I just left my sights on here and there pretty accurate mine opinion great gun!!
Hey man, not a bad video. I have the px-9 and I bought the DXT2 sights you recommended in the description. My front sight doesn't have a "slide" on the bottom just a screw. And the slide for my rear sight is too small. I see on yours, the rear sight slide sits snuggly in there but its almost as if these are the wrong sights. Its just hard to find much on this gun anywhere, I'm confident I have the same gun as you, and that I bought the right sights. Hope you can help at all
There’s a couple versions out now. The gen 2’s have much better grip texture to them. The gen3 is totally different design from what I hear. Glock compatible sites and whatnot. Can’t beat them for the money.
Not a bad handgun that takes M&P Sights, XDM Holsters & 226 Mags...🤷♂️ The OD Green Version is $299 on sale at PSA now. I'd buy one but I have too many full size Handguns (never have too many) just looking for smaller ones like the 365xl optics ready type handguns
Hello good video, I have two questions: 1. with ammunition of how many grain does this gun work better.? 2. I can shoot ammunition + P with this weapon, without damaging it.? I await your answers. Thank you. Greetings.
This gun utilizes sig sauer P226 magazines. They come in a multitude of sizes from 10rd to 24. The ones made by Mec-Gar (Italy) seem to be the best in my opinion
Yes. Because your tarsus takes sig 226 mags. They aren’t Taurus mags. Next time you want to comment and offer advice, research before you make yourself look dumb.
Damn son thought this was just a gun is good or bad, this wore down , this is better than ____ at 1k rounds type of video. Thanks for the information shit hahah you did a company, gun, mag, 1k+ round review 🤣
@@Freakingstang hs9 is XD 9.... Many people believe that this gun which you are indicating is a clone of xd9 ( which is also called hs 9 outside USA) . Wanted to ask you which gun is a better one as soon as accuracy is concerned? Thanks for response.
There is a small pin you need to knock out from the top(1/16th punch). Then I think it was tap from left to right(larger brass punch). Mine came with a non functioning night sight, Tisas sent me a new one.
Has anyone had any issues with this gun, I want to get one but some of the comments on other videos stated some issues, for example one said after firing 170 rounds it threw/ ejected the magazine out. Others complained about double feeds and FTE's etc. So I am confused. Please help.
I have found most Turkish pistols do better with 124 grain or heavier cartrige for the first couple hundred rounds. After the break in, the will fire anything. This gun was the same for me. I love mine!
@@adeelbangash4379 I know your question was addressed to the author of the video, but please, *PLEASE* do not buy a Taurus. Please buy the Zigana if it is between those two.
They can be removed and replaced with a brass punch and a big hammer but it’s always recommended to use a site pusher tool. As far as I know, there isn’t any red dots out there at fit in a site dovetail. You’d have to have the slide cut for a red dot by a machinist or gunsmith.
You’d have to have the slide milled by a gunsmith or machinist to fit that mounting plate. It’s not going to fit without spending 100-200 to have the slide machined
XS sights. They offer many different styles. They basically originated the concept of a giant big dot back in the 90’s. Best sight for fast acquisition short of a red dot in my nonprofessional opinion
If you can’t afford 400 dollars for a pistol, you should probably re-evaluate your life, you shouldn’t comment if you can’t see any positive outlook on life and a 400 dollar pistol is outside of your means. How are you online if you can’t afford such a high priced commodity? 🙄 This was meant to provide inside to people looking at affordable firearms, and its exceeds its price point. God bless, you need it.
Are you For Real??? I Never had an issue with mine at all I've never had a single Jam and it runs better n shoots better than both my Glock or my Springfield XD 40..
![[DRAGON BALL LEGENDS REVEALS ＆ STUFF] LEGENDS FESTIVAL 2024 Special Edition Part 2](http://i.ytimg.com/vi/af0phKxitX8/mqdefault.jpg)
These Turkish guns are built to NATO specs the gun is tight from front to back with a heavy duty guide rod they seem to be more accurate with 124g rds but I run 115g too and shoots good
I have the 1st gen version, w/ 15rd mags. Only issues it ever had, was rear sight was far left out of the box, and the night sight didn't work. Only the rear ones glowed. I lightly filed some of that squared trigger guard down too, as it was chewing my next finger knuckle. Very accurate, and fed anything I tried.
My front night sight doesn't glow out of the box either. I called sds and they said they unfortunately don't import them anymore for the first generation. I have to find a sight that fits now.
Thank you for the very informative video. Loved it, mine has been great as well, got the gen 1 for $191 new on GB. Happy Pew Pew!
Mine has all three night sights. I removed the mag dimples and now have 17rds. No issues with the gun. Its over built. Very nice gun. Great review!
It’s a great quality firearm...
I have the PX9 that came with 3x18 rnd mags, speed loader, cleaning brush, retention holster...
Paid $299.00 + free shipping...
There is no better deal out there...
Yup, Everyone that has shot it can’t believe how well it shoots and the cost. The shop I bought mine from has sold about 400 of them and they started offering them with tru glow night sites that they install. (After I informed them the S&W sights fit). They said they are having a hard time getting them due to increased demand. I’ve seen one other shop selling them locally and they were priced at 399.....
Where did you buy it
@@stanleylzz3250 Kentucky Gun Co.
JUNK! Mine jams almost every round. The round hangs up on the feed ramp and tried different magazines
I got mine for $219 on sale for the Holidays!
Better review than a lot out there. I think the stippling looks great...especially for a home-job. You should do a vid on stippling. I dare say that most folks have at least one, “budget,” gun and wouldn’t have heartburn doing a self-stipple.
That’s exactly why I did it. I’d never attempt one of my 1K dollar builds or a shadow systems, etc. I actually ended up doing my OG xds45 after this one. It turned out kinda crappy looks wise but made the feel much better and the sharp factory edges don’t dig in anymore under recoil. I won’t be making any stippling videos but for a 300~ish dollar gun, why not?
Just picked one up and just ordered my trijicon S&W night sights! Great review and definitely and have subscribed! Need to find a video on how to disassembled for cleaning.
have one since May of last year. i replaced he front sight with night fision sight with orange ring, very bright. about 400 rds through it and no failures. nice gun for the money. i have the phil. national police logo on the gun. paid $279.00 with two 15 rd mags. i stippled the backstrap and talon grip tape around the grip.
@Lewis Thompson i saw on the gun collective channel yesterday . Sds import just release a gen 2 px9 with a magwell and different design on the grip. Still the same gun
How do you remove the front sight?
@@danahobbs24 push out the little pin and use a sight pusher to slide out the front sight and installing the new sight
@@user-jetmachinist i take it, punch from top to bottom right? These are a bitch to move lol. I just got some truglo bright sights for mine.
@@VisionJinx1 you need a good sights pusher and a lot of trimming to fit the new sights .
Just brought mines today for $249. Been eyeing this for awhile finally pulled the trigger💥💥
very informative.ordered mine last night when i read at their site that the slide and barrel are hammer forged.
Picked up 2 gen2 ones from CenterfireSystems a while back for $199 each. Put a streamlight tlr-1 on them and keep one in the nightstand and one downstairs by the front door!
I'll be getting one of these soon. I have a tisas 1911 that I absolutely love. Want to add a 9mm that would be a bit more practical for concealed carry.
These are looking more and more appealing. I heard about the Philippine contract, but wasn't aware these were being used by police in other countries.
BOUGHT MY SECOND THIS WEEK.
Hey man great video I’ve had mine about two months very first time it jammed but I reloaded and been shooting it haven’t had any issues any more it shoots just as good as my Glock 19 and I love this budget gun it fits your hand great I just left my sights on here and there pretty accurate mine opinion great gun!!
My Turkish shotgun (semi) was the same. I had a few jams in the first 2 boxes, none since.
Hey man, not a bad video. I have the px-9 and I bought the DXT2 sights you recommended in the description. My front sight doesn't have a "slide" on the bottom just a screw. And the slide for my rear sight is too small. I see on yours, the rear sight slide sits snuggly in there but its almost as if these are the wrong sights. Its just hard to find much on this gun anywhere, I'm confident I have the same gun as you, and that I bought the right sights. Hope you can help at all
You must have a gen 2 or 3. Those take Glock sights from the reading I’ve done. I don’t own one so idk.
Damn good review, I was in the market for a different pistol and ran across this brand. I think I'm going to grab one
There’s a couple versions out now. The gen 2’s have much better grip texture to them. The gen3 is totally different design from what I hear. Glock compatible sites and whatnot. Can’t beat them for the money.
Not a bad handgun that takes M&P Sights, XDM Holsters & 226 Mags...🤷♂️ The OD Green Version is $299 on sale at PSA now. I'd buy one but I have too many full size Handguns (never have too many) just looking for smaller ones like the 365xl optics ready type handguns
Dwelling on the PSA PX9 right now. Perusing the inter webs and trying to keep credit card in wallet.
Do you know if XD holster with WML work with the PX9?
I got a first gen without the night sights but two 18rd mags
Thanks for determining that M&P sights fit!
Ordered some fiber optics to install
tisaş zigana px9🇹🇷 👍
I have 2 of the gen1 both had 15 round mags and one of the front night sights didn't glow. So, I changed both front sights.
Hi I have the kc tisas zigana and it's really great I recommend
Good video, of how many grains do you recommend the ammunition, thanks.
8-13-21 Found ya from John Crump News, nice video! Very informative. Just got you to 400, love from Pittsburgh PA.
I work at the bechtel plant (shell cracker plant) in beaver/Monaca everyday…. I’m an Ohio boy tho. The church brew works dunkel is 110% awesome btw.
Hello good video, I have two questions: 1. with ammunition of how many grain does this gun work better.?
2. I can shoot ammunition + P with this weapon, without damaging it.?
I await your answers. Thank you. Greetings.
Yes + p work Great the Springs in this thing are made for the Heavier NATO Rounds 👍👍
I purchased the two 18 round clip version, the sight was visibly off and had to adjust it. Otherwise love the gun, and that it came in a hard case.
Is she still running good eating that brass?
Man I wish they'd sell that paddle holster separate, I don't like the odd, trigger guard holster that came with mine.
Any Springfield XDM holster works with the PX-9
@@123karismith even with a wml?
Just picked one up for 200.00 new and free shipping. Only came with 2 15 round mag and fixed sights. Holster is useless, I'm a lefty. Hope it works.
AIM has them on sale at the moment!
I just bought this for my first handgun mine came with 2 18 round magazines. Do I just buy any 9mm caliber magazines?
This gun utilizes sig sauer P226 magazines. They come in a multitude of sizes from 10rd to 24.
The ones made by Mec-Gar (Italy) seem to be the best in my opinion
Where did you order that Px9 from ? Sir
Amazing buddy
Do these take XD barrels? Triggers? Like for aftermarket upgrades
And if you have a Taurus G2c the mags will fit
Yes. Because your tarsus takes sig 226 mags. They aren’t Taurus mags. Next time you want to comment and offer advice, research before you make yourself look dumb.
G2 c mags will be too short !
Is there a set screw in the stock front sight?
Is the front sight pinned or set screw on the original sight? These are a bitch to remove.
Damn son thought this was just a gun is good or bad, this wore down , this is better than ____ at 1k rounds type of video. Thanks for the information shit hahah you did a company, gun, mag, 1k+ round review 🤣
Can you please comment which gun is more accurate at around 25 yards PX 9 or hs9?
What Is the hs9? I shoot 12” steel plates at a hundred yards. The gun is more accurate than you are, I assure you that.
@@Freakingstang hs9 is XD 9.... Many people believe that this gun which you are indicating is a clone of xd9 ( which is also called hs 9 outside USA) . Wanted to ask you which gun is a better one as soon as accuracy is concerned? Thanks for response.
any iwb holsters or owb for the px9
How do you remove the stock front sight on the px9?
There is a small pin you need to knock out from the top(1/16th punch). Then I think it was tap from left to right(larger brass punch). Mine came with a non functioning night sight, Tisas sent me a new one.
@@Contender-wk2kh NO NO NO just grab a large hammer and a sharp chisel LOL sorry just had to be a smart _SS LOL😁.
The p226 mags lock the slide back ?
Yes. It comes with mec gar branded P226 mags
Ofcourse
Has anyone had any issues with this gun, I want to get one but some of the comments on other videos stated some issues, for example one said after firing 170 rounds it threw/ ejected the magazine out. Others complained about double feeds and FTE's etc. So I am confused. Please help.
I have found most Turkish pistols do better with 124 grain or heavier cartrige for the first couple hundred rounds. After the break in, the will fire anything. This gun was the same for me. I love mine!
Fxs9..vs px9 plz help
WANT
How about steel ammo do they work well with it
I only shot 100 rounds of steel cased Tula through it as that’s all I had. No issues.
@@Freakingstang thx u so much for ur time
@@Freakingstang dear sir which shooting sound is good and hard tourus or zigana that one thanks
@@adeelbangash4379 I know your question was addressed to the author of the video, but please, *PLEASE* do not buy a Taurus. Please buy the Zigana if it is between those two.
@@dexm2010 ok dear thanks
Any aftermarket barrel for this px9?
I’m not aware of any, but I haven’t looked either. I assume you are looking for a threaded barrel? I’d contact SDS imports and see if they offer one.
Tripod please
fxs-9 pistol ahss is this the same pistol ?
Not the same. Grip is different and uses cz-75 mags.
Wo is best fxs9.vs. px9
En español podria ser 🤞 o subtitulado esque estoy interesado en una de esas
compare yo compre una y esta mamalona por el precio te la recomiendo
Makes me dizzy with the camera waving around.
Maybe you should make your own video
How hard is it to replace the rear sight? Looking to replace with Red Dot.
They can be removed and replaced with a brass punch and a big hammer but it’s always recommended to use a site pusher tool.
As far as I know, there isn’t any red dots out there at fit in a site dovetail. You’d have to have the slide cut for a red dot by a machinist or gunsmith.
@@Freakingstang I found this Ade RD3-006B GREEN Dot Reflex Sight + Optic Mounting Plate for Smith Wesson SW MP Shield SD9 SD SD40 MP SD40VE/Zigana PX9
You’d have to have the slide milled by a gunsmith or machinist to fit that mounting plate. It’s not going to fit without spending 100-200 to have the slide machined
What was the name of that site that you got your night sights from
XS sights. They offer many different styles. They basically originated the concept of a giant big dot back in the 90’s. Best sight for fast acquisition short of a red dot in my nonprofessional opinion
Dear how many barrel life
that magasine uses px-2 the others pistol
...if I had your money, I could burn mine...
If you can’t afford 400 dollars for a pistol, you should probably re-evaluate your life, you shouldn’t comment if you can’t see any positive outlook on life and a 400 dollar pistol is outside of your means. How are you online if you can’t afford such a high priced commodity? 🙄 This was meant to provide inside to people looking at affordable firearms, and its exceeds its price point. God bless, you need it.
This pistol is JUNK!
Constantly jams, total waste of money!
Yours is the oddball then. My runs like a champion and nearly all reviews are glowing.
Are you For Real??? I Never had an issue with mine at all I've never had a single Jam and it runs better n shoots better than both my Glock or my Springfield XD 40..
Did 300 rounds, brand new. Winchester white box junk and Remington brass target rounds. No issues at all
Break it in with 124 gr, ammo
What sights do you use i cannot find any for the zigana
Did you not watch the video or read the description?