I run two 8 ohms subs in series. They sound great i'm hearing sounds i never heard before wheni ran then at 8ohms. My amp runs cooler and i'm not turning up the gains or volume to compensate. I love it... it hits hard and feels different, Give it a try. The fact that i'm in bridge mode, may be the reason the power seems to still be strong.
I wanted studio series amp/ speakers in my car , due to the fact that me & by brother produce music & test it on the go sometimes..this came in the clutch amigo! thank you
Great overview. Coming from an electronics background, it all comes down to impedance matching. The source (amp) must match the load (speakers) if you don't want to damage/overload/underload your system.
Is it possible ( and how if possible ) to wire two 8 ohm speakers in one speaker box so the hook up wires for both of them ( to the amp ) will be at 8 ohms ( not 4 or 16 ohms ) ??? This question is for a two speaker box ( each with two 8 ohm speakers ) system. thank you !
If I were to build two speaker boxes containing two 18 inch 8 ohm speakers each and wired them both in series, they would both be playing at 16 ohms. If I were to then daisy chain them together at the speakon connectors, would they be playing at 8 ohm impedence or 16 ohm impedence?
I got 2 JL Audio 12w1v2-8 they're both 8 ohms each 300watts RMS old school Subwoofers. I bought them from a guy I used too know, they've been sitting in my closet collecting dust. This Winter I wanna have a custom ported box build for them, now I'm guessing after they both become 4 ohms wired in parallel, I would need an amp stable at 4 ohm.
I have an amplifier which is four channel per channel at 40hms 1300 watts want to connect two speakers per channel what would be the best what the RMS must I use on each speaker?
I have 14 8 ohm speakers to connect in a commercial location, what is the best way to wire the speakers and what amplifier should I use? thanks for your help ( I have two amplifier 4 Ohm by channel
If I have a 1,500 watts per channel integrated amplifier What speaker wattage (4pcs per channel) I will used for series parallel connection? Thank you.
I have a boss riot 1100 watt amp the amp is rated 1 to 4 ohms and I have two 12" JL audio 12w1v2-4 hooked up for 2 ohms and I want to add one more subwoofer same kind what is the best way to hook it up without hurting the amp.. I know the subwoofers are 600 watts each so if I hook up 3 off them that would make 1800 watts so would I need a 2000 watt amp?
Sir I have two subwoofer speakers which is 6ohms each, the amplifier is 4 to 8 ohms please advise me how should I connect the speakers parallel or series
hello, good day. i want to desing an audio for a pa system. the lenght is 600m and is an open space without roofing. the purpose of the speaker is for announcement and soft music for workers. what do i do?
Is it ok for two 8 ohms tweeter whithout crossover and wire it to series config and add bass blockers and connect it to 8 ohms instrumental speaker in parallel config what is the equal ohms of this combination. I have a stereo amp that supports 8 to 16 ohms is it good or bad for the speakers and amp?
still not enough info i got here, you see you just do it on 1 one side of an Amplifier or Mono what happens if I will have to fill in the other side to balance the audio ofcourse i will, and i will put another 4 speakers? so would that be fine? what is the computation then?
I want to know I have 6 speakers 8 ohms and watt is 8 watt each. I want to use it with PAM 8610 Circuit. Is it possible. and How much power supply needed for that circuit. When I use 4 speakers with this PAM and Power supply is 12 volt 2Amp. But when I use 2 speaker more than at the time of high volume it will make ups and downs the sound.
what about the output, do they doubled up or divided? for example i got a pair of 200 watts 4 ohms speakers, so they become 8 ohms in series, but do they total as 400 watts? and what about in parallel?
Hi, Please help me, I want to connect my two 15" instrumental speakers, 1 midrange and 1 tweeter, to my 3way crossover network. all rated 8ohms. Should I connect the 2 instrumental speakers in series or parallel? My amp is rated 8ohms. Thanks for your help.
I just bought 4 mid range speakers that are 8 ohm at 125 watts rms now what’s the best 4 channel amp to buy to to power these ? Would I mend to wire them a certain way also ?? If I wire them make them 4 ohm does that mean they’ll have to be powered at a lower wattage rms ?
hi, i have been trying to find an answer but no ones better than you. i want to build a speaker with 2 woofers and one tweeter.. who can i connect them? can you give me and example of their ideal rated powers and impedance if im gonna use a 2 * 50w amp?
Does it affect the watts...what happens if I have 2 8ohms(120 watts each) speakers connecting parallel. The amp is rate at 60 watts in 8ohms but also 4omhs too. What watts is put out in 4omhs.
Can it be connected a 16 Ohms tweeter (with the filter capacitor) to the 4 Ohms full range driver? What would be any difference in sound? Is it safe for both tweeter and the full range driver? What the method should follow? Kindly explain? Thank you.
if im hooking up two 8ohm speakers in parallel to become 4 ohm and i want to add a tweeter which is 4 ohm to the the left wire will the tweeters stay 4 ohm? also can i add the right side speakers to the same input pos and neg to have both side wires bridged.
I have one 10 inch kicker solo baric round old school single voice coil sub, but the sub is 8ohm. And I have a boss 2 channel 1200 watt amp and it's old school also. My uncle gave it to me and he had it wired as bridged to the amp and gave it to me. But I bought a new bigger box which is a Qbomb single 10 inch side ported box. Just never heard of a 8ohm svc subwoofer
i have 2 technics sb-a38 towers they are a 3 way, 4 driver tower. each tower has 1 tweeter 1 mid & two woofers. the woofers are 10 inches and 12 inches. the impedance & wattage are listed on a tag on the back right under the speaker wire connections. both say the same but they say 8ohms @130 watts. now i would like to run both towers to an amp. can someone instruct me on how to get the full effectiveness of each driver in each tower without any complications or distortion
If a 300 watt 8 ohm speaker/cabinet is parallel wired to a separate 300 watt 8 ohm speaker/cabinet (reducing the load to 4 ohms) then hooked up to a 600 watts per channel (@ 4 ohms) amp, how many watts (if run at full power/600 watts) would the amp deliver to 'each speaker' please? (This speaker load would be the same for the second amp channel also = 4 cabinets/2 cabinets per channel)
How are you today..? I would like to ask you something about the project i'm working on. I want to build a floorstanding speakers using : 1 pc 8 ohm soft dome tweeter 1 pc 8 ohm midrange speaker 2 pcs 8 ohm woofer 10 inch 3 ways crossover system For each speaker My question is how to wiring those two woofer that keep them have 8 ohm impedance ? Thank you for your answer and have a nice day...
So in the third example (series¶llel), it's ok to just connect the four speakers to one of the two +/- terminals (L&R; just using the R +&-) as opposed to the first example (parallel) where both the Left and Right positive and negatives are used?
HELP, please!!!!!! I have Pioneer VSX 932 with 7.1 System each 150W 6ohm ! and every channel I connect two of those speakers so in every channel there is double of 150w 6 ohm how is the best way to connect those speakers with each other !??? now when I test it shows me that it's only 2 ohms! and tow of them RL RR they are 3 ohms and the receiver have 6-ohm output how i should connect all of thes things without risk !?
What if we wire the speakers in parallel, but one of the speaker broke? Will it get from 4 to 8 ohms and damages the amp? (Same question goes for the in series connection)
Yes .... R should be between 4 and 8 (if its 4ohm add 4 ohms resistance inseries of equivalent wattage to match SPL & SENSITIVITY .... Make sure sensitivity remains same for both speakers )
@RD CREATIONS @RD CREATIONS I have bought ahuja tza 4000em amplifier ; how can connect six speakers with 4w,90DB,200Hz_1KHz,120/240v, 70/100v inputvoltage each, could you tell me the best connection to get good clear sound for masjid?
Hi sir, I bought Yamaha PX10 and 4 boxes of Yamaha C115V passive speakers..how can I hook 2 C115V in daisy chain for each channel? because it will result into 4 ohms when connected together in stereo mode..C11V each is 8 ohms. How to set yamaha PX10 into 4 ohms for each channel? thank you Sir!..I will appreciate it much for the solution..from Philippines here...
Sir, how can I connect my 400 watts 12" subwoofer 4,8 ohms to my home amplifier that is 550 watts per channel with 4 speaker terminal .each terminal is rated with 8 ohms.I'm afraid to do it with my self alone.before I make any move or desition I want to ask your best advice if I continue this or ill go find another amplifier that is rated with 4 ohms only..thank you very much sir, I know you are the right technician that can help me how to fix this problem...good day to you sir.....
In the combination, parallel/series wiring, are you wiring all 4 speakers into the left channel? I’m assuming then you could add 4 more speakers to the right channel with the same wiring? I know this is an old video, but maybe I’ll get a confirmation... thank you!
So with the series parallel you showed 8 olm for the set of 4. It’s going to one channel of the amp. Would the load change if you used more than one channel
sir i have 1 crown pr800 power amp, and i have 2 targa 12" 400w 8ohms speakers plus another 2 crown 8" 700w 8ohms speakers,what should i do to get the best sound for it ,what is the proper wiring of this speakers. is this match?
as i know.. the amplifier are more watts than the speaker ... example . you have a 450 watts speaker it means you choose a amplifier higher than your speaker watts.. exmple 500 watts amplifier..
You're totally right! However Ohms are important to match because they are the the resistants who prevent high current (power) to the speakers, and prevent from blowing the speaker/s and overheating your amp with high voltage flowing. From my research thats my understanding and it makes sense. Lmk if you figured out, or learned another way, I would like to know!
It started simple but quickly turned into a science class... My brain can't handle that much equation... Can I hook an 8 olm and a 6 olm speaker to one + - channel on a power amplifier?
I have 6 and 16ohms in my amplifier output I want to connect 6speakers per channel how many ohms and watts of speaker should I use and what connection should be applied. Thank you very much & God bless.
hi, can i connect a 4 ohms 600w rms woofer with a 8ohms 40 w rms woofer in parallel. In theory it will give me 6ohms , but what about the power? What will happen to it?..please help as i am building my first diy subwoofer
Darn pesky jumpers! Haha. Thank you so very much for sharing this, and the last video on 8 ohm (keyboard doesn't have the omega symbol 😔) vs 70v system. Just picked up a Realistic FM Mic PA system, beauty from I'm guessing 70s? Find out soon. Anyways it had those, I had no idea. I now know I know nothing about stereos, despite having been an audio enthusiast (okay, low budget audiophile), and wiring car stereos since I was 14...20 years ago,just as hobby. But, Man, thank you for opening my eyes. When I have time I need to watch everything you have. 🙏 😂 🎶 🔊
I run two 8 ohms subs in series.
They sound great i'm hearing sounds i never heard before wheni ran then at 8ohms. My amp
runs cooler and i'm not turning up the gains or volume to compensate. I love it... it hits hard and feels different, Give it a try.
The fact that i'm in bridge mode, may be the reason
the power seems to still be strong.
I wanted studio series amp/ speakers in my car , due to the fact that me & by brother produce music & test it on the go sometimes..this came in the clutch amigo! thank you
Great overview. Coming from an electronics background, it all comes down to impedance matching. The source (amp) must match the load (speakers) if you don't want to damage/overload/underload your system.
Thank you for the informative video. Do you have one on how to wire multiple speakers to a 3 way crossover to achieve the correct impedence?
Simple and easy to follow great work teach
Very nice turtorial. Can you teach me how to wire 8 x 8 ohm speakers on one channel (8 Left 8 Right) while maintaining 8 ohm? Or is this possible?
Is it possible ( and how if possible ) to wire two 8 ohm speakers in one speaker box so the hook up wires for both of them ( to the amp ) will be at 8 ohms ( not 4 or 16 ohms ) ??? This question is for a two speaker box ( each with two 8 ohm speakers ) system.
thank you !
If I were to build two speaker boxes containing two 18 inch 8 ohm speakers each and wired them both in series, they would both be playing at 16 ohms. If I were to then daisy chain them together at the speakon connectors, would they be playing at 8 ohm impedence or 16 ohm impedence?
👋 if I have two 4ohm + one 8ohm in one box connect to a 3000 watt 1 channel 2ohm amp how do I connect them.
How are the voltage drops watts distributed
This is good stuff. Looking at the third example, how would you do the combination with five 8-ohm speakers and a 16-ohm amplifier?
Can you run back all that squiggly numbery ohm figure outer thing once more.. how do you do that
I got 2 JL Audio 12w1v2-8 they're both 8 ohms each 300watts RMS old school Subwoofers. I bought them from a guy I used too know, they've been sitting in my closet collecting dust. This Winter I wanna have a custom ported box build for them, now I'm guessing after they both become 4 ohms wired in parallel, I would need an amp stable at 4 ohm.
I have an amplifier which is four channel per channel at 40hms 1300 watts want to connect two speakers per channel what would be the best what the RMS must I use on each speaker?
I have 2x Neo 10 8ohm. Should i wire them in series 16 ohm or paralell 4 ohm? my ICEpower1200A2 can handle both
I have 14 8 ohm speakers to connect in a commercial location, what is the best way to wire the speakers and what amplifier should I use? thanks for your help ( I have two amplifier 4 Ohm by channel
I have one amp 2 channel, running a set of components,(2 tweeters,2 woofers) but i want to connect 2 more tweeters on same system how to do it..
What is your capacity of amp and speakers ?
So if I took your combo series and parallel at 8 ohms and I wanted to add a woofer to it I would probably be best if i went with like a 16 ohm woofer?
If I have a 1,500 watts per channel integrated amplifier
What speaker wattage (4pcs per channel) I will used for series parallel connection? Thank you.
Hi great video.
Pls is it that the higher the ohms and power the better or more powerful d speaker or vice versa?
I have a boss riot 1100 watt amp the amp is rated 1 to 4 ohms and I have two 12" JL audio 12w1v2-4 hooked up for 2 ohms and I want to add one more subwoofer same kind what is the best way to hook it up without hurting the amp.. I know the subwoofers are 600 watts each so if I hook up 3 off them that would make 1800 watts so would I need a 2000 watt amp?
can you use 6 and 4 ohm together in series for a stereo system rated at 8 ohm max? It comes out to be 10 ohms.
Sir I have two subwoofer speakers which is 6ohms each, the amplifier is 4 to 8 ohms please advise me how should I connect the speakers parallel or series
very educational thank you
So
1/8 +1/8 + 1/8 +1/8 = 1/32
Running that parallel to another 1/32 will be 16ohms?
Can someone tell me what ohm that 8 8ohm speakers would come to
What amp would I need to run 4 8ohm speakers in my car? Two channel 4 ohm stable wired in parallel? Somebody please help!
Depends upon the capacity of speaker (watts)
So two 8 ohm 12 inch subwoofers should be wired in parallel to a 4 ohm monoblock amplifier?
hello, good day. i want to desing an audio for a pa system. the lenght is 600m and is an open space without roofing. the purpose of the speaker is for announcement and soft music for workers. what do i do?
Is it ok for two 8 ohms tweeter whithout crossover and wire it to series config and add bass blockers and connect it to 8 ohms instrumental speaker in parallel config what is the equal ohms of this combination. I have a stereo amp that supports 8 to 16 ohms is it good or bad for the speakers and amp?
still not enough info i got here, you see you just do it on 1 one side of an Amplifier or Mono what happens if I will have to fill in the other side to balance the audio ofcourse i will, and i will put another 4 speakers? so would that be fine? what is the computation then?
Well, but what can I do with different ohms and watts collected speakers to built à Powerful enclosure ?
Hi I have 4 speakers each 4 ohms how can i connect them to achieve 8 ohms load to my AVR?
I want to know I have 6 speakers 8 ohms and watt is 8 watt each. I want to use it with PAM 8610 Circuit. Is it possible. and How much power supply needed for that circuit. When I use 4 speakers with this PAM and Power supply is 12 volt 2Amp. But when I use 2 speaker more than at the time of high volume it will make ups and downs the sound.
what about the output, do they doubled up or divided? for example i got a pair of 200 watts 4 ohms speakers, so they become 8 ohms in series, but do they total as 400 watts? and what about in parallel?
Hi, Please help me, I want to connect my two 15" instrumental speakers, 1 midrange and 1 tweeter, to my 3way crossover network. all rated 8ohms. Should I connect the 2 instrumental speakers in series or parallel? My amp is rated 8ohms. Thanks for your help.
i have audiocontrol lc 6 1200 provide 125 watts RMS and focal 80 watts RMS 4-ohm impedance what voltages i should keep my amp gain please help
Thats nice, but how about wiring a 2 4ohm and 1 8ohm speakers, is it can be? Thanks you
I just bought 4 mid range speakers that are 8 ohm at 125 watts rms now what’s the best 4 channel amp to buy to to power these ? Would I mend to wire them a certain way also ?? If I wire them make them 4 ohm does that mean they’ll have to be powered at a lower wattage rms ?
Check out Parts Express. They always had helpful answers.
Can I run 3 Buttkicker Transducers (4 ohm each) in series with a Behringer NX3000W amp bridged 3000W into 40 ohms?
Dose the sound change with each example ?
hi, i have been trying to find an answer but no ones better than you. i want to build a speaker with 2 woofers and one tweeter.. who can i connect them? can you give me and example of their ideal rated powers and impedance if im gonna use a 2 * 50w amp?
If 8 om 2 speakers connect on parelor so In amplifier which point we connect 4/8 om
Hi can I work 8000w 1oms amp with 16 - 8oms speakers
Does it affect the watts...what happens if I have 2 8ohms(120 watts each) speakers connecting parallel. The amp is rate at 60 watts in 8ohms but also 4omhs too. What watts is put out in 4omhs.
Can it be connected a 16 Ohms tweeter (with the filter capacitor) to the 4 Ohms full range driver? What would be any difference in sound? Is it safe for both tweeter and the full range driver? What the method should follow? Kindly explain? Thank you.
My amplifier 2channel is 4-16 ohm but i have 5 3ohm speakers and 1 6ohm subwoofer .what should i do
if im hooking up two 8ohm speakers in parallel to become 4 ohm and i want to add a tweeter which is 4 ohm to the the left wire will the tweeters stay 4 ohm? also can i add the right side speakers to the same input pos and neg to have both side wires bridged.
I know this is late. But you have to use a crossover.😀
I have one 10 inch kicker solo baric round old school single voice coil sub, but the sub is 8ohm. And I have a boss 2 channel 1200 watt amp and it's old school also. My uncle gave it to me and he had it wired as bridged to the amp and gave it to me. But I bought a new bigger box which is a Qbomb single 10 inch side ported box. Just never heard of a 8ohm svc subwoofer
Informative, You save many amps by guiding correctly
Can we do a star/delta combinations ?
i have 2 technics sb-a38 towers they are a 3 way, 4 driver tower. each tower has 1 tweeter 1 mid & two woofers. the woofers are 10 inches and 12 inches. the impedance & wattage are listed on a tag on the back right under the speaker wire connections. both say the same but they say 8ohms @130 watts. now i would like to run both towers to an amp. can someone instruct me on how to get the full effectiveness of each driver in each tower without any complications or distortion
If a 300 watt 8 ohm speaker/cabinet is parallel wired to a separate 300 watt 8 ohm speaker/cabinet (reducing the load to 4 ohms) then hooked up to a 600 watts per channel (@ 4 ohms) amp, how many watts (if run at full power/600 watts) would the amp deliver to 'each speaker' please? (This speaker load would be the same for the second amp channel also = 4 cabinets/2 cabinets per channel)
could you comment how connect tweeter with capacitor.... what type of capacitors and different values that match with different speaker impedance
Can I wire 8 8ohm meds to 1ohm amp?
Sir what if 4 speakers the one is 4 ohms the other three speakers is 8 ohms each how much is the ohms if it's connected parallel .thanx
How are you today..?
I would like to ask you something about the project i'm working on.
I want to build a floorstanding speakers using :
1 pc 8 ohm soft dome tweeter
1 pc 8 ohm midrange speaker
2 pcs 8 ohm woofer 10 inch
3 ways crossover system
For each speaker
My question is how to wiring those two woofer that keep them have 8 ohm impedance ?
Thank you for your answer and have a nice day...
please help me,I have three speakers (8ohms) and I want to connect to the amp in one outlet,how can I wire that three speakers?
So in the third example (series¶llel), it's ok to just connect the four speakers to one of the two +/- terminals (L&R; just using the R +&-) as opposed to the first example (parallel) where both the Left and Right positive and negatives are used?
I have 6 speaker how i connect properly in both series and parallel with 2ohm tell me sir
How many 8 ohms 30 w speaker can connect 4ohms 2*250w amplifier
Can a 2ohms amplifier play 8 speaker 8ohms?
Lower the resistance the better right? Means more power. So a total resistance of less than 4ohm will be ideal. Please correct me if im wrong thanks.
how about the polarity?
Can I connect 8, 8ohm tweeters to get a 8 ohm or 4 ohm load can someone let me know please thanks.
Hi can I connect 8 6” 260watts speakers to a 2 ohms one channel 3000watts amp plz show me how ?
I am going to replacing 2.5ohms speaker to 2.7ohms speakers what will happen.
Is there bigger problem?
HELP, please!!!!!! I have Pioneer VSX 932 with 7.1 System each 150W 6ohm ! and every channel I connect two of those speakers so in every channel there is double of 150w 6 ohm how is the best way to connect those speakers with each other !??? now when I test it shows me that it's only 2 ohms! and tow of them RL RR they are 3 ohms and the receiver have 6-ohm output how i should connect all of thes things without risk !?
What if we wire the speakers in parallel, but one of the speaker broke? Will it get from 4 to 8 ohms and damages the amp?
(Same question goes for the in series connection)
Sure
If ur number of speakers reduces , you have to increase the ohms
I can wire subs up but my biggest thing is 8 ohms better or 2 ohms what's more power
Can I connect two speakers in series or parallel having different wattages ?
Yes .... R should be between 4 and 8 (if its 4ohm add 4 ohms resistance inseries of equivalent wattage to match SPL & SENSITIVITY .... Make sure sensitivity remains same for both speakers )
Forgot to say ... You must not ....overplay than the least powered speaker ....
@RD CREATIONS @RD CREATIONS I have bought ahuja tza 4000em amplifier ; how can connect six speakers with 4w,90DB,200Hz_1KHz,120/240v, 70/100v inputvoltage each, could you tell me the best connection to get good clear sound for masjid?
Hi sir, I bought Yamaha PX10 and 4 boxes of Yamaha C115V passive speakers..how can I hook 2 C115V in daisy chain for each channel? because it will result into 4 ohms when connected together in stereo mode..C11V each is 8 ohms. How to set yamaha PX10 into 4 ohms for each channel? thank you Sir!..I will appreciate it much for the solution..from Philippines here...
Sir, how can I connect my 400 watts 12" subwoofer 4,8 ohms to my home amplifier that is 550 watts per channel with 4 speaker terminal .each terminal is rated with 8 ohms.I'm afraid to do it with my self alone.before I make any move or desition I want to ask your best advice if I continue this or ill go find another amplifier that is rated with 4 ohms only..thank you very much sir, I know you are the right technician that can help me how to fix this problem...good day to you sir.....
How can I wire 8speaker 8oms to 2 oms
finaly solv my calclutaion ...tnk u sir
I have jbl 8 ohm 6no speaker & jbl libra250 amp . Please guide me wiring diagram .
how about 3 & 5 8ohms & 6ohms woofer wiring
This is an excellent explanation and detailed enough for even for your average home AV guy/gal. Thanks!
Can i use a 3 ohms speaker to a 4 ohms amp?
Don't think so, lol I'm no expert though.
In the combination, parallel/series wiring, are you wiring all 4 speakers into the left channel? I’m assuming then you could add 4 more speakers to the right channel with the same wiring? I know this is an old video, but maybe I’ll get a confirmation... thank you!
After watching this video, I tried it out and the answer is YES. 4 speakers to the left channel and 4 speakers to the right.
I need help
So with the series parallel you showed 8 olm for the set of 4. It’s going to one channel of the amp. Would the load change if you used more than one channel
This very good technic
How to calculate 3 + 3 speakers 8watt 8ohm each. I want to make it 8ohm in each channel
holly crap i didn't expect that building a speaker box would be this complicated...
easy
Lol me to. My mind and maybe my amp is blown 😆
what about three 8 ohm speakers in parallel?
Brilliant
Will wiring speakers in parallel make the sound mono not stereo?
How to connect two speakers and one twitter of 8 ohm's in 4 ohm's power in one cabinet box
sir i have 1 crown pr800 power amp, and i have 2 targa 12" 400w 8ohms speakers plus another 2 crown 8" 700w 8ohms speakers,what should i do to get the best sound for it ,what is the proper wiring of this speakers. is this match?
as i know.. the amplifier are more watts than the speaker ... example . you have a 450 watts speaker it means you choose a amplifier higher than your speaker watts.. exmple 500 watts amplifier..
You're totally right! However Ohms are important to match because they are the the resistants who prevent high current (power) to the speakers, and prevent from blowing the speaker/s and overheating your amp with high voltage flowing. From my research thats my understanding and it makes sense. Lmk if you figured out, or learned another way, I would like to know!
How i connect 2 8 ohms speakers to one channel 2 ohms amp
My problem this cnustun not shrees and on pralal
thank you...
How to interface with fire alarm sir Nind video thank you
It started simple but quickly turned into a science class... My brain can't handle that much equation...
Can I hook an 8 olm and a 6 olm speaker to one + - channel on a power amplifier?
this is a bit confusing, we still need to add watts calculation of the amp and the watts of the speakers!
I have 6 and 16ohms in my amplifier output I want to connect 6speakers per channel how many ohms and watts of speaker should I use and what connection should be applied. Thank you very much & God bless.
hi, can i connect a 4 ohms 600w rms woofer with a 8ohms 40 w rms woofer in parallel. In theory it will give me 6ohms , but what about the power? What will happen to it?..please help as i am building my first diy subwoofer
Ok
Darn pesky jumpers! Haha. Thank you so very much for sharing this, and the last video on 8 ohm (keyboard doesn't have the omega symbol 😔) vs 70v system. Just picked up a Realistic FM Mic PA system, beauty from I'm guessing 70s? Find out soon. Anyways it had those, I had no idea. I now know I know nothing about stereos, despite having been an audio enthusiast (okay, low budget audiophile), and wiring car stereos since I was 14...20 years ago,just as hobby. But, Man, thank you for opening my eyes. When I have time I need to watch everything you have. 🙏 😂 🎶 🔊