I think the Rubber Duck would be a perfect candidate to do some "back to basics" type episodes. The engine apparently still leaks and you have no clue what the cam specs are, and also not sure if indicated TDC is true. One episode could be just about details of putting an engine together that us "old timers" take for granted, but newbies to the hobby may not know. Then another episode on degreeing a cam. Difficult to get full cam card specs that way, but you'll know a whole lot more than you did. Verifying TDC is part of degreeing the cam, so there! Great episode!
You'd be a good candidate for back to basics. One change at a time. You have the information.ask freiburger for help, don't think. You know bettet.❤❤❤❤are ❤there power val❤vessel or blocked? You got the world by the balls, but keep your hands in your pockets
I was thinking 'sort of' along the same avenue. I'm surprised our buddy Mike didn't tear the motor down and investigate so he's KNOW what's in der. [edit] @10:49,, "Hopefully this is accurate." Case in point. This isn't the Mike Finnigan we're come to enjoy,, he usually KNOWS if it's accurate or not.
Mike needs to go back to the basic because he's soo over his head that's why Mike has someone always holding his hand like a little school boy, take his 1955 chevy for example, nothing but problems after problems just like this episode more if the same old bullshit with Mike, sad indeed !!!!
This was one of your best videos. The editors got the pacing right, and told a continuous story while including just the right amount of details during the slower moments. Keep it up!
That firebird is definitely a keeper. Noticed a lot of axle tramp as she was burning out , dialling that out should help her hook n book bro. Good luck with your projects in the future Big love from Wales U.K
I really like the fact Finn takes the time/effort to look through the comments and repleys. Its one of the great things that separates him from others. ❤
Rubber Ducky in my opinion is the most important car in your fleet. I love Blasphemi but I love Rubber Ducky's story and history. It holds a special place in my heart for sure. Love your channel keep it up. Best of luck. Take Care!!!
Glad to hear you are healing and taking it slow. Better to be a bit cautious now rather than rush it and have a longer recovery! stay healthy and thank you for sharing.
Looks good, I am glad to see this out and making it. Personally being a turbo LS, data, and EFI lover have grown to find that everthing different is cool. It isn't always about the end goal it is about the journey. I am glad to see it out, and hope to see it being out used and put up against the Crusher Camaro again!
Nice to see you and newbern in a video and see some progress on rubber duck. I noticed during the video that you got a newer Ford FX4 diesel and at the end it was pulling the trailer a nice white one. Nice truck.
HI NICE TO SEE YOU ARE OUT WITH RUBBER DUCK . YOU WILL GET IT RIGHT !! AND 8 SECONDS HERE WE COME !! YOU HAD FUN TO! WILL BE WAIT FOR THE NEXT SHOW !! TODD IN MICHIGAN .
No doubt you'll get the Duck dialed in, and with a 9.04 previous et a 8 should be obtainable. The biggest change I saw was setting the timing. I'm sure you would agree that was the biggest performance change that was made. I have to belive that pointer is off. It's great to see you healing well and off the crutches friend.
One of my favourite cars that you have and it’s got an incredible back story! Love that you took that last owners wife down the drag strip one last time 🤙🏻
The Rubber Duck is an awesome car, and it’s pretty cool to see guys like you testing at a track in small town Alabama. Being from the town of Steele myself makes it even better to see these videos.
Thanks Mike for this video, I was needing a drag racing test and tune video to remind me of my bracket racing days of getting the car dialed in a ready to race. I'm a retired bracket racer and I needed this. I like your way of figuring it out and thinking and I always would forget half of what I needed and would have to improvise, that's racing.
For highlighting the marks on the harmonic balancer - slide some white chalk over the marks and then wipe it off. Alternatively, smear a white paint pen over it and quickly wipe the fresh paint off the high spots. It'll pool in the markings.
Before the chassis dyno, pull the pan front cover and heads. Using what you have at the shop, measure the bore and stroke, the cam specs, lap the valves, treat it to new bearings, pick the kids up from school, put it all back together in time for dinner.Waiting till you blow it up, a replacement is about 10% the cost of your new tow rig.
Dude I am honestly happy God has blessed you with this car. Because it's my dream car and the blue 67 short bed truck you guys were in are my dream vehicles. I thought I would be able to get them because I had a great job but I was disabled 20 years ago because of a flu shot I'm 55 now and unless God blesses me I'm not going to ever be able to afford my dream vehicles. I'm praying your safe and you get your 8 seconds. But if I am blessed with them they are going to be daily driver's no way I'm going to race them I might goose them. But no way I will race them I'm going to enjoy them every day.
You might check the air scoop hold down as the square shape of the bar may cause air flow problems. There was an engine masters program on this in the past.
Always love to see videos featuring the Rubber Duck. Thanks to Finnegan & crew for making this video happen despite the leg. Also, what's it going to take to get Boshears back on the channel?
I am a Ga boy too!! Love seeing you on the roads hauling something!! I do love over though in case something falls off!!! Still love seeing ya though!! Don’t worry people move over from behind me too!!!
I think Van Gilder built the engine. I had him build mine and almost exact same experience. Keep up the great content. Hope I see ya at a show this year.
I gotta admit.... that Poncho will downright SCOOT!! I remember when most racers were pretty satisfied breaking into the high 12's in their street car. These days racers are breaking into the 9's like it ain't nothing!
Gotta be losing time having to steer it left. Adjust the suspense so it goes straight might help. Loved the video Mike keep up the good work and I hope your leg gets better soon.
This car has really came a long way, it looks great Mike! Please keep this car and don't sell it. It's plenty fast and hasn't been chopped up a lot in the pursuit of more speed, have it be the 'old school' version of the go fast fleet. For the breakup issue at 6K, maybe it could be the ignition setup breaking down, spark blowing out, or valve springs? What are the plans for the Corvette?
I really think you should keep her Mike, rubber duck is the favourite car for me and many others of all the cars in your fleet. Proper old school huge tire / carb drag car and she looks stunning.
Here’s my keys, go get what you need. Damn that’s a whole lot of Southern Charm and trust that I’m sure you wouldn’t see in most places. Good on Avid Speed, True gentlemen there.
I can't believe he hasn't pulled the engine out and get it blueprinted so you HAVE the specs. And then put it back together and do your tuning from there.
I have a 67 firebird with a 400 and a 4 speed I have had this car for 20 years and I love it you have a awesome car my friend nice video keep up the great work
Rubber Duck 🦆 is one of my absolute favorite cars that you own, next to Blasphemi. Love the old school vibe. Also Joe needs to grow the beard out again.
I'm with Joe, can't get rid of this car! The back story alone is enough to keep it forever!❤ I think a Pro-charged aluminum 632 and a tube front end would be pretty amazing. Or keep the blower cuz they're amazingly cool! Can't wait to see the future for the Rubber Duck! Along with getting Blasphemi right...😂
Looking forward to seeing the saga of the Rubber Duck Carrie on. You would think with a blown 540 it would run 8s no problem. I can’t wait to see the next installment.
My older brother had a 68 firebird that was also yellow and as a kid in the early 90’s that car was both fun and scary as sh*t (I was probably 12 years old). It had a Pontiac 400 in it and it could run in the 12’s which at the time it was considered a pretty damn fast car. This was well before the cheap LS plus turbo=fast and e85 we have now. I was so sad when he sold it to pay for his wedding and unfortunately at the time I was probably 16 and he had a lot of money in the car so I had no shot on buying it (plus my mom would have said hell no even if I had the cash). That was the car that got me into old cars and Finnegan, every episode you post brings back some good memories into the days where you could pickup a clean 67-69 firebird with zero rust (I live in California, the land of no rust but you pay for it) for under $4k. First gen camero’s were not very really cheap even in the mid 90’s. Thanks for the video.
I’m noticing a lot of wheel hop when it’s doing a burnout, but I’d be checking valve lash or valve spring pressure. It’s a cool car glad you saved it, but it deserves some attention that’s for sure. It might do better or like more timing too, since it’s running out of breath at higher rpm and breaking up.
. My favorite car a yellow 1967 firebird. Although i like mine with slot mag wheels, 15X12 and P295/50 on rear with coil overs and track link bars and watt's link. And truck arm bars fastened to the Xbars under the front seats. No leaf springs here. And no nose dive. Buick 350 engine with Aluminum heads from TA performance and improved and worked by David Vizard methods. A Pro Systems SV1 carburetor 850 cfm. A GM aluminum A833 manual 4 speed with overdrive with a modified hardened and reinforced case. 3.90 rear gears in a FOX 8.8 aluminum hardened and reinforced rear end. A single piece fiberglass tilt front end reinforced with carbon and kevlar with S glass materials and some aluminum and chromoly sheet monocoque lay up structuring as well. This car is much lighter just by these lightweight combination and is meant for daily driving and pizza delivery being fully sent. Epoxy used in construction is loaded with blend of 10% silica. Front suspension is coil over with custom A arms and rack and pinion manual steering. With a mile of engine set back. Wheels are aluminum slot mags. Fuel cell is a mega gallon fuel cell that is custom built and integrated into car. Car seats 5 people if you are my size 5'6.75". Well the front engine cradle is a shear away in a really tragic heavy accident the front end can shear away and dissipate energy. Indestructible foot box and passenger area with full crumple zones surround. This 'car' is safe, fun, mpg efficient, and road worthy. 🙂
Rubber duck needs the deck lid spoiler Finn ! Might not give you down force , but boy does it look good ! Unless don't want to drill wholes in the deck ! Lol definitely need to put on the dino for sure , love the car ! Peace and Love !
Love the car. You and David were like 20 miles from my house when you raced the Crusher. Wished I could have been out there watching, but Covid screwed everything up at that time.
Well Rubber Ducky also has the honor of being the only car video my mom watched all the way through and had fun watching - that was an epic car nut Christmas episode. 😊 Mom ever since has wanted me to get or build a car like Rubber Ducky just for Christmas tree shopping. So yes, keeping toying away with this one - don't ever "finish" Rubber Ducky fully. 😁
I think the Rubber Duck would be a perfect candidate to do some "back to basics" type episodes. The engine apparently still leaks and you have no clue what the cam specs are, and also not sure if indicated TDC is true. One episode could be just about details of putting an engine together that us "old timers" take for granted, but newbies to the hobby may not know. Then another episode on degreeing a cam. Difficult to get full cam card specs that way, but you'll know a whole lot more than you did. Verifying TDC is part of degreeing the cam, so there! Great episode!
You'd be a good candidate for back to basics. One change at a time. You have the information.ask freiburger for help, don't think. You know bettet.❤❤❤❤are ❤there power val❤vessel or blocked? You got the world by the balls, but keep your hands in your pockets
This is a great idea for an Episode.
I was thinking 'sort of' along the same avenue. I'm surprised our buddy Mike didn't tear the motor down and investigate so he's KNOW what's in der. [edit] @10:49,, "Hopefully this is accurate." Case in point. This isn't the Mike Finnigan we're come to enjoy,, he usually KNOWS if it's accurate or not.
Mike needs to go back to the basic because he's soo over his head that's why Mike has someone always holding his hand like a little school boy, take his 1955 chevy for example, nothing but problems after problems just like this episode more if the same old bullshit with Mike, sad indeed !!!!
@@Motorcitypower1 please point us to your RUclips channel where you wrench on cars, wire and weld.
We would all love to see it.
This was one of your best videos. The editors got the pacing right, and told a continuous story while including just the right amount of details during the slower moments. Keep it up!
Nice to see you and 12 volt Dave in a video again! It would be nice to see you guys collaborate more often
Love the Rubber Duck. The front end on those Firebirds is just perfect.
Except for the 69.
That firebird is definitely a keeper. Noticed a lot of axle tramp as she was burning out , dialling that out should help her hook n book bro.
Good luck with your projects in the future
Big love from Wales U.K
I really like the fact Finn takes the time/effort to look through the comments and repleys. Its one of the great things that separates him from others. ❤
Bingo.
Rubber Duck deserves a well built engine with know parts. Love that blower surge!
Rubber Ducky in my opinion is the most important car in your fleet. I love Blasphemi but I love Rubber Ducky's story and history. It holds a special place in my heart for sure. Love your channel keep it up. Best of luck.
Take Care!!!
Do Ya Think Rubber Duck Could Handle Some Hits Of Nitrous??🤔🫣
Glad to hear you are healing and taking it slow. Better to be a bit cautious now rather than rush it and have a longer recovery! stay healthy and thank you for sharing.
"They run better with eight" quote of the day, bud. Love the test & tune episodes.
Check valve spring pressure, might be floating the valves up top….maybe. Love the content Sir!!!
very good point
Came here to say the same thing
Great point but I'm thinking the camshaft doesn't have enough to Rev that high either.
Love the firebird. My dad had a 67 formula 400.
Rubber Duck is my fav of all Finn’s cars
Mine as well.
Same here
Blasphemi by a mile for me. And Im a MOPAR guy! But both of Mikes Chargers are P's Of S. 🤣
What happened to that '69 Firebird he got a few years back? It might have been on an episode of Roadkill.
I LOVE THIS CAR!!! I consider this a REAL old school street/strip car (OG front end, pump gas, huge motor). WAY cool.
A man after my own heart first gen firebirds are my favorite GM cars ever made. Absolutely love the rubber ducky.🐤
What a beauty! Keep her and make her into what you want. You have the know how, the technology and the will to go there....sooo GO THERE!
GG Blake from Avid Speed!
Big props to the dudes at Abbot Speed. Reminds me of the shops in eastern North Carolina back in the 80s.
20:47
Avid Speed
Looks good, I am glad to see this out and making it. Personally being a turbo LS, data, and EFI lover have grown to find that everthing different is cool. It isn't always about the end goal it is about the journey. I am glad to see it out, and hope to see it being out used and put up against the Crusher Camaro again!
Glad to see Newbern is back on a video!! :)
Newbern Turk is back!!!!! Lol
Newbern has a channel and it way more gooder ish.
Looks like a new Ford pulling that trailer
Newbern is doing Faster show too
Love the Firebird , keep going with it ! Thanks for the video.
I know it might be blasphemy (lol) to say this but rubber ducky is by far my favorite vehicle you own.
Nice to see you and newbern in a video and see some progress on rubber duck. I noticed during the video that you got a newer Ford FX4 diesel and at the end it was pulling the trailer a nice white one. Nice truck.
HI NICE TO SEE YOU ARE OUT WITH RUBBER DUCK . YOU WILL GET IT RIGHT !! AND 8 SECONDS HERE WE COME !! YOU HAD FUN TO! WILL BE WAIT FOR THE NEXT SHOW !! TODD IN MICHIGAN .
That's awesome they handed y'all the key and let y'all get the parts
No doubt you'll get the Duck dialed in, and with a 9.04 previous et a 8 should be obtainable. The biggest change I saw was setting the timing. I'm sure you would agree that was the biggest performance change that was made. I have to belive that pointer is off. It's great to see you healing well and off the crutches friend.
I wanna see this engine disassembled and inspected before its on the dyno. There is a lot more content here and I'm ready for it!
Love the Rubber Duck! I could listen to that chop all day!❤
I love that you keep doing things with this car I know members of the family you bought it from still enjoy going to the dragstrip he built.
I love old school stuff, this might be my favourite car of yours!!
Do not rush to stop using the crutches! Trust your pain.
Very true it will cause more arthritis in the long run
Love the Rubber Duck! I can't wait to see your next vision for it ! Take care Mike .
Malibu wagon is a thing of beauty in my eyes! I have wanted to build one just like it ( same color) since I was in high school 30 years ago
One of my favourite cars that you have and it’s got an incredible back story! Love that you took that last owners wife down the drag strip one last time 🤙🏻
The Rubber Duck is an awesome car, and it’s pretty cool to see guys like you testing at a track in small town Alabama. Being from the town of Steele myself makes it even better to see these videos.
Love the car definitely would love to see more.
I can’t believe you came to little bitty Steele Alabama! This place has provided So much happiness and excitement! Please believe I love Dixie.
This is just of many lovely things about the South. People are generally friendly and will help you any way they can.
Thanks Mike for this video, I was needing a drag racing test and tune video to remind me of my bracket racing days of getting the car dialed in a ready to race. I'm a retired bracket racer and I needed this. I like your way of figuring it out and thinking and I always would forget half of what I needed and would have to improvise, that's racing.
For highlighting the marks on the harmonic balancer - slide some white chalk over the marks and then wipe it off. Alternatively, smear a white paint pen over it and quickly wipe the fresh paint off the high spots. It'll pool in the markings.
Before the chassis dyno, pull the pan front cover and heads. Using what you have at the shop, measure the bore and stroke, the cam specs, lap the valves, treat it to new bearings, pick the kids up from school, put it all back together in time for dinner.Waiting till you blow it up, a replacement is about 10% the cost of your new tow rig.
I Love th'Duck! More upgrades, Go Faster! My Favorite!
Dude I am honestly happy God has blessed you with this car. Because it's my dream car and the blue 67 short bed truck you guys were in are my dream vehicles. I thought I would be able to get them because I had a great job but I was disabled 20 years ago because of a flu shot I'm 55 now and unless God blesses me I'm not going to ever be able to afford my dream vehicles. I'm praying your safe and you get your 8 seconds. But if I am blessed with them they are going to be daily driver's no way I'm going to race them I might goose them. But no way I will race them I'm going to enjoy them every day.
That was a good looking G wagon! More on that please
You might check the air scoop hold down as the square shape of the bar may cause air flow problems. There was an engine masters program on this in the past.
Always love to see videos featuring the Rubber Duck. Thanks to Finnegan & crew for making this video happen despite the leg. Also, what's it going to take to get Boshears back on the channel?
Thankz Finn & Co.... 👍👍
I am a Ga boy too!! Love seeing you on the roads hauling something!! I do love over though in case something falls off!!! Still love seeing ya though!! Don’t worry people move over from behind me too!!!
Greattt to see your mobile mike awsome still take it easy brother. Bless you man
The comment section is pretty brutal this episode Mike. Don't let it bother you, us ollder G's are riding with you every vid!
Absolutely, half of them can't write a comment that's even close to being comprehendable, it's embarrassing.
I have a soft spot for 1st gen Firebirds, so this video was a real treat! 👍
I think Van Gilder built the engine. I had him build mine and almost exact same experience. Keep up the great content. Hope I see ya at a show this year.
I gotta admit.... that Poncho will downright SCOOT!! I remember when most racers were pretty satisfied breaking into the high 12's in their street car. These days racers are breaking into the 9's like it ain't nothing!
Remember track prep has improved too.
Gotta be losing time having to steer it left. Adjust the suspense so it goes straight might help. Loved the video Mike keep up the good work and I hope your leg gets better soon.
This car has really came a long way, it looks great Mike! Please keep this car and don't sell it. It's plenty fast and hasn't been chopped up a lot in the pursuit of more speed, have it be the 'old school' version of the go fast fleet.
For the breakup issue at 6K, maybe it could be the ignition setup breaking down, spark blowing out, or valve springs?
What are the plans for the Corvette?
I really think you should keep her Mike, rubber duck is the favourite car for me and many others of all the cars in your fleet. Proper old school huge tire / carb drag car and she looks stunning.
Love the “999” on the valve cover because that was the troop I got my Eagle Scout in!
Avid speed showing up big time and keeping the show on the road! Props to those badass hot rodders.
That Van Gilder sticker on the valve cover tells anyone local everything they need to know about that engine. Surprised it has lasted this long!
Props to the Boys at Avid Speed.. 🍻🍻
Good stuff, Gentlemen..
Avid Speed
@@the318pop Well,That was embarrassing..lol.. Thanks for the correction..🍻
Here’s my keys, go get what you need. Damn that’s a whole lot of Southern Charm and trust that I’m sure you wouldn’t see in most places. Good on Avid Speed, True gentlemen there.
Wonderful firebird with a great story. Your video is very intresting and well done. Thanks for sharing.
Cheers from France
I can't believe he hasn't pulled the engine out and get it blueprinted so you HAVE the specs. And then put it back together and do your tuning from there.
Got to keep the Duck!!! There is a ton that could be done!! But I like simple!!!!
Cool firebird and a great story. It’s a keeper for sure
I have a 67 firebird with a 400 and a 4 speed I have had this car for 20 years and I love it you have a awesome car my friend nice video keep up the great work
Rubber Duck 🦆 is one of my absolute favorite cars that you own, next to Blasphemi. Love the old school vibe. Also Joe needs to grow the beard out again.
It didn't break! That's a win right there in my book. Nice ride and glad you are going to keep working on it.
I'm with Joe, can't get rid of this car! The back story alone is enough to keep it forever!❤ I think a Pro-charged aluminum 632 and a tube front end would be pretty amazing. Or keep the blower cuz they're amazingly cool! Can't wait to see the future for the Rubber Duck! Along with getting Blasphemi right...😂
I love the Rubber Duck. That and the Crusher Camaro. And your other rides, too, but I really like the 67 Firebirds and Camaros.
I love the rubber duck! the new tow rig looks nice s well!
Love the Rubber Duck 👍 can't wait to get going on my 67 400 convertible firebird.
Love when Finn says newburn and I...... We all know who was turning the wrenches. 😂
Nice to see ya again...
Cool car! I’ve been watching since you pulled it out of its sleep at the old drag strip. You’ve definitely improved it.
Looking forward to seeing the saga of the Rubber Duck Carrie on. You would think with a blown 540 it would run 8s no problem. I can’t wait to see the next installment.
Beautiful testament Joe!
One of the best things about fuel injection. Being able to data log and troubleshoot issues quicker.
It looks really good. Thats worth a half a second!
Would be cool to see a full rebuild of that motor
Lots going on with the RD, need to take the small steps to dial it in.
Much respect for keeping it mostly old school, very cool.
Cheers from Tokyo!
Love the content brother car is 1 bad unit
I have been told NOT to use any timing light with an MSD except the old single strobe timing light
My older brother had a 68 firebird that was also yellow and as a kid in the early 90’s that car was both fun and scary as sh*t (I was probably 12 years old). It had a Pontiac 400 in it and it could run in the 12’s which at the time it was considered a pretty damn fast car. This was well before the cheap LS plus turbo=fast and e85 we have now. I was so sad when he sold it to pay for his wedding and unfortunately at the time I was probably 16 and he had a lot of money in the car so I had no shot on buying it (plus my mom would have said hell no even if I had the cash). That was the car that got me into old cars and Finnegan, every episode you post brings back some good memories into the days where you could pickup a clean 67-69 firebird with zero rust (I live in California, the land of no rust but you pay for it) for under $4k. First gen camero’s were not very really cheap even in the mid 90’s. Thanks for the video.
I’m noticing a lot of wheel hop when it’s doing a burnout, but I’d be checking valve lash or valve spring pressure. It’s a cool car glad you saved it, but it deserves some attention that’s for sure. It might do better or like more timing too, since it’s running out of breath at higher rpm and breaking up.
HEY FIN...I SEE YOU FINALLY MADE A CHOICE ON THE TOW PIG! GOOD CHOICE GOIN WITH THE FORD!!!!!
It's a rental.
Firing up on 7 was a great moment to yell "we're losing the shop!" and cut to a commercial.
. My favorite car a yellow 1967 firebird. Although i like mine with slot mag wheels, 15X12 and P295/50 on rear with coil overs and track link bars and watt's link. And truck arm bars fastened to the Xbars under the front seats. No leaf springs here. And no nose dive. Buick 350 engine with Aluminum heads from TA performance and improved and worked by David Vizard methods. A Pro Systems SV1 carburetor 850 cfm. A GM aluminum A833 manual 4 speed with overdrive with a modified hardened and reinforced case. 3.90 rear gears in a FOX 8.8 aluminum hardened and reinforced rear end. A single piece fiberglass tilt front end reinforced with carbon and kevlar with S glass materials and some aluminum and chromoly sheet monocoque lay up structuring as well. This car is much lighter just by these lightweight combination and is meant for daily driving and pizza delivery being fully sent. Epoxy used in construction is loaded with blend of 10% silica. Front suspension is coil over with custom A arms and rack and pinion manual steering. With a mile of engine set back. Wheels are aluminum slot mags. Fuel cell is a mega gallon fuel cell that is custom built and integrated into car. Car seats 5 people if you are my size 5'6.75". Well the front engine cradle is a shear away in a really tragic heavy accident the front end can shear away and dissipate energy. Indestructible foot box and passenger area with full crumple zones surround. This 'car' is safe, fun, mpg efficient, and road worthy. 🙂
Thanks Finn . I hope I get to ( as well as everbody else) race yall someday!
Thanks!
thank u!
The added boost pressure and fuel could be causing the valves to float at high RPM
Springs valve floating? Love old firebird, My 2nd car in hs was 73 Formula 400 firebird with stock tach in the hood. Like to have that back now
Love the Duck and youre probably right about the coil. Im also betting it could benefit from a custom ground SC cam and springs.
Rubber duck needs the deck lid spoiler Finn ! Might not give you down force , but boy does it look good ! Unless don't want to drill wholes in the deck ! Lol definitely need to put on the dino for sure , love the car ! Peace and Love !
This is what I've always hoped the channel would be like!!
Love the car. You and David were like 20 miles from my house when you raced the Crusher. Wished I could have been out there watching, but Covid screwed everything up at that time.
I don't care what it runs. It's my favorite car out of all your rides and a lot of others.
I love the Rubber Duck! You should do it all! At least low 6 seconds
Finally back at the track Finny. Excellent!
That trailer is already proven!. Nice!
American estates/station wagons are so much and I love them for that.
Well Rubber Ducky also has the honor of being the only car video my mom watched all the way through and had fun watching - that was an epic car nut Christmas episode. 😊 Mom ever since has wanted me to get or build a car like Rubber Ducky just for Christmas tree shopping. So yes, keeping toying away with this one - don't ever "finish" Rubber Ducky fully. 😁
@ClickOnProfile73517 buzz off bot! 🙄