Terbaik bang Bole tunjuk sikit tak mcm mna masukkan cable tu kt celah cermin😅 Banyak kali tgk video abam Terpikir mcm mna selit cable kt celah cermin Tapi mmg terbaik bang👍🏻
Yeppirs, the missing part is where the loop is pushed out -- actually, could be anywhere ...BUT... unit is installed where the rear view mirror was. hmmm, so if the loop ends up at the top, then it is pushed through at the bottom center of the windshield, pulled ALL the way around the perimeter, and --voila-- wind each side a bit at a time and done. (btw,what you don't see is the 170° heatgun following ahead of the cable to soften the bonding agent a bit 😉)
Safelite used this tool to remove the windshield from my 2011 Hyundai Sonata SE 2.0T about a month ago. So much easier than doing it the old fashioned way.
Se inserta con una espada que engancha el cable de dentro para afuera por la parte del salpicadero hacia afuera luego rodead el cristal con la cuerda por fuera
No more scratching to the bone. I assume the surface should be flat enough to re-glue the windshield. If not, I've scraped gasket off aluminum surfaces and know that with everything clear, the gasket can be removed gently without scratches. I really like that tool. Nice job and great video, thanks.
They’res a aftermarket windshield guy across town 79.99-99.99 installed for most cars. It’s a little bit cheaper quality but works , but better than 400.00 at the dealer.
Aquí en México es mas rápido y barato, con solo un hilo de acero y dos personas uno a fuera y otro adentro van cortando el sello y ya con las ventosas quitan el parabrisas. Lo mismo pero mas económico.
Wah ini baru canggih alatnya,soalnya nyopot kaca dgn silent original nya sangat susah dan bisa tapi lama dgn metode manual 👍yg saya pikir bagaimana cara kabel tis nya itu?mohon petunjuknya maseee 🙏🙏🙏
keknya itu tali yang di mesin di copot dulu itu kan kiri kanan tali nyambung cuman 1 tali , jadi itu copot trs di selipin kiri kanan kaca ntar di masukin kek mesin ya dah deh tinggal bor ,logika gw gitu sih
![BETA SQUAD vs AMP FOOTBALL MATCH [OFFICIAL STREAM]](http://i.ytimg.com/vi/ChEmvP52p0U/mqdefault.jpg)
![Roddy Ricch - Survivors Remorse [Official Music Video]](http://i.ytimg.com/vi/J5IeFzr2GgE/mqdefault.jpg)
show the part where nylon cord gets around the glass at start.
Right!
Thats the secret
Bingo! That's what I want to see too.
so the string is placed in a crack somewhere out and is looped back in the glass then pulled threw
@@marcelllegend8844Mas igual não explica, ele tá tirando ou colocando o vidro ⁉️🤔
Terbaik bang
Bole tunjuk sikit tak mcm mna masukkan cable tu kt celah cermin😅
Banyak kali tgk video abam
Terpikir mcm mna selit cable kt celah cermin
Tapi mmg terbaik bang👍🏻
Boleh… Terima kasih support bang💪
@@AbamRongg sama² bang🤙🏻
masih ingat 20 thn dlu buka cermin guna cable brake basikal,,sorang tarik dari dalm,sorang tarik dari luar,,berpeluh juga ketiak kena..ahahah
Esa es una de mis preguntas también 😅😅😅😅 es imposible sacarlo así.
Misinayı dışardan ucunu söküp,matkapla doluyorlar.camcılarbu işi naylon ip ile yapar
What we really wanted to see is how he got that thread in there between the window gap
That takes almost 3hours!!
Yes I want too also
Все очень просто,для этого используется длинная крепкая игла,похожее на шыло.
Yes thy dont show that
ガラス外し自体は優秀ですが、外したフロントガラスを車に立て掛けるのはやめて欲しいです。
Yeppirs, the missing part is where the loop is pushed out -- actually, could be anywhere ...BUT... unit is installed where the rear view mirror was. hmmm, so if the loop ends up at the top, then it is pushed through at the bottom center of the windshield, pulled ALL the way around the perimeter, and --voila-- wind each side a bit at a time and done. (btw,what you don't see is the 170° heatgun following ahead of the cable to soften the bonding agent a bit 😉)
Nah, tbh i didn’t use heatgun
Lo único mal det trabajo que hayan recargado el vidrio roto en el vehículo.
Классная вещь. Помню вынимал окно, с помощью канцэлярскаго ножа и тросика и это был тот ещё сэкс!!!
What about the plastic guid tabs at bottom or in corners does it cut through those as well. Or did that windshield not have those and only urethane.
😊😊😊
It cuts through them like butter
That’s coooollllll, I wish I had that when I was building salvaged vehicles as a teenager years ago
Mantap bangrong,penah buat dengan dia dulu,dia seornag yg komited,dtg rumah naik kelisa masa tu,ingat lg,semoga terus maju jaya bangrong
Zaman naik kelisa zaman aku mula2 tu, terima kasih bang pernah support kawan 🙏
Boleh tunjuk cara masukkan tali nya? Dan d mana boleh beli alat tu
Esas cosas son del deabolo😮😮😮😮😮😮
Where did the string come from? And how did you get the string into the windshield? This seems very tedious
Wire feeder. Peirce it through the bottom. Between the glass and dash.
Doesn't show us how to get the wire in the windshield (to push the trigger)
And that is the fish line it will snap easily
That is my question too
Me to 🇬🇧
With a long tool usually you pass it through at the bottom. It’s like a needle 🪡 very easy.
Wire feeder. Peirce it through the botton between the glass and dash.
How do you put the strings inside the glass perimeter, I didn't see that one 😅
Watched a guy put a windshield in a jeep yesterday. He used a reciprocating saw with a giant butter knife blade . Way easier than this contraption.
Sorry you didn't show all of it!!!
Fun fact:
Volvo using device like that in they services back in 2001....
It even has part number...
Wiihhh.. Mantap abang ini cara melepas kacanya ..👍
Só complicão saudades dos carros anos 85 pra baixo
Missed out the important bit 😂😂😂
I miss the good old days when the glas was easy to remove and fit by yourself. Nowdays the shit is glued and part of the cars structual integrity...😮
Bahase apeee tuuu
Da fehlt der Part wie das Seil in den Scheibenrahmen eingefuehrt wird.
Your right
That is the secret you pay for.
Your right I'm looking and nothing is showing
ใช่มันคือการ ตัดต่อ 😂😂 ไม่มีช่างคนไหนอยากบอก
So how’s the wire get around the screen at the beginning??
Safelite used this tool to remove the windshield from my 2011 Hyundai Sonata SE 2.0T about a month ago. So much easier than doing it the old fashioned way.
Very cool! I'm trying to figure out how they get the cord started around the window trim without pulling off all the panels?
But how you insert the wire 😅
Se inserta con una espada que engancha el cable de dentro para afuera por la parte del salpicadero hacia afuera luego rodead el cristal con la cuerda por fuera
没看明白，那根绿线是咋套在前玻璃上的？
Eso también yo no entiendo cómo fue a quedar el hilo verde en el vidrio como lo metió en que momento hizo eso
No more scratching to the bone. I assume the surface should be flat enough to re-glue the windshield. If not, I've scraped gasket off aluminum surfaces and know that with everything clear, the gasket can be removed gently without scratches. I really like that tool. Nice job and great video, thanks.
No muestra como introducir rl hilo.
I wish u shown step by step im wondering where the wire was placed
I'm with you. They are skipping the part I actually want to see
Isso mesmo, contou o vídeo. 😮
If you wanna remove then why to put? First put , then Removae .... But why?
Excelente herramienta
They’res a aftermarket windshield guy across town 79.99-99.99 installed for most cars. It’s a little bit cheaper quality but works , but better than 400.00 at the dealer.
🐐no grabaste donde como pusiste la tansa para q despege el vidrio 🙄
No hizo nada
Y funciona para retirar el sello del parabrisas de un autobús si es así donde consigo esa herramienta de que pais
ذكاء ومعرفه بالتعامل مع العمل
자매품 멀티커터를 사용하세요
시간을 단축할수있어요
얇고 길며 탄성이 있는것 사용해보시면 압니다.
😮😮😮asombrosa maquinaria😮😮😮
At my place they just used a small fire instrument, melted the glue, and removed it. Just took 2-3 minutes.
I used to do this job and remove the windshields by hand with a friend. Is less complicated and also faster than this.
1-2-3. Nice tool.
Mudah zaman skarang.. Dlu2 masa study dgn keja nak pasang cermin pakai tali lembu ja sorg luar sorg dlm tarik😅😅😅
А почему непокозал как нить он заправил внутрь ааа????
Шилом
En peru lo sacan cin una soguita sin maquina ni taladro
Benar Bung tapi saya rasa awalnya seluruh negara😅
А как запихнули нитку в лобовое стекло
Этот секрет уже бабки😊
Ну обычно шилом с крючком ,в герметик который между стеклом и кузовом .Как сапожник)
Terbaik AbamRongg,dulu pernah tukarkan cermin teksi saya di hadapan tropez residence danga bay
す😮😊😅
Aquí en México es mas rápido y barato, con solo un hilo de acero y dos personas uno a fuera y otro adentro van cortando el sello y ya con las ventosas quitan el parabrisas. Lo mismo pero mas económico.
How u getvthe wire undervthe windshield seems more importantvthst showing pumpimp amd 30 seconds of an impact gun
Un amigo se dedica a la instalación y sin esa herramienta los quita mucho más rápido
Hi brother I need this tools can you tell me where I can buy it
Kedai kt mana tuan..boleh claim insuran x nk tukar cermin
Ganti kaca depan avanza veloz 2015 brp duit tuh bang.....tanya2 dulu yaa
Dulu buat manual .pkai cable brek basikal .tarik kanan kiri tp mkn masa nk buat .lenguh tangan
Betul, tiada yang dulu tiadalah yang kini 💪
Ada buat claim insurance cermin ke
I’d have been putting it back in before they got it out. Cool tool but slow
Wah ini baru canggih alatnya,soalnya nyopot kaca dgn silent original nya sangat susah dan bisa tapi lama dgn metode manual 👍yg saya pikir bagaimana cara kabel tis nya itu?mohon petunjuknya maseee 🙏🙏🙏
keknya itu tali yang di mesin di copot dulu itu kan kiri kanan tali nyambung cuman 1 tali , jadi itu copot trs di selipin kiri kanan kaca ntar di masukin kek mesin ya dah deh tinggal bor ,logika gw gitu sih
"Cool. Now get that off the front of my car" 😂
Lo mejor es la parte final donde rayan parte delantera del audi
What's the tool name and where we can find it
Donde se puede conseguir esa herramienta??
Boleh jga tuh batu cincinya😂
Kami dulu potong guna tali gitar je,sekarang special toll banyak dah senang buat kerja
Me manda o link de onde posso comprar essa ferramenta por favor.
Genius invention, genius design.
Самое главное это момент продевания шнура в зазор между стеклом и рамкой где он😂😂😂
bang tuka cermin alza 2012 berapa
Cortaron la mejor parte! Cuando le pasan el hilo al cristal!
What the name of this tool?
Good job..😊
Soy de República Dominicana y ese es mi trabajo, y llevo tiempo queriendo conseguir esa maquina, me puede dar información de donde la puedo conseguir?
Opa que muito bom amigo preciso de um desse aqui no Brasil
HOW DO I ORDER FROM TOBAGO 🇹🇹
VERY INTERESTED
How well does it work with a shattered and big-time cracked windshield?
you didn't show anything with the yellow cord 😮 FAIL!
Boa ,tecnologia ,se for usada ,para o benefício de muitos trabalhadores......😂😂😂
Buenas máquina,yo la tenía buenas pero no cómo está mi enhorabuena a todos estos trabajadores 👌👌👌👌👌
Muito engenhoso, top👏👏
How did the thread get on the outside of the car screen? Or its magical?
hope u barakah always ❤
Ипни кандай утказганини курсатиларда
How can I get this tool?
U don't needs this you needs an steel wire put in window nd pull all sides
Mantan bosq,kasih tau yg jelas tutorial nya😊
Genial 😄
Excelente profissional!!!
Thank you!🙌🏻
Excelente herramienta 🔧
Нихрена не понятно, но очень интересно
Onde posso conseguir essa máquina??
前檔玻璃更換的過程
用線切 是很好的方式
不會傷到板金 油七
Dulu pakai tali kawat tipis, satu di dlm satu di luar tarik menarik 😅😅😅
we need to buy the needle separate?
Gmn cara masukin talinya
Long tool like a needle 🪡
Gostaria de saber o nome dessa ferramenta e onde comprar?
A máquina até pode ser boa mas mostre como instalar o cabo em volta do vidro fica mais melhor.
I dont get it,did you need to make a little bit of spaces between the windshield to make tht wire get through?
How did u get the wire to the other side ? The most important part need to see
Alguien me puede apoyar en como se llama esa herramienta o donde la puedo adquirir
Кольца у него конечно мощные
Tengo un amigo que los quita en 3 minutos y a mano
Aquí en Perú también!.... Jajajaja!
Как называется инструмент?
I would have love to see how they worked the thread in the gap .
Donde puedo adkirir..esa herramienta
Akik nya sangat membantu