@@JackMehoffZaddybutt? Nah man, that’s a portion of the frame that his ventriloquist hangs on to. Has nobody noticed he looks like that “Walter” dummy. “C’mon man, listen up fat. I got one word for you pause hibbanygeninygalacanchus fermatisticle amil inmerica!” (Thump…secret service rushes in to prop him back on his stand so he can shake hands with his invisible demon friends before the marionette drags him off set) Also The government actually has these to reach out and steal 30% of your paychecks and sent your money to Ukraine, Israel, Gaza, illegal immigrants, corrupt judges, and uses the rest to buy more Phizer stocks.
There have been many versions of the 'hickey bar' around longer than my 58 years of life. Being a 3rd gen bridge builder I saw these things laying around since able to walk. There are simpler designs than this type. Some are sold commercially too.
He made a Bendix. I once made a lathe out of an old record player motor and used that to make small chess pieces for a small chess board I made in middle school. A bendix is indeed used all around the world. Among its uses are pipe-bending and for tying fencing to posts and many other things.
@@garymericano The motors in those things spin considerably faster. I used cut up pieces of coat hanger for the tools and sharpened them with a file. pieces of dowel with a small hole drilled in them so I could tap them onto the motor's spindle became the chess pieces. To finish shaping the pieces other than the pawns and the queens I used a hack saw blade and pocket knife. Black walnut and maple stains and a light coat of polyurethane spray and they didn't look half bad.
@@comfortablynumb9342 Because every guys builds their own. Its part of the trade. Shows that you know what youre doing. Pretty obvious that someone who can bend bar can make a tool to their preference, just as a carpenter does with spacing tools and jigs.
@@comfortablynumb9342 also, as shown not even the most complicated build so why buy when you have enough rebar leftovers to make your own or in the most dire of needs make a throw away one from wood.
5 of my brothers are ticketed welders, tool and die makers and C and C operators, making tools, gigs, dies etc, it is second nature for welders to do this naturally.
@@glenncoody Any welder worth his salt who can make a pickle fork will obviously go to a glass blower to have the appropriately sized jar made. And then to a metal fabricator to make the lid and a submarine door manufacturer for the rubber seal.
It's a Great Idea for Small Rebar because Every size Has to Rolled on a Bigger Roller or the Rebar is Crystallized!!! Worked as a Rodbuster in 15 States over 27 Years building Nuclear, Coal & Hydro with Dywidag Rebar coming from East Germany in 1979!!!
Можно это сделать всё гораздо проще! Берëшь пруток сантиметров 40 и две гайки. Одну варишь в торец, а другую с другого конца в нахлëст. И вуаля, ключ для загиба хомутов готов. Это тоже достойный вариант, но много заморочи в изготовлении😊
@@hardball_man первую гайку варите в торец прутка, чтобы отверстие гайки смотрело перпендикулярно прутка. Вторую гайку варите с другого конца но уже на тело прутка, так чтобы отверстие гайки смотрело вдоль прутка. И получается ключ для загиба хомутов с разных концов под разные задачи
Rod busters have bendy tools, twisty tools, stretchy tools, cutting tools, spacing tools, all that stuff already. From hand held to PTO attachments for tractors and for Bobcats and excavators...
Как говорил один известный человек:"вся суть лайфхака не только в том, чтобы выкинуть из своего воспалённого мозга какой-то очередной выкидыш, и не только чтобы этот выкидыш хоть как-то работал, но и в том, чтобы оправдалось затраченное на него время"...
This would be made even better if one of the hooks was pitched at a 45 degree angle but still maintained its alignment with the other so you could wrap the wire evenly! The welds were the best part. I have never seen such clean welding before!
Fachgerechtes Schweìßen und Trennschleifen bei einer Erfindung von mobilen Handarbeitsgeräten für Befestigung von Stahlgerüsten😊.Das ist eine wirklich tolle Sache😊.Dieser Erfinder sollte das erfundene Gerät in Serie herstellen sodaß alle Baubetriebe in der Welt davon profitieren kõnnen😊.Für die Zukunft ist das eine absolut geniale Idee für alle Leute in der Welt die eine Schweißer-Ausbildung abgeschlossen und einen Schweißerpass haben😊.Supertoll diese mobile Handhilfe😊.Für die Arbeit draußen auf dem Bau absolut zu empfehlen😊.Spitze😊.
@@flashgett9178 Приветствую!!! Такой способ можно реализовать, если, к примеру, сделать подходящих размеров матрицу и потом уже из готовых рамок/хомутов собирать каркас!!! В случае сбора каркаса, как это делается в ролике, через несколько хомутов ширина и высота самого каркаса начнёт уменьшаться...
@@flashgett9178 Сам строю себе дом в чистом поле и чуть-чуть знаком с этим процессом... Я себе сделал специально станок, есть фоты, но в комментариях нет возможности их выложить на публику, к сожалению...
I used a very similar tool 20 years ago. it was older than all of my team combined back then... this reminds me of that poor composer that was able to create new songs, only to discover they were created long before his birth.
@@user-mu7tm1ow9y скажи мне, что в данном случае, эта прихватка была необходима и без неё ничего не получилось бы. Металл бы увело настолько, что бы ...что? Арматура не сгибалась бы?
@@sanyaigorevichкапнуть 3-5 прихваток это не труд,зато крепкая конструкция.как чувак работает мне нравится,и его ролики.тоже.80% критиков такой подгонки и аккуратности не сделают!,а кому нужны эти причиндалы это совсем другая история.
@@The_Synator Yes, because a consumer display does not emit the UV- and IR-rays that damage your eyes during welding. Do you also put shades on, when you're watching videos that show the sun? LOL.
@joeschmoe3815 did I say damage your eyes? No, I said blinded by it. I've been around a lot of welding and if you aren't getting blinded by the light from the video, you are lucky, but I know damn well, others I've shown this too have agreed that was too damn bright. Have fun kid.
@Z4mUs that item has been available commercially for a while so he does NOT have the patent for it. Quit believing everything you see in the internet as a new invention.
@@Lonewolf0161 He even made one out of GOLD mate. He had to prove he is the INCARNATION of his invention at a welding competition I tell yeww. Where ya been all yer life? Crawl out of yer grandma's ubbers already mate.
@Lonewolf0161 I just invented a new thing that you hold in your hand and can watch people argue about stuff they don't actually know anything about... I call it fahone 😏 🤣
I’d change the design a little bit. Eliminate the u-shape piece replacing it with a straight piece across then weld another straight piece across at the top of the bend in the u-shape then weld the long hand on the backside that eliminates cutting the tac weld pieces at the top. In doing it this way eliminates all this second operation work and you don’t have to waste time lining up the piece of rebar you want to bend on either side , just slap it in and bend your done.
"Wellness day" at the Welding hall... they all assumed it was "welders day" . 100+ individuals showed up at the welding bay, not the med. Center where they supposed to receive med. Benefits .
Wait. He's only using the rebar on the sides to make the bends. It limits what size rebat he can actually bend. Just weld a piece of rebar to connect those two pieces. Then you have something you can use more sizes.
That's a cool homemade tool and all, but bending tools have been in existence for hundreds of years. Tools meant to Bend rebar specifically have been in use for well over a century.
Hey man thanks for the video. That's a handy lil tool to make. Good thing is, it's made out of cheap ol re-bar and serves it's purpose very well..good job 👍🤘🇺🇲
Don’t get me wrong, it’s neat that he made that. I have four of these that I bought in the store years ago.
Why do you have 4?
@@bbq878the man obviously has a lot of shit to bend 😂 homie has a job working
@@jackgreenstalk777 Common 4?? Leave some bending for the rest of us.
😂😂
Please insert girder.
Chuck Norris back scratcher😂
YES XD
Joe Biden but filler
@@JackMehoffZaddybutt? Nah man, that’s a portion of the frame that his ventriloquist hangs on to. Has nobody noticed he looks like that “Walter” dummy. “C’mon man, listen up fat. I got one word for you pause hibbanygeninygalacanchus fermatisticle amil inmerica!” (Thump…secret service rushes in to prop him back on his stand so he can shake hands with his invisible demon friends before the marionette drags him off set)
Also The government actually has these to reach out and steal 30% of your paychecks and sent your money to Ukraine, Israel, Gaza, illegal immigrants, corrupt judges, and uses the rest to buy more Phizer stocks.
Chuck Norris doesn’t get itches, itches get Chuck Norris’d
I thought his back scratcher would be a bear claw or a tigers claw
Dude,I have this tool from my grandpa s dad.Forge welded. From the 1910s.....
I can't imagine that that thing breaks down because it will never...
Your Grandpa must have bought it off a time traveler.
There have been many versions of the 'hickey bar' around longer than my 58 years of life. Being a 3rd gen bridge builder I saw these things laying around since able to walk. There are simpler designs than this type. Some are sold commercially too.
@@JanFWeh😂thank you for that, laughed out loud
1910s would have been MY grandpa. Damn now I feel old
As a novice, I appreciate when an old head takes the time to show how it can be easily done rather than rely on my money out of pocket
Thank you for a video without music ❤🎉
YES! Love to hear just the sound of the tools.
Welders are creative people. My late husband was a welder.
Yes they definitely are. My husband is a welder too. I'm so sorry for your loss ❤
Mgbada
Welders aren't people, they're machines. Your late husband may have been a weldor, but not a welder.
روحش شاد
They’ve had these for literally hundreds of years , LITERALLY !
He made a Bendix. I once made a lathe out of an old record player motor and used that to make small chess pieces for a small chess board I made in middle school.
A bendix is indeed used all around the world. Among its uses are pipe-bending and for tying fencing to posts and many other things.
would love to see that lathe :)
Did your lathe just turn at 78rpm?
I'd be surprised if that motor had much torque behind it either
@@garymericano The motors in those things spin considerably faster. I used cut up pieces of coat hanger for the tools and sharpened them with a file. pieces of dowel with a small hole drilled in them so I could tap them onto the motor's spindle became the chess pieces. To finish shaping the pieces other than the pawns and the queens I used a hack saw blade and pocket knife. Black walnut and maple stains and a light coat of polyurethane spray and they didn't look half bad.
I misread that. Thought you said small cheese pieces first time through...
Every rebar guy I ever hired had all those tools made by hand ready to go.
😮😮
Why can't you buy the tools?
@@comfortablynumb9342 Because every guys builds their own. Its part of the trade. Shows that you know what youre doing. Pretty obvious that someone who can bend bar can make a tool to their preference, just as a carpenter does with spacing tools and jigs.
@@comfortablynumb9342 also, as shown not even the most complicated build so why buy when you have enough rebar leftovers to make your own or in the most dire of needs make a throw away one from wood.
Yup, we have those on every site and column yard, it's called a pickle folk
5 of my brothers are ticketed welders, tool and die makers and C and C operators, making tools, gigs, dies etc, it is second nature for welders to do this naturally.
It's computer numerical control, not computer and control
CNC was what I was thinking, too.
Japanese woodworkers be like ...
Cnc, jigs.
As a CNC Machist. Tool & Die maker. Fixture maker. Basically everything listed here. Why all the bickering over nothing? A good job would suffice!
I can't imagine how I managed to get this far in life without one... Oh, that's right I have had and used one for the last 40 years... Good invention.
What's the name of this tool?
Загибалка! @@mihir1700
@@mihir1700 One commenter called it a "pickle fork". I don't see how you can get it into a jar of pickles though....😂
@@glenncoody Any welder worth his salt who can make a pickle fork will obviously go to a glass blower to have the appropriately sized jar made. And then to a metal fabricator to make the lid and a submarine door manufacturer for the rubber seal.
Hands?
It's a Great Idea for Small Rebar because Every size Has to Rolled on a Bigger Roller or the Rebar is Crystallized!!! Worked as a Rodbuster in 15 States over 27 Years building Nuclear, Coal & Hydro with Dywidag Rebar coming from East Germany in 1979!!!
I wasn't wearing my protective eye gear when watching this video.
I am not sure if you are able to read this comment now... sorry brother, for your loss
Actually yes they should take care of the viewer😮
可以拿一張白紙塗黑，黑色地方鑽二個小點，這樣之下就可以保護臉部不讓灼傷
Violated safety regulations😂
😢
That is awesome, however I was a rod buster for 22 years and we made them all the time for this purpose.
Enjoy
couldn’t just leave it at “that is awesome” could ya’ 😂
Draggty@@josewales892
Hicky bar
I worked for steel reinforcement fabrication co in UK for 10 years,
.
A nifty back scratcher, just what the world needs!
A small 1/2 inch pipe will do the job.
I was gonna comment the exact same thing.
😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊 AA😊😊
9@@efraincastilloruales1628🎉
But the work of the tube remains incomplete
Nowhere near as easy-fast or as tight and tidy as this tool
Забываете о правилах безопасности, надо перед сваркой кричать "Глаза"! 😅😅😅😅
😊
Yes, clickbait is indeed a useful tool, used worldwide.
Why do I continue to watch these damn welding inventions videos!
Es muß mehr erfunden werden,sodaß die Arbeit wo auch immer mehr Spaß macht😊.
You should've told me I have to wear glasses while watching this video.
🕶️
I didn't know we needed them lol! When viewing a video footage
Didn't know we needed them when viewing a video footage lol !!!
Lots of heavy flashes and such can cause seizures.
Same with videos the reason most have a warning.
@@boundforglorywtI had seizures this isn't gonna do anything
I can't think of a single reason why I would need something like that.
It is because you don't work the job that requires tools like that.
No because you are a Sander not a Welder!
Nice job! I've been a welder for almost 43 years! I love seeing stuff welded with a 7018 stick rod! Most new welders can't do that!
We use this exact tool, only machined, when building barbed wire fence. And have been using them my entire adult life. I'm almost 40.
I thought he was making a homemade weapon at first 😂
It definitely would work as a weapon
@@thomaszinecker1785 plenty of people
Можно это сделать всё гораздо проще! Берëшь пруток сантиметров 40 и две гайки. Одну варишь в торец, а другую с другого конца в нахлëст. И вуаля, ключ для загиба хомутов готов. Это тоже достойный вариант, но много заморочи в изготовлении😊
???
@@josecl41 ???
???ЯННП, но прошу подробности. На неделе как раз буду заливать опалубку под теплицу.
@@hardball_man первую гайку варите в торец прутка, чтобы отверстие гайки смотрело перпендикулярно прутка. Вторую гайку варите с другого конца но уже на тело прутка, так чтобы отверстие гайки смотрело вдоль прутка. И получается ключ для загиба хомутов с разных концов под разные задачи
@@hardball_man this man tryna grow Mary Jane
Rod busters have bendy tools, twisty tools, stretchy tools, cutting tools, spacing tools, all that stuff already. From hand held to PTO attachments for tractors and for Bobcats and excavators...
Where’s all my first year apprentice chiming in to say the weld is shit and it won’t pass x-ray? come on, i know you want to….
😂
Real
The weld is shit bro, it won't pass x-ray...😮
@@richardlincoln8438 there it is
Ze veld is gud
Nota 10 irmão, o mundo precisa de pessoas do seu gabarito!!!!!!!!❤❤❤
Cant believe I'm saying this on a YT short, but your welds look good bud!
That same tool is already on the market and you can get it at home Depot Lowe's and other stores that sales tools. THANKS FOR THE VIDEO
Yes. And it's called "welded rebar slingshot" 😎👍🏼🤙🏼
Нижнее. у неё 4😊88э😢з😢😢😢😢😊😊😊😮🤷🙊🚯🙂🙅👎😤😤😤🤦♂️😢🎉хэ фу 3😊😊8х💕💕💕
8😊ээ😊😊😅😊
And back scratcher
That would be awesome honestly
Как говорил один известный человек:"вся суть лайфхака не только в том, чтобы выкинуть из своего воспалённого мозга какой-то очередной выкидыш, и не только чтобы этот выкидыш хоть как-то работал, но и в том, чтобы оправдалось затраченное на него время"...
😊😊😊😊😊zzp😊p😊😊
5@@abnermanio1454KO ini
Крутяк
Доктор Дью
Si viva ukrania
Necessity is still the mother of invention
I took less time to make this than it would get to go through a checkout line.
Только вот на чем согнуть первоначальные куски арматуры !?
руками)
W zębach 😂
Обычно зубами это сварщики делают,докуривая бычок четверки...🤣
😂😂😂 не говори
А вот эта задача для зрителя😂
I like how he was able to adjust it after the first weld...
I mean yeah it's called a tac weld for a reason.
@@RC_Trailblazers yes and tac welds are supposed to HOLD them together 🤦♂️
1st time I suffered weld flash from a video
I didn't wear goggles watching this, will I die?
За 25 лет сварки столько зайчиков не поймал, как с этого видео 😢
Тоже нахватался кажется)
А мне еще окалина от болгарки прилетела
Larga vida ukrania espasiba
Когда смотрел ролик маску слабо было надеть?
@@prizrak5002бухани грамм 200 на каждый глаз и будет тебе счастье.
Instead of cutting the extra piece, begining itself exact measurement rod can be used
😂😂😂😂😂😂 so you finally found a flaw in his work 😂😂😂😂
It would be harder to bend...
Rebar tool made from rebar? Genius!
This would be made even better if one of the hooks was pitched at a 45 degree angle but still maintained its alignment with the other so you could wrap the wire evenly!
The welds were the best part. I have never seen such clean welding before!
Хорошая приспособление, но из трубы сделать проще👍
👍👍👍
Fachgerechtes Schweìßen und Trennschleifen bei einer Erfindung von mobilen Handarbeitsgeräten für Befestigung von Stahlgerüsten😊.Das ist eine wirklich tolle Sache😊.Dieser Erfinder sollte das erfundene Gerät in Serie herstellen sodaß alle Baubetriebe in der Welt davon profitieren kõnnen😊.Für die Zukunft ist das eine absolut geniale Idee für alle Leute in der Welt die eine Schweißer-Ausbildung abgeschlossen und einen Schweißerpass haben😊.Supertoll diese mobile Handhilfe😊.Für die Arbeit draußen auf dem Bau absolut zu empfehlen😊.Spitze😊.
diese Dinger gibt es seit mehr als 20 Jahren und es gibt einige Hersteller die diese in Produktion haben und am Markt anbieten, Das ist nix neues.
Cool! At first I thought it was a ball scratcher.
Gotta love it when they don't make tool u need make it yourself. Works great nice thinking 🤔
El ser humano es un creador y recreador, en cada instante de su vida. Te felicito amigo
😊
👍🔥😱💯 mantap 💯
Genius. Often the need for a specific tool results in its creation. Well done 👍👍
That's probably why it was invented over 100 years ago.
Watching this on my phone without my hood down made my eyes hurt... lol.
Приветствую!!!
Так собирать каркас не очень правильно, так как рабочая арматура потеряет параллельность...
Русские смотрят по крайней мере профессионально на такие изыскания в плане армирования . Почитал верхние отзывы , ЭТО ПИПЕЦ !
Hi, what do you mean: "потеряет параллельность"?
@@flashgett9178 Приветствую!!!
Такой способ можно реализовать, если, к примеру, сделать подходящих размеров матрицу и потом уже из готовых рамок/хомутов собирать каркас!!! В случае сбора каркаса, как это делается в ролике, через несколько хомутов ширина и высота самого каркаса начнёт уменьшаться...
Hello. There is logic in your words. Thank you.
@@flashgett9178 Сам строю себе дом в чистом поле и чуть-чуть знаком с этим процессом... Я себе сделал специально станок, есть фоты, но в комментариях нет возможности их выложить на публику, к сожалению...
thank you bro for sharing.congratulations
I used a very similar tool 20 years ago. it was older than all of my team combined back then...
this reminds me of that poor composer that was able to create new songs, only to discover they were created long before his birth.
The high-pitched squeeling in the background was uncalled for.
At first, I thought he was making an industrial strength back scratcher 😮
Cow Bar😢
We call these 'hickey bars' theres several different designs. Some are able to bend heavier rebar than this one.
Сварить нижние концы, что бы потом отрезать их болгаркой. Гениально!
это полная хуняя
Тоже, об этом подумала.
Есть такое понятие что металл ведёт, поэтому и прихватывают!
@@user-mu7tm1ow9y скажи мне, что в данном случае, эта прихватка была необходима и без неё ничего не получилось бы. Металл бы увело настолько, что бы ...что? Арматура не сгибалась бы?
@@sanyaigorevichкапнуть 3-5 прихваток это не труд,зато крепкая конструкция.как чувак работает мне нравится,и его ролики.тоже.80% критиков такой подгонки и аккуратности не сделают!,а кому нужны эти причиндалы это совсем другая история.
Took too many extra steps to make this. Next time, warn viewers also from blinding light from welding.
😮😮
LOL. Can't be blinded by watching it on your monitor or tablet.
@@joeschmoe3815 wanna bet??
@@The_Synator Yes, because a consumer display does not emit the UV- and IR-rays that damage your eyes during welding.
Do you also put shades on, when you're watching videos that show the sun? LOL.
@joeschmoe3815 did I say damage your eyes? No, I said blinded by it. I've been around a lot of welding and if you aren't getting blinded by the light from the video, you are lucky, but I know damn well, others I've shown this too have agreed that was too damn bright. Have fun kid.
Now be honest. How long did it take before you realized he was making a rebar twist?
It's no small wonder, that I have any eyesight remaining. These people keep welding without providing me welding lenses.😂
Still waiting for the thing he invented, the thing in video has been around for years, though not typically made from the softest steel you can find
He's the first one to hold a PATENT of the thing. What do ya do fer a livin? Browse Facebook? Come out here and start building your own contraptions.
@Z4mUs that item has been available commercially for a while so he does NOT have the patent for it.
Quit believing everything you see in the internet as a new invention.
@@Lonewolf0161 He even made one out of GOLD mate. He had to prove he is the INCARNATION of his invention at a welding competition I tell yeww. Where ya been all yer life? Crawl out of yer grandma's ubbers already mate.
@Lonewolf0161 I just invented a new thing that you hold in your hand and can watch people argue about stuff they don't actually know anything about... I call it fahone 😏 🤣
@@user-ro1gn8tb9y I hold the patent to that Fahone ya thief! Where is the receipt? Me hold da patent me tell yaaa
This is a bad quality welding job.
I thought it was going to be a tool for removing protesters from the middle of the road.
I’d change the design a little bit. Eliminate the u-shape piece replacing it with a straight piece across then weld another straight piece across at the top of the bend in the u-shape then weld the long hand on the backside that eliminates cutting the tac weld pieces at the top. In doing it this way eliminates all this second operation work and you don’t have to waste time lining up the piece of rebar you want to bend on either side , just slap it in and bend your done.
По привычке закрыл глаза, наверное видео интересное😂😂😂
That Tool will Changes Lives
👍🏻
Oh wow this is acually pretty geenus
"Wellness day" at the Welding hall... they all assumed it was "welders day" . 100+ individuals showed up at the welding bay, not the med. Center where they supposed to receive med. Benefits .
The rebar had to be 706, just adding that for the people wanting to do this
Very nice,and creative
I love it! But I’m now temporarily blind!!! 😂
I really like watching the sparks in person with my eyes wide open. It makes my dreams funny and holey
As handy as this is , i have seen probably 20 different versions that do the same thing
Every time I see that arc I involuntarily try to nod my hood down.
Can we start a go fund me page so we can send this guy to welding school and maybe possibly buy him some welding gloves
This video gave me welders flash and now I can't go in to work tomorrow 😢
OK, admit it everybody who thought it was gonna be a back scratcher.
I have welders flash now. I can’t watch the video 😮
A "Welders Goggles needed" warning would have been helpful....'BLINK'....thanx.
Bonus: It's also a back scratcher!
My best wishes for your channel nice skill thanks
While I applaud your ability to make one, you know, you could just buy one.
Wait. He's only using the rebar on the sides to make the bends. It limits what size rebat he can actually bend. Just weld a piece of rebar to connect those two pieces. Then you have something you can use more sizes.
It would limit the angle of bend on the finishing bend.. look again.
I thought he was remaking Aquaman’s staff
Not gonna lie... was expecting a back scratcher.
My dad made a recliner out of rebar. I didn't tell everyone that he invented the chair.
I've used these for Barbied Wire and livestock fencing for decades.
By the time tool is ready I am blinded by your welding sparks
Masterful. Can’t imagine what else you have.
That's a cool homemade tool and all, but bending tools have been in existence for hundreds of years. Tools meant to Bend rebar specifically have been in use for well over a century.
The hickey bar was invented before this guy was born.
Damn, thought it was a slingshot 😂
All those people saying you bought one in store or have one from the 1900’s… what is the tool actually called?
Rebar bender.
1/2" pipe works just fine !😂
I bend the wire with my hands. Gets tiring though so I just use vise grips. They make a sharper bend
I thought he was making a BBQ tool 😂
Already patented, "Sorry Charlie!"
Hey man thanks for the video. That's a handy lil tool to make. Good thing is, it's made out of cheap ol re-bar and serves it's purpose very well..good job 👍🤘🇺🇲
Dude that tool was done years ago in Mexico! They improvise as do the Cubans with their mechanical work on vehicles
I like all your working find them to very interesting and it grabs my attention great job.
I work at a welding shop that everything has to be done by blue prints.. That's why they call it Precision Steel.
Work and medam work call nota dosta
To be fair, he never claimed the guy invented it recently. 🤣
Im not in construction, but i refuse to believe that is a new invention...