Ive played a 498t/490r combo in an sg for 25 years. To this day it is still one of my favorite pickup sets. Articulate and well rounded. Blues, classic rock, indie, or metal. They do it all. I appreciated the honesty in your video. Good job man.
@@gibs8412 The 500t isn't as versatile as the 498t. The 500t has a bit more high end bite and output (HOT). It is a firebreather of a pickup for heavier tones. I have a set in my Explorer and Les Paul. They fit my style of playing. Some think they are harsh but to me it depends on the application. For metal tones, I prefer them to lots of other pickups.
@@michaelglass3993 I got the 496/ 500 set in my Paul. Honestly I couldn't really tell the difference between these. My main guitar is a L Sensor Strat. So my amps are sorta set up for this guitar. Les Paul just smokes whatever I plug into. It's loud so I lean on it that way. Sounds so good through my Boogie.
I didn't hear a difference, given I'm hearing this on my phone. After using SH4's for nearly 40 years - I have them on a Studio and Standard from 1990 and 1996 respectively, a rebuilt early 80's JBJ in the Studio and a late 80's JBJ in the Standard, my guess is you'd really not hear a difference in the room that mattered if you took the covers off the stock Gibsons.
The 498T has got to be one of the most underrated pickups out there. People think they are cheap because they are in Gibson's less expensive guitars (like Les Paul Studios) but they kick ass.
I have the original Patent NO. T top P/ups in my 73 Les Paul Custom, and I would no more change them, than I would change my 498 T and 490 R in my 2005 SG Standard. If anything make sure you have 500k pots because that well make a big difference in how your pickups sound.
@@jesterjigs9914I just put a 498t/490r set in my Epi Jerry Cantrell wino LP Custom and they are absolutely amazing. Wouldn't use anything else, and I have tried a lot of different pups over the years and always came back.
I put a JB in my Les Paul and TBH I think it was a waste of money, the difference in tone doesn't justify the cost, the 498t was a good pickup already.
I agree, I bought a duncan JB to put in a Jackson Dinky and it is still sitting in the box on a shelf. After scouring some comparison video's the stock jackson high output humbuckers sound every bit as good as the JB. I will save it for a future Ibanez, they have horrible stock pickups and I always change them out.
I completely agree. The JB has a slight more clarity/definition, but if you take the cover off the 498T, it would sound much like the JB for no extra expense.
took out the 498t's for the JB's after a week I put back the 498's. I have a 1999 Gibson Les Paul Standard. The JB's lacked low end. I paid $50 to have it put in, but I took them out myself. This is an excellent video comparing both. . Good job!
I think that, if you’re thinking of spending money on changing pickups, you should pick the replacement based on sound, not on reputation. If the pickup you have already does the job you want, then there’s no need to change, but if it doesn’t give you the sound you want, then it can be worth buying something different. Like going from low-output A2 humbuckers to high-output ceramics is probably more worthwhile than just paying money for slightly different low-output A2s. Also, if you can buy used, and sell the ones you take out, it’s better value than buying new pickups and keeping the originals in a drawer (obviously).
I have Les Pauls with both and have played both extensively in live and studio settings. The JB is a great pickup for live stuff because it’s really hot but also very stable (more on that in a sec), so it sounds good through a variety of amps and can often get enough gain even on its own unless you need a lot. But despite the high output, it’s also dead quiet (this is the “stable” part). I play a 50w Marshall and have zero feedback problems. It never squeals. 100% controllable. That said, the 498T produces better tone, IMO. It’s just a lot more balanced and with a wider range; the JB is a lot boxier by comparison. And I’ve found this to be especially apparent in the studio. Not to say that you can’t get good tones out of the JB in a studio setting, but I’ve consistently found that my guitars with 498ts always sound better. So the JB is the layup; it’s great live and it will sound good in a wide variety of situations. But it loses some range in achieving that amazing balance and consistency, and that range is what the 498t has.
Great video. To my ear, the 498T was warmer and fuller; I preferred it in all samples except the heavy distortion, where I felt the highs of the JB cut through clearer. As I'm not a high distortion player, 498T would be my choice. (Thanks. This is now a change I don't need to do with my Gibson, I was contemplating JB swap, but your test as shown me I prefer the stock - cheers!)
Great video mate , yeah that’s why we play Gibson coz we want that classic Gibson sound that most recording such as sabbath , kiss , zeppelin , etc etc used to make classic sounding songs , yeah a jb would be nice in a Jackson or Ibanez but I like to keep my Gibbo standard , I’m partial to dirty finger pickups also .
Hey thanks Simon you really answered my question. I have a Les Paul Standard with a Burstbucker 61R in the neck which is stock and a JB in the Bridge. I also have a Les Paul Classic that came with the Burstbuckers 61R and 61T stock but I'm putting a Gibson 498T in the bridge of the Gibson Les Paul Classic. And as for gigs, I'm 54 so I don't really have any high hopes past the usual small bar gig, but dude you're way younger and I hope you really have an amazing experience as a musician, just go for it and never give up. Thanks and take care. Mike.
There's one major component that was overlooked here and that's the covered pickup versus uncovered pickup aspect of this comparison. The JB does sound crisper, more present and more raucous in this demonstration compared to the 498t, but I bet if you were to compare an open coil 498t to the same JB in this video the differences would start to get narrower and narrower very quickly. To my ears, the JB was a little bit more to my taste here, but the 498t is still a solid pickup and if I bought a Gibbo that came with one stock I'd leave it in.
There's also a difference in magnet type and strength, pickup height, and adjusting pole slugs one string at a time that can change the sound of a pickup, along with pots and caps. I had a set of 57's, a Classic and a Plus I put in an epiphone and always hated them, until I adjusted the height and changed out the caps, now they sound incredible. I did the height adjustment on my 79 Standard and those 490 and 498 combo sing.
I think they sound very similar and with this I wouldn't change one for the other! I prefer the 498t. I had one in an SG and love it. It has more of an open/sizerling tone and more p.a.f.
Honestly I've had both and they both sound great it all depends on your taste but even the covers make a difference if you have covers on the 498T I would remove the pickup covers and it actually makes it sound a bit better to my ears.
I have two Gibson Les Paul Studio's one has a 498T in the Bridge and the one I got for Xmas has the 490t and honestly 498T is. A WAY better sounding pickup vs the 490t. The 498 definitely seems to cut thru better.
So IMO the JB is probably the greatest pup you’ll find to replace any pup you don’t like. But would never consider replacing the 498 set with anything at all. I’ve had a less Paul studio that I’ve had for 25 years back in my younger days. I went through the pick up stage thinking I could make it sound better and going through about 10 different sets of very expensive pick ups I always ended up going back to the original set and still to this day have it. Nothing was able to beat them.
Agree - Great video. I love the 490R and 498T combination vs Seymour Duncan JBs, to me they just seem more dynamic and versatile across the rock/blues spectrum.
in the clean strumming it seemed like the 498t had more of a dynamic range and was peaking more on the harder strums, whereas the JB was more controlled and uniform. At least in this comparison.
I have a framus Xg D series where the previous owner had swapped the stock jb with a 498T. I was fuming it wasn’t mentioned, until I plugged the guitar in and played it. 498T is a solid sounding pickup
I swapped out the 498's that were in the Epi Les Paul Standard I traded for some Duncan 59's because I didn't like how dark they were. I always buy used pick ups so I don't spend a bunch of money on upgrades but I do get quality stuff, I also have a Dimarzio Super Distortion from an Epiphone SG I had and I might try it in my Les Paul
Nice video. I have a LP Std that I swapped burstbucker pros out for 59/JB and I’m glad I did. I have a 2019 SG that came with 490R/490T and I swapped that 490T out for a 498T which sounds great. Glad I did that for what I play. Still debate if I should put a JB in that as well....
This is great, thanks a lot! There is a hair more treble response from the JB, definitely. I’m leaning towards the 498T though, especially in my bright-sounding koa top Les Paul Custom. Again, thanks. This is just what I needed. Have you tried the Super Distortion?
Smart video and a good point. Im a huge fan of the jb , but the gibbie was real close, so you do have to think about cost vs reward. I got an old strat that was hotrodded with a duncan invader in bridge. The invader was too aggressive for me, so i went to a repair buddy and he offered a jb as a trade. Well yea that was perfect for me, and didnt have to buy it. Too many just want to swap pups out instead of workin em. Alot of people dont like hilo trons from gretsch.(low voltage) i love em, its relative cause if you put amp behind them, they scream. Cool video, thanks!
This is a great video. I have Duncans on my Japanese Les Pauls and 498s on my Studioand i love it both. Duncans are more clearer and has more presence on it, while the 498 is more airy and has this "open" sound. It all depends on what is your style and need.
exactly what I ear from Gibson pickups in general, there's no specific focus no matter what magnet is used. Maybe not what I would use for parts which requires a lot of articulation (i.e. progressive metal), still, these pickups are very versatile
I agree, I think just in the case of Gibson guitars, the 498T sounds really natural and like it was made to go in a Les Paul. Whereas JB is just an overall go-to for most other brands of guitars when thinking of upgrades etc
Great objective and educational video, thanks for doing this comparison for all us newbies. Your playing was great and the fact that you wrote it, is most impressive. I personally thought the JB sounded quite a bit better to my ear, more clear and pronounced, less fuzzie (probably not professional guitar language, but that is what I hear). That said, I can appreciate your points and logic to putting it back stock. Either way it's fun to tinker/experiment with stuff.
I bought that shirt at the gig when I saw them at he Monsters of Rock Tour in 1988. I also met Kirk at the airport once when my wife was on the same plane as him. Short guy, long hair.
Late to the game. I preferred the 498T on the heavier rhythm stuff and the JB on the lead parts. 498T sound more balanced overall. It got harsh, but not overly harsh. Perfect for standard rock stuff and using for studio stuff. The JB is a beast and will cut through most and, as you said, good for a live setting if you're into that. But at the end of the day it's really the kind of player you are. Standout and cut through like a knife (JB) or play your role and shine through like an angel descending from the good place.
498t has more low mids, better fits in mix, if you use it with tube screamer it give you chuggy tone with great resonance. Sh-4 great pickup for budget guitars, thats all) You can try Dimarzio ToneZone it is simillar to 498t but a little complex.
Such a great comparison..and your commentary is PERFECT. It removes the hype and gets to the point: for 150 bucks..where is the best way to spend my money. Often the marketing makes it's confusing..but your video clears away the fog. WELL DONE. Liked and subscribed.
EQ profiles are pretty similar (I’ve owned and played both in my same LP).....So of course they’re very similar. Currently have a Suhr Doug Aldrich in my LP.....but the 498T might make another appearance.....gonna hold on to it.
I have a Gibson SG and the sound of the pickups is warm and dynamic. I can't imagine swapping out the original Gibsons. I also have a good copy LP that I put Gibson pickups in. Those cost me a hundred quid, so my LP sounds like a Gibson for an expenditure of 350 sterling.
Yeah, I don’t understand what anyone is talking about. The JB seems to SMOKE the 498t. Adds darkness and character, squally energy. Love it. I’ve always meant to run a JB in something and now I will for sure. Lol
I guess I’ll just have to go down as “I couldn’t hear the difference” Maybe I could in person? But I mean, the very last example, I cannot hear a single change in tone. Regardless 498T is what I play and what I will stick with 👌🏻
I do think the 498T sounds better solo, and particularly in the moderate-gain examples. However, for distorted rhythm parts, it's hard to beat that "wash" of sound from the JB in my book. One of my favorite sounds to come from an electric guitar, period. [Refer to the part played at 2:30).
Hey dude, where can I get that same desk you have behind you? also. 498t is my all time favorite. played 57 classics for years then switched back to 498t. it might be because my first les paul had a 498t in it and its engrained in my mind. I do however like a 57 classic in the neck. I think that a couple pickups sound better to me then the 498t but the 498 feels better.
I think the JB's sound a little bit better, but I really don't prefer either set. I'll take a set of P90's or '59 PAFs and not sound like 90% of everyone out there.
The Jb is too treble heavy for me. I had it for about a year in my Les Paul Traditional (2012 model )and struggled every day to avoid an icepick sound. I had upgraded from the 57 classic which really didn't cut it for me. I ended up settling on the Slash seymour Duncans which have so much midrange growl and just the right amount of upper mids to cut through the mix. I also have a Les Paul studio (2002) model that has the stock 498T on it. I love that pickup so much and have never touched it and would never take it out of a guitar.
@@danielbarza8600 ah fair enough. I'm thinking about putting a JB in a jackson guitar I have but im a bit worried it will be too bright with the 500k pots I have in there.
With the cover off the Gibson I doubt there'd be any noticeable difference, apart from the JB''s slightly greater output. I've used SH4's for nearly 40 years in anything that would take them - currently a rebuilt early 80's JBJ in my 1990 Les Paul Studio and a late 80's JBJ in my 1996 Standard. I haven't bothered to change the neck pickups, just whipped the covers off. I've been thinking for some time that both the SH4 and the stock neck pickups are both too hot, and the stock bridge pickups would be too. My thoughts are veering towards a SD 78 at the bridge - about 9k and Alnico II as opposed to 16k and Alnico V for the SH4, matched with an SD Jazz at the neck. Tone, rather than power - after all, you can always add gain rather than use an overly powerful pickup to drive an amp - that's really old-school.
I had a LP studio some years ago with covered pickups, ended up removing the covers and cleaning the wax, made 498T a bit brighter and gave the guitar more bite. This is my favourite bridge pickup. I’m about to put one in a 2022 LP classic, and redo the whole electronics. I heard some people swap the A5 magnet for a ceramic one with interesting results, may try that in the future.
I dig what you're saying. It's better for soloing smoothly and elegant squealies but unless you put a ceramic magnet it's a bit overbearing for all around work.
Yes your right , do you still have the split coil ? i was thinking of changing my pickups and going with the 920D wiring and do away with the split coil , i don't use it ..never liked split coil ,what do you think ?
498T/R is as good as anything in the market. It can more than hold its own. And swapping is not an upgrade. You are not talking a 200bucks china made guitar here. It's a preference issue. But great vid!
I love the 498t. It's one of the best pickups out there in my opinion. And honesty, you switched pickups but you didn't necessarily upgrade because the 498t is about $100 by itself. It's not a cheap pick-up. It's a very good pickup. As a general rule, only change for pickup if I'm not satisfied with the one in there. I never do it blindly just because I want to see if one sounds better. You can throw away a lot of money that way.😊
Cool video. The 498T and the SD JB are very close. Me and my buddy AB'd them to death. The 498T is one of the best pickups ever made and I would take it over the JB any day. With that said, the SD JB is a great pickup also.
Dude you saved me like-3-500. I've been playing EMG for years, my favorite is the Hetset. Just bought an LP studio and I don't really like the Gibson pups but I think maybe it's just that I'm not used to them. Also the Duncan's sound awesome but I don't see paying for the negligible difference when a few eq tweaks could probably dial it in.
I did the same to my Les Paul black water, changed both pickups to Bare Knuckle Juggernaughts, loved them, but it was no longer a Les Paul, going back to stock pickups
Great video. I just got a Gibson tribute with the 490t/490r and control board thing. Swapped out for a 498t/490r with CTS pots and ditched the control board. Sounds amazing :)
Hello Simon. I also have a similar LP. Actually, NOW it's similar after some changes. It's a LP "Classic" in Ebony, you know, with the cream binding, cream plastics, zebra pickups and those ugly "kidney bean" tuners. I now have ALL the Gibson plastics in black, keystone buttons (like yours) and nickel pickup covers (to hide the zebra striped pickups...ugh). Anyhow I've yet to see another guitar like it till now. However, yours has a String Butler. I also thought of doing that. How are you liking that String Butler?
The 498T and the JB are two slightly different flavors of the same thing. The JB has a scooped mid, heavy bottom, and clear ringing top. Someone who does a lot of drop D or Gojira style octaves might really dig that. The 498T has a midrange bump and less top end. Someone who plays a lot of 80's hair metal or ols school Priest might really dig that midrange bump. You're hanging out in the midrange and you want a clear and unified chord tone. You don't want to hear just bass and high end. Depending on your style these subtle differences really shine through. If you play in a cover band and do a ton of different genres just stick with whatever you have.
Nice video man, I´m from Spain and It´s a bit difficult for me to understand everything, but IMHO the differences between those pickups (I have and SG with 498T) don´t deserve to spend more money changing them (I like a little bit more the JB by the way) because, at least to my ears, it doesn´t transmit me the need of such 100 euros (or dollars) pickup upgrade...my playing needs more investment!! (hours and hours!!). Good job making the video and hope the best for your channel (sorry if my english is a mess :(
Hey man, your response totally makes sense so don't worry! I agree, even though the JB sounds a bit better, the $100 upgrade is not really worth the money :)
I found that a Duncan Distortion gave me more of the sound and bite I wanted. That’s not to say I discarded the 498T; in fact, my daughter has an LP copy that is going to receive an upgrade with that pickup - easily increasing the guitar’s performance
I have a 2005 gibson lp standard that came with burstbuckers. It was so thin and generic sounding I almost returned the guitar. But then.... The mods happened. 498T in the bridge, 57 classic in the neck, vintage 1960s Black Beauty tone caps and a Kluson USA ABR-1 bridge with raw brass saddles. And now..... W O W ! ! ! It still looks stock as the pickups are both nickel covers but everyone who hears it is like damn bro, how do you get that sound?? Kinda sounds like Randy Rhoads and Slash at the same time.
Two great pickups. The 498T, I'm hearing more lower mids and less "snark" than the JB. I had no idea they were so close. Also I think if you spent the money, and it's even a little bit better to your ears, use the JB. Better is better, no matter how you slice it. I personally prefer the fatness of the 498T, the "snark" thing always seemed like an L.A. thing to me - not my bag; the JB is possibly the best pickup in the world for that. GOOD JOB!
Nice video...I'm with you...I have a 498 490 set in my Korean epiphone les paul custom ...it really has a gibson character...dont want to change them. My strat has hotrails and a 59jr and does a great job of heavy tones...just acquired a jb in a trade...might build a guitar around it as it is a top sounding pickup and worth loading into an axe...
Just bought another LP Studio, and am pleasantly surprised with the 498t. As you say, in a room it fills out sound well. I'll keep the 490 in the neck, but at some point will swap the bridge out for hot ceramic - even if it's a 500t. Probably will be a SD Nazgul
I have 490/498 on a custom build Fly V, and I like it although sometimes seems too bassy. But in this video with earplugs I couldn't hear a real difference.
I use both...they are very close indeed. I prefer the gibsons though...they have a little bit more bite and midrange scream, while the JB's sound a little bit more civil and scooped. 'bigger' if you will, but with less "wail". You can only really tell the difference when you play them yourself in front of the amp, it's so close all the differences kinda vanish on recording.
It comes down to what PRS is saying. It's not about the pickups, but the guitar, wood and what the strings are touching...nut, tuners, bridge. You can put whatever mic on Barbara Streissand but she'll never sound like Tom Jones.
In my own experience, I’ve liked the Jb more in an SG than a les Paul. I think the 498T cuts and has a little bit more top end that favors the thicker mahogany body of a LP. Conversely, a Jb has a bit more in the mid Range (seemingly) that to be, in my own experience, has sounded better in thinner guitars. The 498T is just right. I’ve tried 490s and 500s in Les Pauls and they just don’t do it for me. Great video. Both are great pickups
If you are into mods or don't mind getting your hands dirty, a popular mod is to swap the magnets from each pickup i.e. take the alnico 5 from the 490r in the neck and put it in the 498t in the bridge and use the alnico 2 from the bridge 498t and put it in the 490r. It gives the bridge a bit more cut and makes the neck a bit more classic creamy gibson type tone.
498T for sure! If I were gonna get a Seymour Duncan Pickup, A JB(jazz blues not jeff beck) would be almost last if not last on my list. It would probably be right above or below SD blackouts. Only cuz I hate active pickups. I do have a SD Nazgul in my one guitar and I like it. Def has good definition and clarity. I only bought it cuz it was a steal I found on my local Craigslist. I prefer Dimarzio’s mostly. Really though if it sounds good to you then it is good, right?!
I like 498Ts, but I find Gibson as a company way too inconsistent about everything, including the quality of their pickups and matched characteristics to the guitars in which they're installed. The reason I love the JB is because of its incredible consistency. Yes, the JB sounds better in some guitars than others, but it's very consistent. Duncan as a company stakes their name on the quality and consistency of pickups. Gibson as a company is not focused enough on making quality Gibson guitars. They also have several other brands under their umbrella. I wouldn't care if they had a consistently high level of quality like PRS and fairer prices, but they don't.
i have the 490/498 pickups in my CS Les Paul Custom. The 498 is just hot and sharp for my taste. I'm going to put a set of Slash 2.0 in the guitar and hope that solves it.
in the last 'band' example i figured i like the JB more in a band context. cuts better to me, but well, think its a matter of taste and if you wouldnt listen back to back you wouldnt notice too much of a difference :) , both will get the job more than done
I've always thought the the 498T and the JB sounded really similar and this further confirms it. IMO it's not really worth the upgrade. You can say what you want about their guitars, but I think it's safe to say that Gibson knows how to make a humbucker.
If you want to drastically change the voicing of your guitar, you need to change the space between the bridge and the P.U. Results may vary though. It is as drastical as picking/strumming near the bridge or closer to/on the fretboard. My personal point of view is that changing the same type of P.U. for another doesn't have enough effect to justify the purchase and bother doing the mod.
Ive played a 498t/490r combo in an sg for 25 years. To this day it is still one of my favorite pickup sets. Articulate and well rounded. Blues, classic rock, indie, or metal. They do it all. I appreciated the honesty in your video. Good job man.
i like the 490t too for that reason. any feedback on the 500 ceramic?
@@gibs8412 The 500t isn't as versatile as the 498t. The 500t has a bit more high end bite and output (HOT). It is a firebreather of a pickup for heavier tones. I have a set in my Explorer and Les Paul. They fit my style of playing. Some think they are harsh but to me it depends on the application. For metal tones, I prefer them to lots of other pickups.
@@michaelglass3993 I got the 496/ 500 set in my Paul. Honestly I couldn't really tell the difference between these. My main guitar is a L Sensor Strat. So my amps are sorta set up for this guitar. Les Paul just smokes whatever I plug into. It's loud so I lean on it that way. Sounds so good through my Boogie.
Same here. Love the 498/490 combo and I play classic rock, hard rock and 80's metal. Works fantastic.
I didn't hear a difference, given I'm hearing this on my phone. After using SH4's for nearly 40 years - I have them on a Studio and Standard from 1990 and 1996 respectively, a rebuilt early 80's JBJ in the Studio and a late 80's JBJ in the Standard, my guess is you'd really not hear a difference in the room that mattered if you took the covers off the stock Gibsons.
The 498T has got to be one of the most underrated pickups out there. People think they are cheap because they are in Gibson's less expensive guitars (like Les Paul Studios) but they kick ass.
Nope..les paul custom use 498T too
Absolutely not the case. They are criminally underrated. I have a 2008 Gibson Les Paul Studio. It chugs like a mf.
I have the original Patent NO. T top P/ups in my 73 Les Paul Custom, and I would no more change them, than I would change my 498 T and 490 R in my 2005 SG Standard. If anything make sure you have 500k pots because that well make a big difference in how your pickups sound.
They are also in the LP customs models.
They come in les paul customs also
You gotta remember though, Gibson puts the 490r/498t in their Les Paul Customs for 4-5 grand, so that combo is pretty iconic
498t is my favorite bridge pickup ever ❤
Yeah exactly! And they once decided they were an considerable upgrade over T-Tops and the Original PAFs.
@@jesterjigs9914I just put a 498t/490r set in my Epi Jerry Cantrell wino LP Custom and they are absolutely amazing. Wouldn't use anything else, and I have tried a lot of different pups over the years and always came back.
I put a JB in my Les Paul and TBH I think it was a waste of money, the difference in tone doesn't justify the cost, the 498t was a good pickup already.
I agree, I bought a duncan JB to put in a Jackson Dinky and it is still sitting in the box on a shelf. After scouring some comparison video's the stock jackson high output humbuckers sound every bit as good as the JB. I will save it for a future Ibanez, they have horrible stock pickups and I always change them out.
I completely agree. The JB has a slight more clarity/definition, but if you take the cover off the 498T, it would sound much like the JB for no extra expense.
took out the 498t's for the JB's after a week I put back the 498's. I have a 1999 Gibson Les Paul Standard. The JB's lacked low end. I paid $50 to have it put in, but I took them out myself. This is an excellent video comparing both. . Good job!
This is exactly the problem I had with the JB. The low end is weak, yet loud
I think that, if you’re thinking of spending money on changing pickups, you should pick the replacement based on sound, not on reputation. If the pickup you have already does the job you want, then there’s no need to change, but if it doesn’t give you the sound you want, then it can be worth buying something different. Like going from low-output A2 humbuckers to high-output ceramics is probably more worthwhile than just paying money for slightly different low-output A2s.
Also, if you can buy used, and sell the ones you take out, it’s better value than buying new pickups and keeping the originals in a drawer (obviously).
I have Les Pauls with both and have played both extensively in live and studio settings.
The JB is a great pickup for live stuff because it’s really hot but also very stable (more on that in a sec), so it sounds good through a variety of amps and can often get enough gain even on its own unless you need a lot. But despite the high output, it’s also dead quiet (this is the “stable” part). I play a 50w Marshall and have zero feedback problems. It never squeals. 100% controllable.
That said, the 498T produces better tone, IMO. It’s just a lot more balanced and with a wider range; the JB is a lot boxier by comparison. And I’ve found this to be especially apparent in the studio. Not to say that you can’t get good tones out of the JB in a studio setting, but I’ve consistently found that my guitars with 498ts always sound better.
So the JB is the layup; it’s great live and it will sound good in a wide variety of situations. But it loses some range in achieving that amazing balance and consistency, and that range is what the 498t has.
498T all the way. I keep all my Gibsons and Epiphones running Gibson pickups.
Agreed
Great video. To my ear, the 498T was warmer and fuller; I preferred it in all samples except the heavy distortion, where I felt the highs of the JB cut through clearer. As I'm not a high distortion player, 498T would be my choice.
(Thanks. This is now a change I don't need to do with my Gibson, I was contemplating JB swap, but your test as shown me I prefer the stock - cheers!)
Great video mate , yeah that’s why we play Gibson coz we want that classic Gibson sound that most recording such as sabbath , kiss , zeppelin , etc etc used to make classic sounding songs , yeah a jb would be nice in a Jackson or Ibanez but I like to keep my Gibbo standard , I’m partial to dirty finger pickups also .
Great video! I’ve always been partial to Gibson pickups in Gibson guitars. To me they just work together so well
Hey thanks Simon you really answered my question. I have a Les Paul Standard with a Burstbucker 61R in the neck which is stock and a JB in the Bridge. I also have a Les Paul Classic that came with the Burstbuckers 61R and 61T stock but I'm putting a Gibson 498T in the bridge of the Gibson Les Paul Classic. And as for gigs, I'm 54 so I don't really have any high hopes past the usual small bar gig, but dude you're way younger and I hope you really have an amazing experience as a musician, just go for it and never give up. Thanks and take care. Mike.
There's one major component that was overlooked here and that's the covered pickup versus uncovered pickup aspect of this comparison. The JB does sound crisper, more present and more raucous in this demonstration compared to the 498t, but I bet if you were to compare an open coil 498t to the same JB in this video the differences would start to get narrower and narrower very quickly. To my ears, the JB was a little bit more to my taste here, but the 498t is still a solid pickup and if I bought a Gibbo that came with one stock I'd leave it in.
There's also a difference in magnet type and strength, pickup height, and adjusting pole slugs one string at a time that can change the sound of a pickup, along with pots and caps. I had a set of 57's, a Classic and a Plus I put in an epiphone and always hated them, until I adjusted the height and changed out the caps, now they sound incredible. I did the height adjustment on my 79 Standard and those 490 and 498 combo sing.
I think they sound very similar and with this I wouldn't change one for the other! I prefer the 498t. I had one in an SG and love it. It has more of an open/sizerling tone and more p.a.f.
They're very close. With gain they sound practically identical. Clean the JB is a bit brighter (less muddy), but the difference is marginal.
Sizerling?
Honestly I've had both and they both sound great it all depends on your taste but even the covers make a difference if you have covers on the 498T I would remove the pickup covers and it actually makes it sound a bit better to my ears.
I have two Gibson Les Paul Studio's one has a 498T in the Bridge and the one I got for Xmas has the 490t and honestly 498T is. A WAY better sounding pickup vs the 490t. The 498 definitely seems to cut thru better.
So IMO the JB is probably the greatest pup you’ll find to replace any pup you don’t like. But would never consider replacing the 498 set with anything at all. I’ve had a less Paul studio that I’ve had for 25 years back in my younger days. I went through the pick up stage thinking I could make it sound better and going through about 10 different sets of very expensive pick ups I always ended up going back to the original set and still to this day have it. Nothing was able to beat them.
Agree - Great video. I love the 490R and 498T combination vs Seymour Duncan JBs, to me they just seem more dynamic and versatile across the rock/blues spectrum.
Seymour Duncans seem to have pretty strong magnets. When I swapped all my SD Pickups with rough cast magnets I liked them all better.
That's a great tone. I'm interested to know you signal chain, amp, and settings.
Thanks! At the time I believe I was using the STL Tonehub Plugin, with the John Feldmann pack. Probably the "Ink" preset.
Good comparision, gives a good idea of the difference, The way you amp them and settings. 498T better than I thought.
in the clean strumming it seemed like the 498t had more of a dynamic range and was peaking more on the harder strums, whereas the JB was more controlled and uniform. At least in this comparison.
That is the case
Both sound really good. You can never go wrong with a JB!
Btw.... Nice string butler! I love those things!!
Gibson studio is my favorite guitar in the world.... love it
I have a framus Xg D series where the previous owner had swapped the stock jb with a 498T. I was fuming it wasn’t mentioned, until I plugged the guitar in and played it. 498T is a solid sounding pickup
I swapped out the 498's that were in the Epi Les Paul Standard I traded for some Duncan 59's because I didn't like how dark they were. I always buy used pick ups so I don't spend a bunch of money on upgrades but I do get quality stuff, I also have a Dimarzio Super Distortion from an Epiphone SG I had and I might try it in my Les Paul
Nice video. I have a LP Std that I swapped burstbucker pros out for 59/JB and I’m glad I did. I have a 2019 SG that came with 490R/490T and I swapped that 490T out for a 498T which sounds great. Glad I did that for what I play. Still debate if I should put a JB in that as well....
This is great, thanks a lot!
There is a hair more treble response from the JB, definitely. I’m leaning towards the 498T though, especially in my bright-sounding koa top Les Paul Custom.
Again, thanks. This is just what I needed.
Have you tried the Super Distortion?
I have definitely been curious to try a super distortion! They look super cool as well :)
498 has character like no others. My 99 SG has 498/490 and never felt the need to change them.
Smart video and a good point. Im a huge fan of the jb , but the gibbie was real close, so you do have to think about cost vs reward. I got an old strat that was hotrodded with a duncan invader in bridge. The invader was too aggressive for me, so i went to a repair buddy and he offered a jb as a trade. Well yea that was perfect for me, and didnt have to buy it. Too many just want to swap pups out instead of workin em. Alot of people dont like hilo trons from gretsch.(low voltage) i love em, its relative cause if you put amp behind them, they scream. Cool video, thanks!
I prefer the JB, brighter and more versatile.
This is a great video. I have Duncans on my Japanese Les Pauls and 498s on my Studioand i love it both. Duncans are more clearer and has more presence on it, while the 498 is more airy and has this "open" sound. It all depends on what is your style and need.
exactly what I ear from Gibson pickups in general, there's no specific focus no matter what magnet is used. Maybe not what I would use for parts which requires a lot of articulation (i.e. progressive metal), still, these pickups are very versatile
For the cleans I prefer the JB, but there's something in the distorted character of the 498t that is clearer and more pleasant sounding.
I agree, I think just in the case of Gibson guitars, the 498T sounds really natural and like it was made to go in a Les Paul. Whereas JB is just an overall go-to for most other brands of guitars when thinking of upgrades etc
Great objective and educational video, thanks for doing this comparison for all us newbies. Your playing was great and the fact that you wrote it, is most impressive. I personally thought the JB sounded quite a bit better to my ear, more clear and pronounced, less fuzzie (probably not professional guitar language, but that is what I hear). That said, I can appreciate your points and logic to putting it back stock. Either way it's fun to tinker/experiment with stuff.
loving the binding! I want to do this to my studio
wow this review got so real, so fast! nice lol :D definitely an audible difference - much more clarity in the JB
I bought that shirt at the gig when I saw them at he Monsters of Rock Tour in 1988. I also met Kirk at the airport once when my wife was on the same plane as him. Short guy, long hair.
Late to the game. I preferred the 498T on the heavier rhythm stuff and the JB on the lead parts. 498T sound more balanced overall. It got harsh, but not overly harsh. Perfect for standard rock stuff and using for studio stuff. The JB is a beast and will cut through most and, as you said, good for a live setting if you're into that. But at the end of the day it's really the kind of player you are. Standout and cut through like a knife (JB) or play your role and shine through like an angel descending from the good place.
498t has more low mids, better fits in mix, if you use it with tube screamer it give you chuggy tone with great resonance. Sh-4 great pickup for budget guitars, thats all) You can try Dimarzio ToneZone it is simillar to 498t but a little complex.
Such a great comparison..and your commentary is PERFECT. It removes the hype and gets to the point: for 150 bucks..where is the best way to spend my money. Often the marketing makes it's confusing..but your video clears away the fog. WELL DONE. Liked and subscribed.
EQ profiles are pretty similar (I’ve owned and played both in my same LP).....So of course they’re very similar. Currently have a Suhr Doug Aldrich in my LP.....but the 498T might make another appearance.....gonna hold on to it.
yeah I was surprised how similar the two pickups were!
Great video and comparison. The isolated guitar track at the end was worth doing. The 498t sounded better for my tastes.
I have a Gibson SG and the sound of the pickups is warm and dynamic.
I can't imagine swapping out the original Gibsons.
I also have a good copy LP that I put Gibson pickups in.
Those cost me a hundred quid, so my LP sounds like a Gibson
for an expenditure of 350 sterling.
ironically this video sold me on the jb lmfao
Whew! Me too, thought I was the only one.
Yeah, I don’t understand what anyone is talking about. The JB seems to SMOKE the 498t. Adds darkness and character, squally energy. Love it. I’ve always meant to run a JB in something and now I will for sure. Lol
Me too!
jbs are for rocking , the 498t are for cleaner crunchy sound ,, that you can also achieve with the JBs so :D
seymour it is
I guess I’ll just have to go down as “I couldn’t hear the difference”
Maybe I could in person? But I mean, the very last example, I cannot hear a single change in tone. Regardless 498T is what I play and what I will stick with 👌🏻
geez they're pretty close. both sound great. JB has the slightest amount of extra/more open high end. very helpful video. cheers
Thanks man! Yeah I agree completely :)
Perhaps it’s the cover which removes some of the high.
@@rschua7 that's exactly what I thought too.
I do think the 498T sounds better solo, and particularly in the moderate-gain examples. However, for distorted rhythm parts, it's hard to beat that "wash" of sound from the JB in my book. One of my favorite sounds to come from an electric guitar, period. [Refer to the part played at 2:30).
Hey dude, where can I get that same desk you have behind you? also. 498t is my all time favorite. played 57 classics for years then switched back to 498t. it might be because my first les paul had a 498t in it and its engrained in my mind. I do however like a 57 classic in the neck. I think that a couple pickups sound better to me then the 498t but the 498 feels better.
Hey man! It’s a yorkville studio desk, it’s a Canadian brand (I live in canada)
I think the JB's sound a little bit better, but I really don't prefer either set. I'll take a set of P90's or '59 PAFs and not sound like 90% of everyone out there.
The Jb is too treble heavy for me. I had it for about a year in my Les Paul Traditional (2012 model )and struggled every day to avoid an icepick sound.
I had upgraded from the 57 classic which really didn't cut it for me. I ended up settling on the Slash seymour Duncans which have so much midrange growl and just the right amount of upper mids to cut through the mix. I also have a Les Paul studio (2002) model that has the stock 498T on it. I love that pickup so much and have never touched it and would never take it out of a guitar.
Did you try using the tone knob on your guitar?
@@matt926uk1 For sure, the tone knob worked to remove treble, but I prefer a pickup that sounds good with all the knobs up all the way.
@@danielbarza8600 ah fair enough. I'm thinking about putting a JB in a jackson guitar I have but im a bit worried it will be too bright with the 500k pots I have in there.
With the cover off the Gibson I doubt there'd be any noticeable difference, apart from the JB''s slightly greater output. I've used SH4's for nearly 40 years in anything that would take them - currently a rebuilt early 80's JBJ in my 1990 Les Paul Studio and a late 80's JBJ in my 1996 Standard. I haven't bothered to change the neck pickups, just whipped the covers off.
I've been thinking for some time that both the SH4 and the stock neck pickups are both too hot, and the stock bridge pickups would be too. My thoughts are veering towards a SD 78 at the bridge - about 9k and Alnico II as opposed to 16k and Alnico V for the SH4, matched with an SD Jazz at the neck. Tone, rather than power - after all, you can always add gain rather than use an overly powerful pickup to drive an amp - that's really old-school.
I had a LP studio some years ago with covered pickups, ended up removing the covers and cleaning the wax, made 498T a bit brighter and gave the guitar more bite. This is my favourite bridge pickup. I’m about to put one in a 2022 LP classic, and redo the whole electronics.
I heard some people swap the A5 magnet for a ceramic one with interesting results, may try that in the future.
I preferred the JB. It has a sweetness many others lack.
I dig what you're saying. It's better for soloing smoothly and elegant squealies but unless you put a ceramic magnet it's a bit overbearing for all around work.
@@andreil1234 A JB with a ceramic magnet is a Duncan Distortion.
@@andreil1234I prefer the DiMarzio Super Distortion bridge pickup nowadays. It's pretty versatile.
Yes your right , do you still have the split coil ? i was thinking of changing my pickups and going with the 920D wiring and do away with the split coil , i don't use it ..never liked split coil ,what do you think ?
I don’t think split coil humbuckers are great, I’d much rather just have a dedicate strat or tele for that job
498T/R is as good as anything in the market. It can more than hold its own. And swapping is not an upgrade. You are not talking a 200bucks china made guitar here. It's a preference issue. But great vid!
The clarity of the JB compared to the 498T is better
You can't trade a $150.00 pickup for a $150.00 pickup and call it an upgrade.
Yeah, it’s definitely just a crossgrade....something you do if you’re looking to massage a little more treble/midrange/presence/etc. into the guitar.
It’s an upgrade based on usage not just price. I love both pickups personally
Typically a JB goes for $90
great demo, appreciate the effort! both cool pickups.
I love that stock combo. Got a lot of pickup mods, Dimarzio and SD but those are staying in that guitar too
I love the 498t. It's one of the best pickups out there in my opinion. And honesty, you switched pickups but you didn't necessarily upgrade because the 498t is about $100 by itself. It's not a cheap pick-up. It's a very good pickup. As a general rule, only change for pickup if I'm not satisfied with the one in there. I never do it blindly just because I want to see if one sounds better. You can throw away a lot of money that way.😊
i like the 498
Cool video. The 498T and the SD JB are very close. Me and my buddy AB'd them to death. The 498T is one of the best pickups ever made and I would take it over the JB any day. With that said, the SD JB is a great pickup also.
Nothing beats the Gibson pickups except another Gibson pickup
Dude you saved me like-3-500. I've been playing EMG for years, my favorite is the Hetset. Just bought an LP studio and I don't really like the Gibson pups but I think maybe it's just that I'm not used to them. Also the Duncan's sound awesome but I don't see paying for the negligible difference when a few eq tweaks could probably dial it in.
I did the same to my Les Paul black water, changed both pickups to Bare Knuckle Juggernaughts, loved them, but it was no longer a Les Paul, going back to stock pickups
Honestly the 498 sounded great and the JB might be a bit brittle. I had the 498 for about twenty years until I switched from Gibson to Ibanez.
Well done! I’ve got both. You made some great points concerning their usage, and their frequency spectrum. Thanks again! Subscribed!
I have a jb in my lp LP custom but with that I'll say the 490 t is still a great pick up
He is talking about 498T
Have a 59/JB in my Les Paul and a 490/498 in my SG. Love them both!
Great video. I just got a Gibson tribute with the 490t/490r and control board thing. Swapped out for a 498t/490r with CTS pots and ditched the control board. Sounds amazing :)
I prefer the 498t, but that JB did sound a little better in the mix, not by much though.
Hello Simon. I also have a similar LP. Actually, NOW it's similar after some changes. It's a LP "Classic" in Ebony, you know, with the cream binding, cream plastics, zebra pickups and those ugly "kidney bean" tuners. I now have ALL the Gibson plastics in black, keystone buttons (like yours) and nickel pickup covers (to hide the zebra striped pickups...ugh). Anyhow I've yet to see another guitar like it till now. However, yours has a String Butler. I also thought of doing that. How are you liking that String Butler?
The 498T and the JB are two slightly different flavors of the same thing. The JB has a scooped mid, heavy bottom, and clear ringing top. Someone who does a lot of drop D or Gojira style octaves might really dig that. The 498T has a midrange bump and less top end. Someone who plays a lot of 80's hair metal or ols school Priest might really dig that midrange bump. You're hanging out in the midrange and you want a clear and unified chord tone. You don't want to hear just bass and high end. Depending on your style these subtle differences really shine through. If you play in a cover band and do a ton of different genres just stick with whatever you have.
Nice video man, I´m from Spain and It´s a bit difficult for me to understand everything, but IMHO the differences between those pickups (I have and SG with 498T) don´t deserve to spend more money changing them (I like a little bit more the JB by the way) because, at least to my ears, it doesn´t transmit me the need of such 100 euros (or dollars) pickup upgrade...my playing needs more investment!! (hours and hours!!). Good job making the video and hope the best for your channel (sorry if my english is a mess :(
Hey man, your response totally makes sense so don't worry! I agree, even though the JB sounds a bit better, the $100 upgrade is not really worth the money :)
Bien hecho, de acuerdo!
I found that a Duncan Distortion gave me more of the sound and bite I wanted. That’s not to say I discarded the 498T; in fact, my daughter has an LP copy that is going to receive an upgrade with that pickup - easily increasing the guitar’s performance
Love seymour duncans but i have grown to love gibson pickups in my gibsons
I have a 2005 gibson lp standard that came with burstbuckers. It was so thin and generic sounding I almost returned the guitar. But then.... The mods happened. 498T in the bridge, 57 classic in the neck, vintage 1960s Black Beauty tone caps and a Kluson USA ABR-1 bridge with raw brass saddles. And now..... W O W ! ! ! It still looks stock as the pickups are both nickel covers but everyone who hears it is like damn bro, how do you get that sound?? Kinda sounds like Randy Rhoads and Slash at the same time.
Two great pickups. The 498T, I'm hearing more lower mids and less "snark" than the JB. I had no idea they were so close. Also I think if you spent the money, and it's even a little bit better to your ears, use the JB. Better is better, no matter how you slice it. I personally prefer the fatness of the 498T, the "snark" thing always seemed like an L.A. thing to me - not my bag; the JB is possibly the best pickup in the world for that. GOOD JOB!
Nice video...I'm with you...I have a 498 490 set in my Korean epiphone les paul custom ...it really has a gibson character...dont want to change them. My strat has hotrails and a 59jr and does a great job of heavy tones...just acquired a jb in a trade...might build a guitar around it as it is a top sounding pickup and worth loading into an axe...
Yeah the JB is definitely a easy choice for building any guitar with some solid driven tones, it's hard to make it sound bad in any guitar 😂
Just bought another LP Studio, and am pleasantly surprised with the 498t. As you say, in a room it fills out sound well.
I'll keep the 490 in the neck, but at some point will swap the bridge out for hot ceramic - even if it's a 500t. Probably will be a SD Nazgul
I have 490/498 on a custom build Fly V, and I like it although sometimes seems too bassy. But in this video with earplugs I couldn't hear a real difference.
the jb was better, more present. how did you get the studio to look like a les paul custom with an sg special neck?
I use both...they are very close indeed. I prefer the gibsons though...they have a little bit more bite and midrange scream, while the JB's sound a little bit more civil and scooped. 'bigger' if you will, but with less "wail". You can only really tell the difference when you play them yourself in front of the amp, it's so close all the differences kinda vanish on recording.
It comes down to what PRS is saying. It's not about the pickups, but the guitar, wood and what the strings are touching...nut, tuners, bridge. You can put whatever mic on Barbara Streissand but she'll never sound like Tom Jones.
good point
Should I replace my Duncan Designeds with jb?
It would definitely be an improvement, if you can find a used one for a good price I'd definitely recommend it
In my own experience, I’ve liked the Jb more in an SG than a les Paul. I think the 498T cuts and has a little bit more top end that favors the thicker mahogany body of a LP. Conversely, a Jb has a bit more in the mid Range (seemingly) that to be, in my own experience, has sounded better in thinner guitars.
The 498T is just right. I’ve tried 490s and 500s in Les Pauls and they just don’t do it for me.
Great video. Both are great pickups
I've a Fender HH strat that I'm planning to put upgrade with the Gibson 498T/490R combo. It'll become a Fibson
If you are into mods or don't mind getting your hands dirty, a popular mod is to swap the magnets from each pickup i.e. take the alnico 5 from the 490r in the neck and put it in the 498t in the bridge and use the alnico 2 from the bridge 498t and put it in the 490r. It gives the bridge a bit more cut and makes the neck a bit more classic creamy gibson type tone.
You got it backwards. 490 has Al 2 and 498 has Al 5
498T for sure! If I were gonna get a Seymour Duncan Pickup, A JB(jazz blues not jeff beck) would be almost last if not last on my list. It would probably be right above or below SD blackouts. Only cuz I hate active pickups. I do have a SD Nazgul in my one guitar and I like it. Def has good definition and clarity. I only bought it cuz it was a steal I found on my local Craigslist. I prefer Dimarzio’s mostly. Really though if it sounds good to you then it is good, right?!
I like 498Ts, but I find Gibson as a company way too inconsistent about everything, including the quality of their pickups and matched characteristics to the guitars in which they're installed. The reason I love the JB is because of its incredible consistency. Yes, the JB sounds better in some guitars than others, but it's very consistent. Duncan as a company stakes their name on the quality and consistency of pickups. Gibson as a company is not focused enough on making quality Gibson guitars. They also have several other brands under their umbrella. I wouldn't care if they had a consistently high level of quality like PRS and fairer prices, but they don't.
JB sounds like a guitar playing through a tiny radio. Gibson´s sounds like a live guitar in the same room.
i have the 490/498 pickups in my CS Les Paul Custom. The 498 is just hot and sharp for my taste. I'm going to put a set of Slash 2.0 in the guitar and hope that solves it.
in the last 'band' example i figured i like the JB more in a band context. cuts better to me, but well, think its a matter of taste and if you wouldnt listen back to back you wouldnt notice too much of a difference :) , both will get the job more than done
I'm not too picky, but I would not change my 498t for a JB. The difference is way to minimal to waste money.
Exactly!
I've always thought the the 498T and the JB sounded really similar and this further confirms it. IMO it's not really worth the upgrade. You can say what you want about their guitars, but I think it's safe to say that Gibson knows how to make a humbucker.
Do you remember what preset on the Feldman pack you used?
probably "Ink"
If you want to drastically change the voicing of your guitar, you need to change the space between the bridge and the P.U.
Results may vary though.
It is as drastical as picking/strumming near the bridge or closer to/on the fretboard.
My personal point of view is that changing the same type of P.U. for another doesn't have enough effect to justify the purchase and bother doing the mod.
That Gibson 498 T compressed mid range is total 💘💝💖💗💓❤💯💪👍
Hello bro! Can you tell me what afination/tuning are you using? Thanks
i think in this video it was either drop D or drop C#
@@simonaustin1136 Thanks!!