I noticed the support you pulled out of the main part of the revolver came out smooth and it one large almost ribbon like piece. I’m new to 3D printing, and was wondering if you could tell me how you did that
Modeling the thing from scratch instead of downloading a model from the internet is truly the ultimate chad move. Or is there some 3d printing related reason to do this?
love how you did this cause i just got into playing rdr2 for the second time like 2 days ago. You should make the volcanic revolver next! its my favorite
In the time and money it took to make this you probably could have just bought an old colt 44 lol. But this is still wickedly awsome and probably a lot more legal to take places
well i own a colt 45 also known as a colt single action army and let me tell ya it wasn't cheap joker cost me 530+ $$$ and ammo is not cheap either so agepbiz you went the wise route with this 3d printing it
I know this is a joke (so dont r/woooosh me) but i just wanna compare that a 3d printer costs usually 250 dollars and then if you add the filament which is usually 40 dollars, so then if you add them up which is almost 300 dollars. but a real cattleman colt .45 revolver is mostly 600 dollars
That is a remarkable print quality you can barely see the layers? I have to ask, do you end up sanding or filing before you insert joining studs or do they connect straight off the print bed?
What kind of 3D printer you’re using. Would a Ender 3 V2 be able to make this kind or model. And what kind of software/website you use to construct the image?
This was printed on an old Ender 3 so an Ender 3 V2 sure would be able to print it. I manually 3d modelled the files doing polygonmodeling in Autodesk 3ds Max
Thanks! It is indeed Marmoset 🙂 Timeconsuming manual process though, saved out files after every major update, loaded them into marmoset and keyframed their visibility
agepbiz Oof! Was hoping something like that wasn’t the answer :) I have seen the time lapse done before and have always been curious. Thanks for the reply.
This has frustrated always perplexed me. How long is the barrel of the Cattleman in RDR2? I guessed 5.5 inches, but the grip looks too big compared to the SAA clone I have.
Curious about what slicer you're using? I recently got a creality printer, been playing around in cura and prusa slicers but since I'm still quite new to 3d printing I don't know what's best for creality, recommendations would be awesome
I keep trying it print this, I have doing mainly the barrel since it was first on te list on Thingiverse but everytime I print it with supports and a raft on the AnkerMake m5c it just keeps breaking, the barrel goes about half way then just falls over and breaks any suggestions on what to do. Also you did a fantastic job on this model
@@agepbiz thank you, I just got into this recently so I have been quite confused on all of this lol, I will give that a try to see of it will work for me
Guys, if someone printed this, what are all the sizes of the screw u need to use? Ik that the video shows M2x5 but what its the length? Pretty good model i prettend printing it when i get a 3d printer
Unfortunately I dont sell them, but I have made the 3d printable files available for free, so if you have access to a 3d printer you can 3d print yourself one 🙂
In one night watch all your videos, your work is incredible, congratulations and greetings from México
Thank you!
Just needs some paint and weathering to complete the look. Amazing work, as always. Also, I love the way you edited the video. :D
I am printing this right now and such a great model, thank you for sharing your hard work, very happy with this.
Incredible my guy! For sure printing one. Modeling skill is off the charts.
Taking apart the excess parts is so satisfying.
Love this! I am once again in awe!
I noticed the support you pulled out of the main part of the revolver came out smooth and it one large almost ribbon like piece. I’m new to 3D printing, and was wondering if you could tell me how you did that
Change the support density to be way lower, programs like Cura set it crazy high
Like how you did the assembly.
Wow you're so cool with those epic transitions and attitude
You are the best youtuber ever,thanks for the content
Modeling the thing from scratch instead of downloading a model from the internet is truly the ultimate chad move. Or is there some 3d printing related reason to do this?
Love this content! please continue making more
You should make a Schofield revolver next 🔥🔥🔥
Once I get my printer going I'mma make it look like the man with no name's revolver
Beautiful work. I'd love to make this one day. Is this 1:1 scale to the real gun?
Beautiful, would love to see you do a 1911...! Or better yet, the clear 1911 from “X-Men: Days of Future Past”
That would actually be a really cool application of 3D printing.
love how you did this cause i just got into playing rdr2 for the second time like 2 days ago. You should make the volcanic revolver next! its my favorite
Awesome! You deserve MORE subscribers
Nice build. Do you think you would ever make any other replica fire arms? Like The M1911 or P08 Luger
This is honestly amazing.
Oh hey ya noticed, Clone wars helmet when? Phase one or two.
Sweet! Nice design with killer detail! :-)
Really cool!!!
Wow, it's looks so great !
You're making so good content
Thank you!
Looks nice! Good job!
Hey bro love your content!
Thank you!
You should make the Schofield
Love the build awesome
Great tutorial. I gotta print this out
Master of transitions
In the time and money it took to make this you probably could have just bought an old colt 44 lol. But this is still wickedly awsome and probably a lot more legal to take places
Or a Cattleman.
.45, more like
Actually it is a 45
well i own a colt 45 also known as a colt single action army and let me tell ya it wasn't cheap joker cost me 530+ $$$ and ammo is not cheap either so agepbiz you went the wise route with this 3d printing it
I know this is a joke (so dont r/woooosh me) but i just wanna compare that a 3d printer costs usually 250 dollars and then if you add the filament which is usually 40 dollars, so then if you add them up which is almost 300 dollars. but a real cattleman colt .45 revolver is mostly 600 dollars
Legit!
You probably have a 3D object factory!
Its a general question but whats the best software to get easy removable supports like that?
Pretty damn clean
Your profil is amazing ? Is Cura ? Possible share ?
Thanks ! Good job !
Does the Slide Eject actually work or is it fixed in place?
Why is this so satisfying
That is a remarkable print quality you can barely see the layers? I have to ask, do you end up sanding or filing before you insert joining studs or do they connect straight off the print bed?
I'll pay gold for this model
What kind of 3D printer you’re using. Would a Ender 3 V2 be able to make this kind or model. And what kind of software/website you use to construct the image?
This was printed on an old Ender 3 so an Ender 3 V2 sure would be able to print it. I manually 3d modelled the files doing polygonmodeling in Autodesk 3ds Max
@@agepbiz what about a voxelab Aquila work as well?
Looks great!!! Curious, how are you doing the modeling time lapse? The shot right after the 3ds max bit... looks like Marmoset toolbag.
Thanks! It is indeed Marmoset 🙂 Timeconsuming manual process though, saved out files after every major update, loaded them into marmoset and keyframed their visibility
agepbiz Oof! Was hoping something like that wasn’t the answer :) I have seen the time lapse done before and have always been curious. Thanks for the reply.
This has frustrated always perplexed me. How long is the barrel of the Cattleman in RDR2? I guessed 5.5 inches, but the grip looks too big compared to the SAA clone I have.
Cool
Very creative good job ma brother
can you make john's cattleman revolver? the bone grip and worn black finish would look badass especially for a cospay or haloween
I love your videos! My kids love them as well. My kids keep asking if you could make a large Lego sonic.
Curious about what slicer you're using? I recently got a creality printer, been playing around in cura and prusa slicers but since I'm still quite new to 3d printing I don't know what's best for creality, recommendations would be awesome
I mainly use Simplify3D and have had great experiences slicing for my Creality machines. But S3D is expensive though
the rhoads gunsmith has a guy locked in the basement wtf
Hey man, could you please please tell me what slice software you use for your prints, or at the very least how you got those amazing supports
I think I used Simplyfy3D on that project if I remember correctly. I mainly use PrusaSlicer these days
@@agepbiz Thank you so much!!!
That’s awesome! How long did it take you to model it?
Thanks. Not sure, I modeled it over a period of several weeks. An hour now and then
How did his pieces go in so smoothly I almost broke mine getting the cylinder pin back out because I forgot to put the gate on.
how much suport infil did you put and what kind?
i like how you said i want it and it uperse
I love your works and I know how to model it in computer, its hard work. Sending my ❤️ from Turkey
Thank you!
Wow! Cooooool
Great Thanks for sharing this it's great!!!!
I keep trying it print this, I have doing mainly the barrel since it was first on te list on Thingiverse but everytime I print it with supports and a raft on the AnkerMake m5c it just keeps breaking, the barrel goes about half way then just falls over and breaks any suggestions on what to do. Also you did a fantastic job on this model
Thank you! Try replacing the raft with a big brim. Also slower speed might help?
@@agepbiz thank you, I just got into this recently so I have been quite confused on all of this lol, I will give that a try to see of it will work for me
Is there something I could replace the screw with?
How long are the screws?
"I WANT IT"
Why no bullets
Or did he not have time to
Like how you did that Star Wars Blaster you could do it like a Lego Minecraft pickaxe for like a sword!!!
Hello from Russia. It's a great model, maybe I'll take it into service.
Guys, if someone printed this, what are all the sizes of the screw u need to use? Ik that the video shows M2x5 but what its the length? Pretty good model i prettend printing it when i get a 3d printer
Do you sell those? I would very much like to buy it
Unfortunately I dont sell them, but I have made the 3d printable files available for free, so if you have access to a 3d printer you can 3d print yourself one 🙂
Boa noite! Essa cola é de cano?
Niceeee 🤠👌
Just asking, what support do i use to make this?
Not sure I understand your question. I use the default support structures in Simplify3D and manually add support a few places where needed
I like the music
What bed/print surface is that you have on your ender 3?
PrimaCreator FlexPlate PEI
agepbiz Thanks!
Omg where did you get your electric screwdriver. I need one???
Link in the description 😉
Plot twist: he never had a 3d printer, and he's been using 3d software and vfx to trick us.
I wait so long to wach your vodio
Is it possible to print this with cura?
You should 3D print a Lego character like Minecraft Lego Steve or something???
Don't forget the orange tip. XD
Adam Napolitano o:
How did you get the tree supports like that?
This was standard Support Structures, not tree supports, generated in Simplify3D
@@agepbiz thank you, I tried the tree supports in cura and they did not turn out well.
I have never used tree supports so I have no experience with how it behaves
*WAIT THAT'S ILLEGAL*
Do you use the ender 3 in the video?
Yes
@@agepbiz how do your get your support printing so easily off from your printer (I hope you can understand it, I am from Germany)
Default support structure settings in Simplify3D usually gives me easy to remove supports
@@agepbiz you don't use cura?
I only use cura now and then. I mainly use Simplify3D. It is a bit expensive, but it has been worth it for me
Please make more Rdr 2 stuff
good job it´s cool. machine gun plis to the next video
The screwdriver! Where can i get one?
It is called Mini ES121. Here is a link (affiliate) if you are interested: www.banggood.com/custlink/3DKGRkhnL1
You should make a make a 3d printed winchester. Also i want to know, do you have a Twitter?
Yes I do have twitter, link in the "about" section
agepbiz ok thanks!
There's no Better One you'll design things pile that and do them White the 3D printer
Can you make a m1Garand
make it like johns revolver
does the trigger move??
No
I love your content! Especially about guns
Siempre lo hace con su impresora
Did you use pla?
Yes
Guys I bought this and it doesn't even come with screws
You bought it? I am not selling these though. I made the prop model files available for free for anyone to 3d print it themselves
@@agepbiz oh
I REALLY WANT IT
But i dont have enough money for a 3d printer would probably cost me around 30,000 philipine pesos
You can make real gun with 3Dprinter..
In cal22 lr
Nice video
I got a plan
First And Creatives Video 👍👍👍👍👍😊☺👍👍👍👍👍
Holy shit please I want
that is freakin' awesome! are you selling those?
Thanks! Unfortunately no, but I have made the 3d printable files available for free 🙂 The 3d printer I used are a sub 200usd machine
When are you gonna 3D print Henry The Green Engine
Is it just my eyes, or are your hands unusually large, or is that a little bit under scale?