P1SC Procharged 2019 Camaro SS | RPM S9 E5
HTML-код
- Опубликовано: 8 сен 2024
- On Today's Episode of the RPM Web Series, we dyno tune a Procharged 6th gen camaro, a headers, heads and intake C6 Z06. And lastly we baseline a 5th gen Camaro, install headers and dyno tune that as well.
Don't forget to subscribe to stay up to date on our weekly videos, events, and track days!
For specific questions regarding installs, packages or dyno tuning send us an email at Sales@raceprovenmotorsports.net
www.raceprovenm...
Merch - raceprovenmoto...
Instagram @raceprovenmotorsports
20s back then were a huge deal, everyone was rockin like 16s
i have a 2019 camaro SS with a d1x running 8.7 psi that made 515 whp. safe to say i probably won’t be going back to the place i took it.
Lmao LT motors are a joke with boost, in runing 11 pounds on my whipple 5.0 and made 740wheel on 93 😂
Agustin Puente congrats ? U realize the lt4 and lt5 can go pass 1000whp stock
Derek Hays lmao the LT4 that comes in Zl1 or Zo6 lol, my stock gen3 coyote can hit 1k wheel without being opened also 😅
@@agustinpuente6383 We both know gen 3 can hit 1000whp , but it won't survive long at that power.. I've been at 800whp on my whippled 5.0 for the past 15k miles, but I'm currently building a short block to run 1000+ and not worry about it.
Michael Malloy I know it won’t but the Meir fact that it can do it even for a while is great for a unopened motor. One can spend 30k on a new base coyote is beyond unbelievable and amazing. And people still doubt these motors and say Ls/Lts are far superior when times have changed dramatically in the hp world
Fran is hilarious. His comment at 21:33 had me laughing so hard. As many cars as these guys work on. Fran hears one start up and it still catches his attention.
I put the 2650 on my 18 and i love it. stock otherwise made 555 through the 8 speed. Planning on doing LT4 fuel system so i can run e85 and 103 throttle body.
You made?
@@roroxmz made what?
Your plan on doing lt4 fuel aystem
@@roroxmz LT4 injectors, LPE 30% HP pump and DSX AUX LP pump.
@@jessemurray1757 I have a stock 2ss 2018 what I can do to improve it?
I remember when you were a cool kid with 20's (dubs).. 😂😂
On the flashing with the pedal commander installed. The communication lines get interrupted. GM shared a story in one of their dealer training monthly videos about a 2019 new body truck that they sent a field engineer out to look at. Customer had it lifted and larger tires. The tech working on it tried to reprogram the TCM and it kept dropping out and not working properly. The tech started to throw parts at it per GM TAC, and that led to them sending the engineer. The in-line Hypertech speedo calibrator was causing an entire pulldown on the data communication lines. Nothing would re-program correctly, and all the replacement parts the tech threw at it wouldn't program either. Hypertech has you install it behind the IPC, which nobody would even notice it.
Love watching the incredible motivation man thanks. I have an 05 Chevy Avalanche stopped running back water getting into the fuel tank. But after cleaning the fuel system . Still not starting again and I need to find a way to test pcm and have get the pcm retuned kill to find out how much. Shot kill for better aftermarket retune the only aftermarket part now is a cheapo aftermarket cold air intake.
I just bought a 2018 Camaro from I.G Burtons . I was told RPM did the cam swap intake and tune . I would like to get a procharger next. .
Nice. Just call or email us when ready
I love it my guys rpm keep up the work and I love the video and I love black Camaro ss 1le lot 💯💯💯💯💯💯💯
That torque curve on the orange camaro gained a bunch all over. Should plot the differences and show 10ish percent peak to peak isn’t the same when the tuneup is off. Shifting the peak number that far ahead is gonna make it a completely different car
@21:33 not getting paid for this one. LOL
Steve is getting lazy.
Haven’t liked camaros in awhile, but that one is nice
I priced it out and as much as it costs to get a 2019 Camaro SS with the 1LE package (to have magride and all) then add procharger on top of it that would get me stock ZL1 numbers. I think it may be better to but a used ZL1 and get the stronger engine, magride, looks from the aero and stronger A10.
Ya I don’t understand that. They go out and buy a brand new SS just to throw a shit ton of money at it when they could’ve had a ZL1 for the money
Interior quality improves every year. Body style changes. It's all personal preference.
John B I’m talking buying used at least. Buying new is a waste of money ask me how I know lol
Remember... the SS is a lot lighter than the zl1
@@cs1795 yup the fastest gen 6 cars are SS.
That Camaro at 13:26 looks really nice!
Not bad. I have a 5th gen, stayed away from the automatic due to the stupid DOD having L99. 3,742 lb's with a full tank of crappy 91 octane (it's all I have access too) on a calibrated scale. Without me in it. Stupid internet said 3,860. Makes me wonder how accurate the auto makers are on curb weight.
Doesn’t the mustang gt with 3rd gen coyote make more power on the same boost
Another awesome video thanks guys.💯👍🏻
They may only have two techs but those boys kick some f’n week out! I’m sure he feels confident in everything they do! There is something to say about not having to worry if something is done right or not. I would take less money to not worry!
THANKYOU, RE: THROTTLE CONTROLLERS.
I do remember those pedal commander things are meant to open the throttle plates more so that there is more air than needed, meant for cruising. Works best for quick changes in throttle (gas pedal changes), I have heard it increases throttle response on roll racing by a lot as the engine doesn't need to wait for air intake, which of course is not much time to begin with.
It does nothing. If u want it to open faster floor it faster
As many cars as you guys have done; Do y’all have a preference in power and the way it kicks on. I.e N/A , Centrifugal blowers, positive displacement blowers?
Preference.. no it's all about what the customer's plans with the car are.
Them wheels and tires look good!!!!!
I have the same Setup as the gen 6. What would be the guesstimate gain for full LT4 fueling, stage 1 cam, pistons,rods and e30?
Pedal commanders are trash. Up a few parameters on HPT and bests. I see you guys use air flow meter. Many told me to run MAP. My personal opinion it likes both unless boosted. If you’re comprehensive and synch timing fuel trim and knock great results. Keep a notebook with my findings. Picky with who I bless with my knowledge. Stay watching you guys to exercise my thoughts,
Even on Procharger tune the car is putting down more or on par with a stock zl1! That’s awesome.
More. The numbers are at the wheels.
On the black camaro did you have to replace the fuel system? Thank you
No
Shootin d$&@ through a straw 🤣🤣🤣
Man I would love it if I could get you guys to build up my 2010 Cadillac but i dont think you want to work on a dts northstar 32 valve motor
Videos are so much better when they dnt edit out the bad words.. IMO.
Good video tho 💪
We agree, unfortunately youtube doesn’t
@@RaceProvenMotorsports DAMN YOU RUclips. 😡😡
LOL. .... RPM 💪
You guys know what brand side skirts those are on the black camaro? Haven’t seen many 1LE satin black, most do carbon fiber or gloss black I’ve seen.
I bought them off ebay, I forget the brand.
@RaceProvenMotorsports Watch the RPM meter @ 05:31 right after the pull, why is rpm all the way down to 7000 and speed wad 0 mph?
Flashed the car needle sweep
Love the trans tune gift at the end!
How much torque do those a10s handle
Question I have an fbody with an ls2 will you guys work on that ?
nope 05 and newer
Procharger tunes sux!!!
Race car update soon!
I have seen the "dicks through a straw" comment, or some variation of it, on facebook no less than 10 times in the last I think... LOL
People from most liked to least liked:
1: KP
2: Bill
3: Matt
4: Fran
5: Eric
6: Zeus
7: Greg (Kong)
8: Fletcher Cox
9: Anybody else
10: Steve
Sick I made top 10.
@@Bsaint You did buddy!
Man I would love to have my GTO tuned by Fran🤘 sadly I'm in Kansas lmao
Road trip quest for power? ;o)
If I had the means, I wouldn't think twice
@@ExtinctLS1GTO I hope one day you can make it happen!
@@timephire same here man
Put it in a transport
Could you ask your friend where he bought the 1LE emblem on his rear bumper?
Ebay
WHATS THE INTRO MUSIC?????
Oops, missed a bad word @1:47 lol
i would love to see some new merch to buy!!!!
How much louder are headers without cats vs with cats
My GTO has headers and catless mids with SLP LM2 and it's pretty damn loud..I wanna say it would be a pretty noticeable difference, without a decibel meter can't really say exactly.
ExtinctLS1GTO ok because right now I have ARH long tubes with catted x pipe but it’s not loud enough for me! I just ordered cat less hoping it’s definitely noticeable ( c7 vette )
@@RelentlessDH yeah it'll get a lot louder depending on what mufflers you got..my SLPs are just a bullet muffler so it doesn't get quieted down much lmao
ExtinctLS1GTO I’m running them through the factory NPP exhaust
Alot louder
Lmao my BONE STOCK C5Z made 10 more horse than that 5th gen 😂
The auto eats a shit ton of power...plus auto 5th gens are only 400 stock at the crank...
1216jimmyz not disagreeing that the auto eats a ton of power, but my comment was merely reenforcing the notion that 5th gens are flops.
@@ThatTurboZoh it's mostly the automatic ones....they pull some impressive numbers with sticks...
@@ThatTurboZoh my LS3 made 410rwhp with a stock intake
Your bone stock c5z is also almost 20 years old bruh, idc how much power it has flip up lights belong in the 90s.
Camera guy seems like he is annoying everyone.
He did. He’s no longer here. So follow the new videos
375 2010 junk
I love u guys🍻