Ford F150 2/4 Belltech Drop Kit Installation 2wd & 4x4 2009-2018
HTML-код
- Опубликовано: 7 окт 2024
- Dropping your 2wd or 4x4 F150 is now easier than ever. Check out our video showing you how to get it done right the first time. Great parts equals Great Results.
Buy Direct At www.reklez.com
Shop Line: (832) 770-4366
---->Thank You For Watching God Bless! Finally on our website buy your kit here: reklez.com/collections/ford-f-150-drop-kits-parts-eco-boost-fx2-2004-2008-2009-2014-2015-2018/products/2015-2019-ford-f150-2wd-4x4-all-cabs-belltech-drop-kit-with-shocks
I have a 2020 we 2wd 2 peice driveshaft the same kit...shakes at highway speeds..has shims installed they do not sit flush with the flip bracket at the front towards the the cab is that incorrect?
The "g" in hanger is actually a soft consonant. Yes, English is a very subtle language. Thanks for posting.
Well voiced and instructed. Love to see the 4x4 drop. 🏁✝️🌅
Thank you
Nice video. There are others for install instructions so that is ok. Thanks for the note about having to slot the front A-arm holes if you go 3"+ in the front.
Love this subtle lowering. I’m a realtor and adjuster and working in the city with a truck to lowered would not favor me although I would prefer it. Yet to many inclined driveways, I also tow a boat here in Miami, Fla and soon a small camper. Lol had to finish paying the boat, now two years ago before I can buy the camper lol. Seeing professional clients and taking them around would be more appropriate as well. I truly appreciate your vlog have a great weekend. God willing will own my first pickup 2020; I currently towing with a SUV Tahoe.
2/4 is perfect
Yeah I bought the 24 lowering kit like you put on this truck here in this video but you saying that we don't have to slap that alignment adjustment Bolt doing it the 2 in the paperwork with my kid it says you have to do it now I want to know before I get started here thank you
Very nice look a great job well done !
Great video. How much do you charge for a belltech 2/4 job on a 2023 f150 crew cab 4X4?
well explained thank you
One question, how about weight capacity after lowering??? Thank you
Obiously a lot less....
@@SOLDOZER I wouldn’t think so.... stock springs and better struts, it might sit lower loaded but it should have factory payload specs
Hi, I'm way too far from Houston area New York city to be exact, I will prefer no to mess around with the suspension.... there's any shop or connection to any shop in the area that can be trusted to do the job the right way, I don't mind to drive 4 to 6 hrs, thanks
THERES FEW OPTIONS ON THE WEBSITE.... SO WHAT KIT IS THIS FROM BELLTECH?
What can you recommend for a a 2/4 drop on a 2008 fx2 ?
Do yall have an actual installation video or just this overview?
Did you guys actually make a video for the white 2012 f150 you show at the end????
Hey I'm putting the two four drop on my truck and I got The Three Degrees I'd like to see a picture how they what it looks like a mounted on the truck cuz mine is like it ain't like stacked on top of each other that kind of spread it out and I was just wondering
That really looks good great job.
I have single cab with belltech 2/4 drop you think 24s will fit
What type of grease did you use for the larger bolts look like bearing grease from the color?
Hey I got a question I installed the 3/4 kit on 2018 f150 4x4 on the front but so far I don’t see any drop at all, 36.5inch to top of fender before and 36.5inch after! Is it supposed to go down after driving it around? So far I’m not to happy with the kit!
Same issue with mine, I even moved the truck forward and back after and no change. What did you figure out?
I’ve been seeing that people had problems with vibration with a 2/4 drop and I’m wondering if I need to change my drive shaft before installing the 2/4 drop
Seems like every drop I seen on a Ford is never leveled? If it’s not the back. It’s the front that’s higher. I just bought a 2012 and wanna do a 2/4 drop, but from what I see it’s not actually leveled?
Will The 1001sp work on 2013 f150 crewcab. Part liated on your page is for 15-19
do they make a kit or one that can be modified for a 2014 fx2?
Would it be a issue to double nut the U-bolts and cut off the access threads flush with the second jam nut.....just so you don't hit or bend or screw up the threads on the u-bolts
I have a 3/5 Belltech drop kit. What did you use and what is the best way to slot the hoe for alignment? Any tips on this would greatly be appreciated. Thank you.
Check out our 5/7 f150 drop kit video. We show you how we do it. Thanks
It looks like you don't have the three degrees in there I need to know if you got them in there or not I'm putting one on my truck
Is there a set of alignment specifications to use for the 3" front drop?
With the Belltech 1001SP 2/4 kit does the fame have to be notched for the lower control arm bolts on a 4WD?
What’s up bro? Question I just had my kit installed in my single cab f150 2022 and it rides horrible in the rear.
Any suggestions ?
For the front drop and subsequent slotting of control arm mounting hole is that documented in installation manual?
What Size Wheels would you suggest for this drop ? 22 or 24 ?
I have same kit on my 2020....how much pinion Degree did this one have to shim??..mine shakes and rides like shit from the rear above 50 on most roads I have a 285/45/22 tires in it...there's shims installed but the diff looks almost level...any input is appreciated
Would this work on a 2013 Ford F-150 xlt ?
Did you have to remove the bed to do the rear hangers? I had to do that on my old sierra. Also i love beltech just got a 2019 f150 and i plan on doin this next week
You do not. i installed a DJM slip kit on my '18 on the side of the road.
What wheels/tires were on this truck? Trying to decide on 3/5 or 2/4 on 40r22's
I have a 2017 Raptor. I want to drop it for the summer. Swap front struts and do the rear flip. Any advice? I cant seem to find anything out there. Thanks.
Will these lower kit have a negative effect on the towing and hauling weights. If so what are the negative impact on the truck and weight.
Need to know this too
For any people that live in places where it snows and are running this kit is it safe to drive a lowered truck on the snow?
Can i still run a side exit exhaust with this kit ? I see the lift hanger in the front of the leaf spring seems to be in the way on the passenger side where the pipe would typically exit.
do any drop kits affect payload at all?
So, does the new shackle that come in the kit goes in front?
What is the part #
I have a 2011 f150 short bed 4x4 and hope I can do it
Would be a good kit to use on a leased truck? Can we put it on and take it off in three years and turn the truck back in with out problems?
yes you could, and small lift kit or lowering kit 3 inches or less usually has no permenent modification
I am picking an 18 up 4x4 v8 my only question is do you remove a leaf or can I put helpers I have a few trailers airstream also just want to make sure it won't bottom out or does anyone bagg tears with slam air
chancellor t ihc helper bags
how much does something like this cost? labor
Should work with the long huh?
Excellent man!
How much does something like this will set be back?
Is that the 6.5 box?
Have you guys have any 97-03 2wd F150 lowering kits in stock?
I have a 2002 extended cab f150 on 305-45-22's & I was wandering if it could be done???
How much does this run I have an 09
Pretty much a rarity; dropping a 4x4. It's what I'd want. Lower would be better for my street only truck.
Thats what i am building
Does dropping this much cause excessive wear of the drive shaft?
No, just make drive line angles are correct.
Cool video. Thank you
Will this kit work on a long bed 6.5 ft bed..and4x4...I always see 4x4 but short bed???
I would like to know this too. Having a hard time finding a kit for a 6.5 bed
Would this lift work on a 2011, i check your web page and cant find a drop kit for my 2011 2wd f150
How much does this run you parts and Install ?
Will this kit work for a 6.5 bed
Any info / done deals for 04-08 4x crew drop?
What's the cost? Parts and installation?
How much for the 2/4 drop Silverado 05
Will there be any Drive shaft issues for a 4 x 4 3/5 drop 2016
Yes the front holes for a arms
This works for a 2012 2wd Single cab?
Do you have to do any modifications in the drive shaft or the rear end
No we don't.
Hi, I a shop install a 3/5.5 Belltech lowering kit on my 2017 f 150 extended cab and there is now a vibration when gassing hard from stop and around 20-30mph. goes away after 30mpg. seems worse and better some days. I took it back 3 times they tried 2/4/6 inch pinion ships and nothing worked. They said there was nothing wrong wit the kit but my truck. It didn't have the vibration before I lowered it. took it to the dealer and they told me that if I wanted my truck lowered I would just have to deal with it or return it back to stock highlight. Have you herd of this issue before and do you know what may be causing it. Any info would be greatly appreciated and thanks in advance
H need a shim in your driveshaft
@@howards1771 were do i get the shim mind is doing the same ?
Where can I get a kit for my 2016 f150 4x4
Might be dumb but I can’t find the 2/4 drop kit on your website any leads? 2013 Ford F-150 crewcab 4x4
reklez.com/collections/ford-f-150-drop-kits-parts-eco-boost-fx2-2004-2008-2009-2014-2015-2018/products/2009-2013-ford-f150-3-5-5-belltech-drop-kit-972sp-with-street-performance-shocks
Can I still daily tow my enclosed trailer with this drop?
Would like to know that too. I pull 6K a couple times a week
With some air bags I bet it wouldn't be too bad.
I called Bell Tech. They said i need to replace spindles with 2 inch drop
I went onlinr, but the kit doesn't show up.
What size tires do y’all normally run on this drop
275 40 20
Can it work. On a Mazda B3000 ?
How much for that same drop kit on a 13 f150
What prevents fore and aft movement of the rear axle if it has shackles front and rear?
Front one does not swing. It's stationary.
@@ronriehle1337 Thanks. A stopped the video and now see the welded on piece that slots with the center of the OEM mount!. If you don't stop the video it is not apparent.
Why are 8ft boxes not listed on the website for flip kits?
Not common truck for us.
How long does it take to do the drop I am located in Dallas
@@ReklezSuspensionWorks thanks, still possible though? I see beltec doesn't list it either...wondering if it's a safety thing.
Cuanto cobran por una ford 2006 dropped?
Llama al taller el lunes (832)770-4366 gracias.
How much to install this kit on the truck parts and alignment
It is a 2014 f150 2 wheel drive
Where can i purchase this kit. I have the exact truck
thats cool no one cares
Would this fit in a 2010 Ford F-150 if yes on the website it says 2015 to 2019
different kit as the front struts are different.
Any vibrations?? From the driveshaft
J Cortes I’m having issues with vibration tried a lot of different degree angles can’t figure it out
@@CR10581 damn, that sucks. I was planning on doing it to my 2016 2wd... but not if I'm going to have those issues
I go to your website and I enter Ford F-150 2014 drop kit 2"-4" ------ I get a message reading NO RESULTS ---whats up with this ????
its the 1006sp kit i have a 2014 4x4
Can you do a 4/6 drop on a 2019 without cutting anyting
You will need to notch the frame
false, i have the 3/6 from djm and i didnt need to notch.
I'm going to give you guy's a call 2014 lariat supercrew
Could you just take the stock blocks out the rear to lower the back ?
Just buy 2" drop/leveling shackles. They take maybe 2 hrs to install, and are WAY cleaner/safer than trying to alter the leaf spring assembly. I believe I paid less than $60 for a set for my 2012.
Anybody ever do a 2/3 drop?...I still want to haul stuff without sagging & having my headlights blind on coming traffic.
Get helper bags
See no reason to go any lower
One huge issue I ran into that wasn't covered in this video. If you're doing a 4x4 use the 4x4 instructions. My kit only came with 2x4 instructions so I thought no big deal, must be the same. WRONG. You will be doing the front end over again like I did. When using the rings for lowering the truck in increments, with a 4x4 the drop will be double that of a 2x4 with the same amount of rings. Also it's a lot easier on a 4x4 to cut the strut to lower control arm bolts off than fight to get the arm down enough to get the strut out. If you plan on maybe reusing the stock strut don't do it. oh edit here. Also belltechs table for how many rings equals how much drop is way off. I wanted 1.5 so I went to the tables, got the rings I needed and was a full 5/8 off on one side and 3/4 on the other lower not higher. Yes the product is nice but the fuckin instructions need a review. I have a single cab 4x4 but nowhere did it mention any differences between a crew or super cab.
Good to know. Plan on putting this on my 18 supercrew 4x4
I have a 17 4x4 supercrew and just want to do the 2 inch drop in the front on the belltech struts. How many rings will it take to accomplish this correctly? Thanks
@@kipconner5143 I'll go through some of my notes and get back to you shortly. Do you have instructions for 4x4 lowering?
@@peterbeertema6494 yes and it says 2 16mm and 1 8mm each strut. When the shop installed them they said they lowered 2 inches but it looks like 3 inches. Now I have to raise it up. I have 2 16mm rings left and 6 8mm left from the strut kit so I Don't know what they used. If I knew how many rings that came with the kit would help but I can't find out. Thanks for replying back.
@@kipconner5143 I know I put an 8 and a 16 in following the 2x4 instructions and just shook my head. I think I ended up with 3 16 mm rings per side which gave me a 2 1/8 on drivers and 2 1/2 on passenger side. I never did see 4x4 instructions to see what they say. All in all I don't feel comfortable giving you advise because I also have the flip kit with matching shocks and I'm single cab short box as well. There may be a f150 lowering group on facebook that will have a more trusting answer. I do know that doing it over again doesn't make it more fun. Cheers
Skip the install... junk video.
Don't they make a non-flip kit also??
Do you know if this kit will fit f150 supercrew ?
any vibration around 30mph? I read a lot of complaints about that and I didn't see shims on this truck.