How to keep your factory backup camera, OnStar, steering wheel controls, and Bose in your GM vehicl
HTML-код
- Опубликовано: 20 июн 2017
- In This video we talk to you about retaining factory features when replacing your radio. For a lot of cars, you need a smart harness to do this. In this video we talk to you about a Smart harness from Pac-Audio. Enjoy
Install Tools -HAND TOOLS
Klein wire strippers amzn.to/2pFtjcF
Channellock crimping tool amzn.to/2q8AQ7c
flush cutters amzn.to/2prC527
Insulated screwdrivers amzn.to/2pFjNGC
Klein wire crimpers amzn.to/2rm1qaU
Kline cutting pliers amzn.to/2rmdzNa
Greenline wire cutters amzn.to/2rlXfMc
Vise-Grip wire strippers amzn.to/2rm0jbl
Channellock wire cutters amzn.to/2rm0zqP
Channellock duckbill pliers amzn.to/2qn7EZW
Pro 4 awg Crimp tool amzn.to/2pQoq0x
Nut drivers amzn.to/2rmePzS
Right angle screwdriver amzn.to/2rmfWzI
tool holder amzn.to/2qrsgyi
plastic trim tool amzn.to/2qMAFj3
Door panel tool amzn.to/2rby7uF
Delphi pin tool amzn.to/2q7sRqM
0 awg crimmoer amzn.to/2sxJyud
HOOD TOOLS-
rear door camera holder amzn.to/2rQ99RI
hood prop amzn.to/2rQeLeN
gas support clamp amzn.to/2rO0I9f
AIR TOOLS-
Angle Die grinder amzn.to/2ruzOk9
Air Saw amzn.to/2qArHlS
LIGHTING-
hand held led light amzn.to/2qyfb7Z
Under hood Led light bar amzn.to/2qApGYQ
luma cube amzn.to/2rlc194
METERS-
PAA-3 RTA amzn.to/2rebDsY
test probe amzn.to/2pQ0877
Fluke 114 amzn.to/2sUK3lb
Fluke 115 amzn.to/2sUYGVu
Fluke 179 amzn.to/2szW2C5
Needle tip test probes amzn.to/2tsF2ho
TPI 440 Single Input LCD Oscilloscope amzn.to/2sA8CBa
POWER TOOLS-
Milwaukee right angle drill amzn.to/2rlR1eq
Bench Mount Electric cutter amzn.to/2rQohhV
Soldering gun amzn.to/2prtM6q
RIVET TOOLS-
Thread Setting Hand Riveter Kit amzn.to/2qBIFie
Heavy Duty Blind Rivet Nut Kit Set amzn.to/2trTtSD
Rivet Nut Nutserts amzn.to/2riLpoN
screws m5 amzn.to/2riBgbw
power probe Torch amzn.to/2qZJ0zB
1/8"White Fiberglass Rod amzn.to/2scr8jb
1/4"White Fiberglass Rod amzn.to/2s31T47
Install Accessories
tesa tape amzn.to/2q8Ym3s
3 inch Roloc pad amzn.to/2qAueNb
Microbypass amzn.to/2pZCgwQ
foam stripping 1/2” amzn.to/2qwUCGL
Foam stripping 1/4” amzn.to/2sgEv0u
Flush Trim Router Bit amzn.to/2qBRTeo
Expandable Braided Sleeving 1” amzn.to/2qBGxap
Expandable Braided Sleeving 1/2” amzn.to/2riI9JX
Expandable Braided Sleeving 1/4” amzn.to/2rQ8NdQ
heat shrink tubing amzn.to/2riNCQR
USB cable USB-GM1 amzn.to/2pX68e1 
Авто/Мото
I just want to say that this is one of the best car stereo installation channels on RUclips. You guys have helped me so much. Thanks for the videos!!!
I gave up on getting the steering wheel controls to work after hours of messing around with this thing 3 years ago, I decided to try again tonight and your video helped me realize I needed to program the buttons in, THANK YOU!
great information from your videos, a couple of them have helped me out, thanks!
Good video thank you! I installed a RP5-GM11 & Pioneer AVH-W4500 in my 05 corvette and was getting no power to the rear speakers. I found your video and saw you tugging on the wires, did the same to mine and they were loose! Plugged it in properly and now everything works.
Best video yet for this job. I have a Tahoe with Bose premium sound. I have the same harness you demonstrated. My dilema is after taking out the factory radio there are 4 female receptacles and they look very similar. I am ready to install and dont know which aftermarket plug goes where. I will study the pins and see if I can match them up.
After 20-30 tube videos. This one made it clear for my rear camera cable connection that for some reason I couldnt see right in front of my eyes
love your guys work. quality.
+Diego O thank you
I have a 2007 Chevrolet Silverado LTZ new style I'm trying to install the alpine ilx-w650 with the rp5 gm31 my question is to override the factory amp with aftermarket what interface would I need to use
I have a 2003 cadillac escalade and want to upgrade my factory tape, cd deck. I am leaning towards an android based double din. What kind of harness and wire adapters would you recommend to keep my factory steering wheel button functions as well as adding a backup camera?
Great video!!!
Thanks for the video guys it was a big help. But wondering what do you guys know about replacing the stereo in a 2017 Nissan Sentra with steering wheel controls and factory backup camera any advice or video would be a big help. Thx
@fivestarcarstereo is there a way to cut off the door chime and splice those wires into the speakers somehow to retain the chime out of the speakers as it would have come from the factory?
Have a 2013 tahoe no back up from factory I have 3 question first how do I hook up aftermarket back up camera if I’m installing this rp5-gm31. Also I have aftermarket speakers as well to install can still use aftermarket head unit with nose amp amd the pioneer speakers ? Or will I need run wires to doors ? And last is there a way to retain factory mic and not have to hook up the one that came with deck ?
I know video is a little old but I just bought this harness and there was a bulletin inside the packaging for rerouting power wires for double din radios. Do you guys know anything about that? I ask because I bought the 31 and the diagram in the bulletin was using an 11 and the wires are completely different.
I'm using the same rp5 gm31 but using a alpine w265bt the power antenna off radio does that hook up to red wire as well or does it hook up to the blue wire coming off the gm31?
Thank you very much! 🙏 I had my Amp non Amp hooked up backwards and my top volume on the Tahoe wasn't that loud.
It was driving me nuts!
Question so how do you hook up an 4 ch amp to it ? And can you use the rcas from the radio for subs
About to install a Sony XAV-AX5600 and PAC RP5-GM31 in a 2007 Tahoe with factory Bose amp. Do I need to plug in any of those RCAs or use the harness with the brown connector? I only want to retain a few basic steering wheel controls.
I have a question...i recently installed the Kenwood ddx9707s into my 06 GMC yukon denali with the Bose digital amplified system. I have a rear seat entertainment that came factory with my truck. Now i used the rp5-gm11 harness but my rear speakers only play as front speakers and become silent when i use the fader to the rear speakers. I have everything hooked up the same way you explained it in here but can't figure why they wont play separately from the front. Until i read the fader doesn't work with digital amplified systems using this harness. Now my question is..is there another harness that has that feature cause it sounds like I'm missing out on sound with my rear speakers not playing independent from the front speakers. My apologies for being so long..
When hooking up the alpine to rp5 gm31 do you connect the power antenna up?
I have a radio selection switch on my pac interface kit. And have a dual double din 276bt. Dont know which switch to select because its blocking out the signal from my rca port at the back of my head unit
what about the yellow black that is on the factory aftermarket harness is that connect to anything or do i just cap it off
My ? is that you connect red and blue from the rp5 gm31 to the red on the harness cables from pioneer
Thx u all good n nice but how about u use a rp5-gm31 with a power acoustik pd-1060hb radio in a 2012 chevy impala thxs
Hi, Great channel!! Can you tell me where you get the seat and steering wheel covers ?
I have Chevy Equinox 2008 with OnStar, but I don't use the OnStar. I would like to retain SWC though. Do I need PAC RP5-GM31, RP4-GM31, or can I get away with something cheaper like C2R-GM29?
Where did you connect the extra black and yellow wire on the harness that connects to factory harness?
what is the best eway too hook up a pioneer avh 291 bt running all the regular wires going too the speakers and adding 2 amps can the stereo hold power mine keeps shutting down after about 15 or so minutes please help guys
Did y’all do a full install on this vehicle?
I would love to see one specific to an ‘04 buick rainier with onstar and xm (non Bose, non dash speakers) because I want to keep my XM and SWC, but am not sure about onstar functionality.. also I have read many places that I can’t keep factory xm, so that is definitely something I’d love to know more specifics about.
Can you please do a Video on GMOS-045 for Cruze?
what do you do with the blue and yellow wire with the swc
Hello
I have a 2007 escalade. Just installed a pioneer 8200nex. The only problem im having is the the back up camara is displaying reversed. I am using the pac rp5 gm31 .
Is there anything i can do to flip the display?
There's no Aux port in back of my after Market deck but there's the one in front on the face, can I use it?
Purchased the RP5-GM11 for my 2007 Silverado with bose system, no onstar or swc, i get zero sound out of my speakers, i have been using the LCGM24 for the past 2 years, which works, but i was unable to get an external amp/sub to work which is why i switched to this new one.
Can I use this on my 09 Sierra Denali or do I need a certain one ?
I have the same rp5-gm31 hooked up and it works perfect. Now I want to add an aftermarket amp to the four door speakers in my 2007 silverado no bose system. Where would I hook up the speaker outputs? Thanks
Had any luck ?
Can u let me know what pac I need for my 2008 chevy tahoe LT 4x4 please and thank you
Does this kit use the builtin microphone to make calls?
So I needed help with my 2011 Chevy Traverse LT SWC CONNECTION TO A EONON PX5 using a PAC R**-GM31 interface! On my EONON it has Key1 & Key2 but it doesn’t have a 3.5 jack to connect from the 10.1 EONON! Please help!!
Hello I’m trying to connect a Rpk5Gm4101 on android tablet with out the 3.5 app using the cable but don’t know where to run the Key 1 Key 2 wires ? Please help
Kenwood DDX-57S and RP5-GM31 install no one seems to give me the correct instructions live in douglasville ga any videos on this been looking for a couple of weeks and nothing on that specific thing going in a 2011 Tahoe LT ?????
If you plug it in before setting the dial, will it still work?
I have one of these installed on my 2012 Yukon Denali and no matter what I do I cannot get my factory backup camera to work any suggestions
I have an interface RP5-GM11. The red wire from the micro relay where should it be connected? I can not find anything about the red wire!
I added this PAC to my 2017 GMC Acadia Limited Kenwood DNX994S. Now my forward collision and lane keep assist warning sounds doesn't work. I can see the warning on the heads up display, but no warning sound. Does anyone know a fix for this? Thanks
Dean is the boss!!!
Thank you
I'm trying to find this for 2018 Nissan Sentra...plz help
Please help, does this work on 2017 chevrolet trax??
Do you guys have a video of installing a radio in an 07 and up yukon or something with the same dash. If so please post the link to the video.
Gerardo Perales ever find anything? It’s crazy how impossible it is to find with how abundant Tahoe’s and Yukon’s are
Can you do a video for a 2017 Silverado
How do I use the reverse camera and android auto wires with a boss radio instead of pioneer radio?
What harness i need for 2011 impala ltz bose system
I have a pac5 gm11...2005 Tahoe with bose and onstar. Should I leave the solid blue wire from the interface capped or should I connect it to the red wire? Working with a pioneer 200ex.
i am trying to figure this one out too
what did you end up doing with the blue wire?
@@corey.morreale i connected to power wire....nothing major happened
What i did was just connect it to power antenna ad u would connect it to an aftermarket amp, it wasnt playin audio as soon as i did that it started workin
So I have the pioneer gm-d8604 amp & the 4 pioneer ts-d1730c and a Pioneer TS-B350PRO 3-1/2" High Efficiency PRO Series Bullet Car Tweeter for the C pillar will this be sufficient?
+lolo ent if you like bright and loud, your good
Have you guys done a video of adding factory controls to steering wheel. I believe my dodge it was an option for steering wheel controls but you needed to have the nav unit which mine didnt. I would like to add these options. what's my choices out there?
dbetts3087 sorry never done that before
I just connected a kenwood double din into my 08 corvette with on star but after installing with that wire hardness I have to turn on the on star and then off in order for the audio to work on stereo am I supposed to cut the Brown wire and connect it to the blue???
fleiva30 my Onstar no longer has audio. Did you ever find a fix?
fossilsol69 not yet i haven't got time.. I'm going to take it to a shop better and see if they can correct that
fleiva30 I did have mine done at a shop and they had to put in a small speaker which distorts because it can’t handle the factory amp. It’s basically unusable. I didn’t know Impalas had amps except for the ones with Bose systems. Please let me know what you come up with.
The PAC RP5 works well on a 2008 Saab 9-5 with original Bose system? I want to change my stereo unit but i don´t know how many devices I will need.
PAC does not recommend their Harness for that car. Unfortunately no one lists anything for that car.
Will I be able to retain the wifi as well
Question: does this regulate the steering wheel cruise controls as well, or just the “radio” steering wheel controls? If I install a new radio without this module, will the cruise control cease to function?
Only the radio buttons are programmable I found, but also my cruise control worked when my steering wheel buttons were not working so it doesn't break cruise.
I watched this video which was a great tutorial, but my OEM backup camera and rear seat video will not work. I am installing the same equipment as you did in your video. Any advice????
Same here no back up cam wat a bummer
I'm install a rp5-gm11 on a 2004 gmc envoy everything works good the only problem I have is the after turning off the car the radio still on even when I remove the keys and open the doors. Somebody help me!!!!
Were you able to retsin factory bluetooth mic for you enclave? Meaning you didnt need to install aftermarket mic that comes with the radio.
Retain*
Plz 5star a lot of ppl are asking about the back up camera did everything you said with the same kit and no back up plz HELP!!!!!
What kit do I need if I want to retain steering wheel control and back up Camera I bypassed the bose amp
That kit should do it all
Off topic but since you guys work with so many interfaces. Are there any interfaces to replace the radio for 2016 civic with factory touchscreen but no digital amp? Factory radio is buggy AF.
+Jon Robertson sorry nothing yet
I have a 2008 chevy avalanche.. I'm using the rp5-gm31. With my pioneer radio.. I cant get my factory backup camera to come on when I put truck in reverse..what wire should I be using..
I have same issue , did you ever figure it out ?
Same issue. No output on the purple white wire for reverse camera on mine. Camera is working in reverse if I put 12v to the camera wire on my radio the camera shows up.
do you still need a bypass for the reverse if you use the rp5-gm31?
No
I installed one of these on my 2012 Silverado, every time I turn up the volume on the pioneer radio it’ll shut off and restart. It’ll work fine at low volumes, what can it be? Also I programmed the steering wheel buttons it worked perfect for a couple days and now the track up and down buttons won’t work the volume, mute and phone answer buttons are fine still
Do you still have this problem?
As un video en español te lo agradeceríamos mucho la verdad esta bien explicado en inglés
I didn't see where he hooked the wire blue w/ white strip for the nose audio.
What did you do with the brown harness that had the white/red/yellow Jack's where does that plug into
It doesn't go in this
@@thezekeprelliottexperience4907 u would know wouldn't you
@@toneytone7497 ya actually i do im installing one now there's a video input on the pioneer touch screen witch makes that plug useless its for different models so you plug your actual video wire into it from your camera and there's a small red wire that connects to a purple wire on the deck or just into power depending on if you only want it to work in reverse or always on
@@thezekeprelliottexperience4907 well u just burst my bubble, one more question mr know it all, jk, but if I want the reverse camera with steady power being on when I'm not in reverse which wire do I tap in. And thanks for your help in advance I really appreciate it
@@toneytone7497 the red power wire on your deck
I purchased the RP5-GM11 for my 2005 Avalanche. In the instructions there are no aftermarket SWC steps. Am I able to reassign the VR button for Onstar to just be regular VR or is there no way to reassign it? When I program the buttons it does not let me change the Onstar VR button. Instead, Onstar just turns on. Thanks!
Did you ever find the answer to this question? I’m actually about to do this exact thing. I know PAC says the radio switch should be set to 7 did you do that?
Also did you use the 3.5 Jack or did you have to splice the swc key?
@@flyhog8574 If I can remember correctly the RP5 maintains all OnStar capabilities so you cannot reassign the VR button. I do believe that if you use the RP4 instead it will deactivate OnStar completely and I think you can reassign the VR button that way.
I kind of with I used the RP4 because I have no use for OnStar, but oh well. Hope this helps.
Can you leave the chime module off
Excellent video. In the video you said the module allowed the use of factory XM radio. The customer is installing an aftermarket head unit. I did not see you install one of those XM radio modules. The XM radio module is required for am XM ready head unit, right? Did you install an XM radio module in this installation?
G P I'm wondering the same thing my GMC Sierra has xm and I pay for it every year my pioneer unit says satellite radio ready and I bought this rp5-gm31 I'm wondering too if I need an adapter
I hoped that Five Star would jump in with an answer.
G P after looking a bit more into it I'm thinking you don't need the module to retain xm through aftermarket head unit, the rp5-gm31 should retain the xm radio as long as the radio says xm or satellite radio ready
I have not purchased a compatible head unit. But, for an XM account to use a head unit, account ID information needs to be entered into the head unit. This would suggest there is an interface where this information can be entered.
G P if your new unit is not xm/satellite radio ready then you will most likely need an adapter interface, what is the brand of unit and what vehicle are you installing it on ? I will find out what you need. Also I'm going to be installing mine myself in about a week I'm just waiting for the micro bypass to come in the mail and I will be ready for install, I will let you know if my install on the xm ready radio head unit works broski
I just got the rp5gm31 for my 09 Acadia everything works but when I put the car in reverse back backup cam does not come on what could be the problem??
Hey question did you figure out what’s the issue wit the back up cam I’m having the same issue
has anyone figured this out yet?
Nope same here
How do you retain the DVD player?
Did you ever find out?
Didn't you guys use the factory xm antenna? What is the extension you guys use? Isn't the module supposed to auto learn the steering controls?
+swarren925 the XM is located in the back of the car, drives side behind the door motor. We use a Sat1 and a 20" extension from Amazon. The PAC is preprogrammed for a basic use. We were doing CarPlay so we did a custom program.
Five Star Car Stereo I have the same car you just did so I was curious before I start to do my car.
Wait so instead of buying a bypass plug cap the green wire?
Will this device work with a ATOTO ANDROID stereo?
Im here for the same question
I cannot get power on a rp5 gm11 all is hooked like the manual says
I lost backup camera functionality when I upgraded from factory Bose to a 4200NEX in my 2011 Altima. Is there something similar to this product that would resolve this issue?
+abyde yes check out this cable
AX-NIS32SWC-6v
Five Star Car Stereo Awesome! Thanks!
abyde Altimas have bose and cameras ?
Robert Salas Does The Pope wear a funny hat?
i lost camera functionality too when i upgraded from factory bose to 4200nex pioneer also how do i get it back?
I'm connecting a boss double din what number do I put it on plz help
You ever get an answer?
Have a 2013 silverado , using rp5gm31 swc not functioning nor factory xm
poohfin69 I switched my radio from a JVC to Pioneer and had the same problem. The resolution for me was to disconnect all vehicle harness connections from the rp5gm31, change the setting dial from 7 to 6 and back to 7, plugged everything back into the rp5gm31 and it worked. Ensure you have the dial set to the correct number before you connect it to your stereo. Depending on the radio also ensure the 3.5mm cable is plugged into the w/r hole and not AUX. Hope this help.
so the brown wire is conected to wich wire to,the one you cut where that got to
The brown goes to the mute wire on the radio( if it has one). Pioneer uses a yellow black wire. If you cut the wire and do not connect it to anything, onstar will just talk over your radio. The radio will not turn off though, which is nice.
Five Star Car Stereo so what u do wit the harness for the camera sub and center
@@FiveStarCarStereoInc quick question so everything works but I can't get my SWC work with my ATOTO deck. I have a. Rp5-gm11 I kept my bose an put in a amp an sub which works fine I just want my SWC to work. I haven't cut the brown loop yet. When I push the buttons on the steering wheel the pac box blinks so it's picking up the signal but no interaction with stereo. What can I do to troubleshoot my issue.
Hi. What if I forgot to dial the switch before turning it on
Unplug the unit completely, switch it, let it sit for 20 min, plug back in.
did everything you did but i still but back up camera still doesn't activate when shifting into reverse
Did you connect the power wire from the camera to your reverse light? It must be connected to the hot wire of your reverse light. The same wire on the front must be connected to the trigger wire (back or reverse wire)of your aftermarket radio.
Only took them 18 years to follow suite with radio manufacturers wiring colours lol.
+CarPhonix CarAudio true, don't you guys use the Metra stuff 😳🔫
I thought when you install a radio its best to unplug the battery
+Sean Johnson not on all cars, sometimes it causes more issues. Other times it is a must. You learn as you go
Sean Johnson that step is for newbies
You
Why don't you show what you did tlwith the blue wire on swc control? Why do all you guys act like people know this stuff. You said absolutely nothing man. Fail
I have an off-brand Atoto head unit (I only bought based off reviews on Amazon) I have the same RP5 interface shown in the video, with the 3.5mm plugged into the SWC jack on the unit, but have no steering wheel controls. Any idea? Do I have to connect the key+ to anything?
Did you get yours hooked up? I have the same Atoto radio and RP5 interface. What radio did you select on the switch?
Did you ever get an answer on this?
@@flyhog8574 It's been a few years now but yes, I did get them working, but the steering wheel controls only seem to work half the time
I need help please. Im using the same pioneer harness. It has a red wire if the red wire from the pac rp5 is going to be hooked up with the blue wire what wire does the red wire from the pioneer harness does it go hooked on to?
The red goes to the red. The blue is for amplified or power antenna it also gets connected with the reds.
Thank you for your help. Really appreciate it