Hey Guys, sorry for the delay in getting a new video uploaded. With FourWheeler in full swing it is hard to find the time I need to get these videos out, but I now think I have the time to get into a groove over the next few months.
IAN!!!! Dude, you have no idea how happy I am to have found your youtube channel! I grew up watching you and Jesse on Powerblock every Saturday morning. You two were a huge inspiration for me. I really hope you are doing well and look forward to watching your videos.
I have been watching you for a long time, over 15 years easy, and your skill and willingness to teach others a cheaper alternative is what makes you awesome in my opinion!
Yeah sorry for the delay, been a busy winter and honestly struggling with how to treat this particular channel because I now have so many video channels
THANK YOU SO MUCH!!!! A MUST-HAVE FOR ANY WORKSHOP!!!! GREAT VIDEO AND EDUCATION. THANKS FOR SHARING!!! I LOVE IT!!!! SOMETHING TO CONSIDER THIS HOLIDAY SEASON!!!
I used different plans to make my own bender years back. But it was a very gratifying experience. this one looks alot more simple and easier to build. Good video tho!
just ordered one of these. can't wait for it to show up and begin my bending. thanks for the video. should help me out a lot with assembly. my only complaint would be having to adjust the volume back and forth. turning you up when you talk and the music down. not a big deal, but figured I'd share incase others felt the same way. thanks for the awesome vid.
I can't believe I just now found your channel... I don't know what rock I've been under to have missed this for so long! BTW, that show you were on... sucked out loud without you. I stopped watching it when you were no longer a part of it.
Bought this 6 years ago added the HD kit to it since I do bend .250 wall sometimes. It came and I didn't even bring it into to garage I opened it up laid it out on the tailgate rolled the welded out close enough for the leads to reach tacked it up gave it a quick check with a square and welded it up . It took less than 30 minutes from start to finish. The bender is keyed to fit together so it pretty much puts itself together. They designed it to use the harborgreight air over hydro ram which is very cheaply priced and has worked for me for 6 years . All the tube on my internal and exo were bent with this in a driveway as was the full hydro mount.
I'm totally off topic here but I have to tell you that I saw you on a few episodes of Bleeping Jeep and wondered "Who is this Ian guy"? Then, just by chance I was browsing through my streaming TV service and came across your show. I'm currently limited to a chair for the better part of the day to recover from having a new knee installed. I have binged watched your program for many days now. Thank God. This recovery would be very boring. Now that I've found your RUclips channel I can be assured of many more learning experiences in the future. By the way, you did a great job on that TV series. You can talk and weld a the same time and that's not an easy task. :)
Great video man. I don’t know if I’m partial just because I’ve been learning from you for years but there’s something about your way of explaining things that just makes sense and seems easy. Keep on keeping on bro!!! 🤘😎
I am in the process of finishing my Rogue Fab bender right now. Bought it to bend a cage and stuff for my M715 Project which i am taking lots of tips from project Lockjaw. Cant decide if i want to bob the bed or not. (probably will, looks awesome)
@@BigTireGarage I haven't had cable for 6 years but I do have RUclips and that new Motortrend app. Truly an awesome program and watching any of your channels your explanation of what you are doing is spot on.
Rogue fab bender might work really well and do a good job but it just seems to be a lot of work to get a new die in and each tube setup. Maybe it's just a personal preference is the JD squared style bender. Good advice on the assembly and welding of the bender. Best of luck and keep up the good work.
I had a JD squared model 4, built like a brick ...house. I didn't use it much, so I traded it to someone. I've been wanting a bender for a while, this looks interesting. I've pondered making my own JD2/Hossfeld bender since I've got a plasma table and machine tools.
@@BigTireGarage Yeah, seems like of like the razor and blade model, except the razor and the blades aren't cheap! I was thinking of making stacked laminations from sheet steel, with a skeleton to support the laminations. I've seen continuous laminations on roll benders, but not a skeletonized lamination.
It is actually not cheaper...this kit come with one 180 degree die of your choice. The JD is manual, and you have to then buy a die which makes it almost the same price.
I had the jd2 its a good bender I agree, people always seem to forget to include dies when pricing a bender..I like verticle plane benders, I find it easier to make flat hoops when working alone
Sick build!! What kind of gloves are one wearing in this video the seem nice. Heavy duty enough to mig weld with yet they have enough dexterity for you to put the bolts in the tube clamp
@Ian I am looking at bender options but buying multiple dies is a huge upfront cost - if you were to recommend on size what would it be - I am think 1.75" DOM for roll cages but what radius?
Have been a Big fan ever since you started on Xtreme 4 by 4, and I have some Questions, Which is better 3 link or 4 Link in the front, building a 98 XJ have a set of Dana 60's out of a 78 Ford highboy to install under it. Looking for a good set of coil overs,
Awesome videos so far, can't wait for more. Could you comment on what welding table you were using in this video? Is it also a pre-cut you-weld design like the Rogue bender?
these are twice as much as the JD2 benders that are a full assembly not a DIY kit.. i dont think anyone buying a tubing bender is going to mind a bit of welding in the assembling process but i mean what are the advantages of this bender for the extra money and the chance you could mess up the welds while assembling
@@BigTireGarage the dies are pretty similarly priced between each bender? 400$ for the jd2 and 200-350 per die this is 875$ for the machine with one die
I just found your new channel. It looks good, but you need to turn the music down a bit. I am having to play with my volume button too much. Maybe a lapel mike would help.
Not really I have this channel and then I have my stuff on Amazon Prime, and then my production company handles the distribution on 4 other shows on Amazon. Then I have FourWheeler on Motortrend, so it is a busy schedule to say the least
Good video :) , but personally tubing benders are seriously over priced for what they are and considering you spend the same on a die as the whole tool... if only i was in the US sure i could pick one up cheap
Wow! $725 for a kit you have to weld together? Should have used your tools and fab skill to make your own bender for less money. Love that you are putting out content though. Keep it up.
Even if you spent the time to cut out all the plate needed to make your own bender frame. The money would be in the actual bending die. Trust me I have priced this many different ways and this is one of the best options for the money.
Tried to watch this video but the music got to be too much, why does everyone think they have to add “action” music to a video, if you insist on background music,turn it down about 5 notches and leave it in the background.
You could design your own bender, but to be honest by the time you had the dies machined and all the plates laser cut or plasma cut you would have more into it than the 700 bucks this kit cost
Well, to compare apples to apples..the Woodward fab bender is 350, plus 120 for the stand, plus 350 for a die...and the Rogue is 715 with a die, and isn't a manual bender its a better deal by far
@@BigTireGarage Maybe in the shop But not online as there is many people with hard of hearing and a lot of music is offensive to many especially older folks Besides it is not polite to indulge in music when talking is on
I think your auto correct is broken, I know you meant to type "man look at that hair, he has good growth on that' font worry I make typos too sometimes
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Hey Guys, sorry for the delay in getting a new video uploaded. With FourWheeler in full swing it is hard to find the time I need to get these videos out, but I now think I have the time to get into a groove over the next few months.
You mean sorry for cranking up that music while instructing
I was wondering if you'd come back to YT after showing up on Motor Trend 😀
Yep, Just been a busy year new shop, new show, and a ton of work
@@BigTireGarage Busy is good! Glad you're getting these opportunities.
@@janeblogs324 I loved the music. I work while watching sometimes. I played the video twice, just because of the music. Kept me moving!
IAN!!!! Dude, you have no idea how happy I am to have found your youtube channel! I grew up watching you and Jesse on Powerblock every Saturday morning. You two were a huge inspiration for me. I really hope you are doing well and look forward to watching your videos.
I have been watching you for a long time, over 15 years easy, and your skill and willingness to teach others a cheaper alternative is what makes you awesome in my opinion!
Thanks for watching
I have one of these, it really is as easy as Ian makes it look. Fit up is great and well thought out
Good little bender that doesn’t take up a ton of room in the shop when bending tubing.
A new video from Ian hell yeah 🤙🏻
Yeah sorry for the delay, been a busy winter and honestly struggling with how to treat this particular channel because I now have so many video channels
@@BigTireGarage where is your main content going so we know the best way to support your channels?
I would enjoy a shop tour video of your new shop. I watch four wheeler every time its on TV. Thanks
Thank you, once I get all my tools moved into the new BTG side of the building I will definitely do that
THANK YOU SO MUCH!!!! A MUST-HAVE FOR ANY WORKSHOP!!!! GREAT VIDEO AND EDUCATION. THANKS FOR SHARING!!! I LOVE IT!!!! SOMETHING TO CONSIDER THIS HOLIDAY SEASON!!!
Post when you can and we’ll watch. We can keep up with you one place or another. 😎
I cannot believe the great algorithm grants upon thee, IAN of past Xtreme’s!
SICK!!
Thanks for watching the video, and thanks for watching all the shows. Be sure to catch FourWheeler on Motortrend and Big Tire on Amazon
I used different plans to make my own bender years back. But it was a very gratifying experience. this one looks alot more simple and easier to build. Good video tho!
That’s an awesome build. Very different I’m sure everyone says wow when they see it!
That rouge bender can also be converted too a legit mandrel bender! Definitely what sold me on it.
You are Awesome!!!!!!! Thank you so much for bringing this to my attention!!
just ordered one of these. can't wait for it to show up and begin my bending. thanks for the video. should help me out a lot with assembly. my only complaint would be having to adjust the volume back and forth. turning you up when you talk and the music down. not a big deal, but figured I'd share incase others felt the same way. thanks for the awesome vid.
Glad I could help!
Great to see you are doing OK. I have always wanted a nice bender I will have to look into this product. Thanks
I am very happy with this one
QUESTION: What are you usually watching on your phone while filming? I always see it playing in the background. Keep up the amazing content!
I can't believe I just now found your channel... I don't know what rock I've been under to have missed this for so long! BTW, that show you were on... sucked out loud without you. I stopped watching it when you were no longer a part of it.
Excellent how to video!
I NEED TO GET ONE FOR MY SHOP.
Bought this 6 years ago added the HD kit to it since I do bend .250 wall sometimes. It came and I didn't even bring it into to garage I opened it up laid it out on the tailgate rolled the welded out close enough for the leads to reach tacked it up gave it a quick check with a square and welded it up . It took less than 30 minutes from start to finish. The bender is keyed to fit together so it pretty much puts itself together. They designed it to use the harborgreight air over hydro ram which is very cheaply priced and has worked for me for 6 years . All the tube on my internal and exo were bent with this in a driveway as was the full hydro mount.
Awesome, it really is a great bender and such a fun project
I'm totally off topic here but I have to tell you that I saw you on a few episodes of Bleeping Jeep and wondered "Who is this Ian guy"? Then, just by chance I was browsing through my streaming TV service and came across your show. I'm currently limited to a chair for the better part of the day to recover from having a new knee installed. I have binged watched your program for many days now. Thank God. This recovery would be very boring. Now that I've found your RUclips channel I can be assured of many more learning experiences in the future. By the way, you did a great job on that TV series. You can talk and weld a the same time and that's not an easy task. :)
Thanks for watching!!
Great video man. I don’t know if I’m partial just because I’ve been learning from you for years but there’s something about your way of explaining things that just makes sense and seems easy. Keep on keeping on bro!!! 🤘😎
Thanks for all the years of watching
Always enjoy your work! Thanks Ian
My pleasure!
thanks Ian i always learn from your videos
Thanks for watching
I am in the process of finishing my Rogue Fab bender right now. Bought it to bend a cage and stuff for my M715 Project which i am taking lots of tips from project Lockjaw. Cant decide if i want to bob the bed or not. (probably will, looks awesome)
Watched you on PowerNation today...
Are the good old days...
Thanks for watching, be sure to catch the new FourWheeler on Motortrend
@@BigTireGarage got them all on DVR!!
@@BigTireGarage I haven't had cable for 6 years but I do have RUclips and that new Motortrend app. Truly an awesome program and watching any of your channels your explanation of what you are doing is spot on.
Perfect demonstration to say the least...
Rogue fab bender might work really well and do a good job but it just seems to be a lot of work to get a new die in and each tube setup. Maybe it's just a personal preference is the JD squared style bender. Good advice on the assembly and welding of the bender. Best of luck and keep up the good work.
I would agree with that....I don't change out dies too often. I really only use one or two tube sizes
I had a JD squared model 4, built like a brick ...house. I didn't use it much, so I traded it to someone. I've been wanting a bender for a while, this looks interesting. I've pondered making my own JD2/Hossfeld bender since I've got a plasma table and machine tools.
The dies is where it gets tricky
@@BigTireGarage Yeah, seems like of like the razor and blade model, except the razor and the blades aren't cheap! I was thinking of making stacked laminations from sheet steel, with a skeleton to support the laminations. I've seen continuous laminations on roll benders, but not a skeletonized lamination.
Hey man! Nice video! 👊
Thanks Nate, love your content
Little tip you should clear coat it after the stickers are on so they have more protection
I like that idea
Good to see ya.
Great video bud. Glad to see you back. Hoping for more on here from you. I don't really support the big conglomerate channels
Seems pricey for a bender i have to build and shim the dies?
JD is cheaper and been around for a while, just my $.02
It is actually not cheaper...this kit come with one 180 degree die of your choice. The JD is manual, and you have to then buy a die which makes it almost the same price.
Big Tire Garage ok, still prefer the JD bender design. To each his own
I had the jd2 its a good bender I agree, people always seem to forget to include dies when pricing a bender..I like verticle plane benders, I find it easier to make flat hoops when working alone
Friend it is really good artical, are you selling the DHF file this project, please confirm .
You can buy the kit from Rogue Fab
Hey Ian have you ever thought about having a contest to come wrench with you for a couple days that would be pretty sweet if you did.
I like the idea, maybe something we think about in the future
I definitely think this is on my future. Ian, what’s the deal with Ramcharger? Upcoming project? 🤞🏻
Built it on FourWheeler
Sick build!! What kind of gloves are one wearing in this video the seem nice. Heavy duty enough to mig weld with yet they have enough dexterity for you to put the bolts in the tube clamp
How many pins does this one use, and what sizes are they?
It uses two pins and I believe they are 5/8, but it uses roller dies not fixed dies so the load on the pin is lower
@Ian I am looking at bender options but buying multiple dies is a huge upfront cost - if you were to recommend on size what would it be - I am think 1.75" DOM for roll cages but what radius?
Have been a Big fan ever since you started on Xtreme 4 by 4, and I have some Questions, Which is better 3 link or 4 Link in the front, building a 98 XJ have a set of Dana 60's out of a 78 Ford highboy to install under it. Looking for a good set of coil overs,
Looking good! Curious how you like it. I've heard good and bad. Trying to decide where to spend my money when I finally get one.
I think I may upgrade to the hydraulic cylinder kit in the future
Yeahhhhhh. Thanks Ian
If you want to covert a JLU to an ORI suspension is using a coilover conversion kit a good approach by substituting the ORIs for the coilovers?
What are the plans for that ramcharger though?!
Its gonna be an expedition travel type rig
Awesome videos so far, can't wait for more. Could you comment on what welding table you were using in this video? Is it also a pre-cut you-weld design like the Rogue bender?
Yes, it is a Fab Table from Artec industries
Is that a Baja Bug in the back? Or a UTV with a Bug body?
UTV with bug glass
these are twice as much as the JD2 benders that are a full assembly not a DIY kit.. i dont think anyone buying a tubing bender is going to mind a bit of welding in the assembling process but i mean what are the advantages of this bender for the extra money and the chance you could mess up the welds while assembling
When you compare the price including dies this one is cheaper than the JD2 bender.
@@BigTireGarage the dies are pretty similarly priced between each bender? 400$ for the jd2 and 200-350 per die this is 875$ for the machine with one die
How much? Always start with cost. Otherwise it's just a nice video to dream about 👍
There are a lot of options to choose from...but it starts around 700 bucks
I just found your new channel. It looks good, but you need to turn the music down a bit. I am having to play with my volume button too much. Maybe a lapel mike would help.
I actually love the music from this! While building my barn, I was cranking the work out! Just an opinion...
Music is always key when working
moving the mounting point on the bottom of the jack would of solved you clearance issue clarance
I thought of that I didn't want to lower the jack at all
Hey is there a list of your RUclips channels
Not really I have this channel and then I have my stuff on Amazon Prime, and then my production company handles the distribution on 4 other shows on Amazon. Then I have FourWheeler on Motortrend, so it is a busy schedule to say the least
That poor ESAB welder was so dirty! :-D
Because it gets used A LOT!!!!!
Big Tire Garage that’s what she told me...🤭
Thats bad ass for lack of a better description. Can you get square dies
I believe you can
What's up Ian.
Just cutting and grinding and building stuff
@@BigTireGarage I've been looking forward to you getting back in the shop.
Good video :) , but personally tubing benders are seriously over priced for what they are and considering you spend the same on a die as the whole tool... if only i was in the US sure i could pick one up cheap
The dies are the most expensive part for sure....
I bet that Roguefab 600 couldn't bend that hair though. Unbendable.
👍
What Ian uploaded a video?
I understand that you are super busy with work and family.
Yeah it has been crazy busy, but my plan is to get more regular on here now
@@BigTireGarage totally understand that Ian.
You should do a shop tour now that you are in your new one.
Lol didnt wanna show the fight for those other 3 washers...
Correct.....seemed a little awkward to show all that
@@BigTireGarage i get it, nice machine tho
Wow! $725 for a kit you have to weld together? Should have used your tools and fab skill to make your own bender for less money. Love that you are putting out content though. Keep it up.
Even if you spent the time to cut out all the plate needed to make your own bender frame. The money would be in the actual bending die. Trust me I have priced this many different ways and this is one of the best options for the money.
Who else stayed for the song
I think your auto correct is broken, I know that you meant to type "amazing" it is OK I make mistakes too
Ramcharger!
Yeah, that one is currently being built on FourWheeler on Motortrend. Going to be an expedition travel type rig
dudut, dudut, dudut, dudut, dudut...deeerrrn
Turn the music down next time
Tried to watch this video but the music got to be too much, why does everyone think they have to add “action” music to a video, if you insist on background music,turn it down about 5 notches and leave it in the background.
And I thought it was like a diy hence from scratch with a budget...
You could design your own bender, but to be honest by the time you had the dies machined and all the plates laser cut or plasma cut you would have more into it than the 700 bucks this kit cost
Big Tire Garage ok thanks for the tip! Keep up the great vids
You should come to my house and help me build a cage in my k5 to keep my kids safe!
wy paying so much for a tube bender when u can get a good one for 300$
What bender can you get for 300 bucks
@@BigTireGarage Woodward Fab Manual Tube Bender
i know its a great tube bender in ur video but a bit pricey
Well, to compare apples to apples..the Woodward fab bender is 350, plus 120 for the stand, plus 350 for a die...and the Rogue is 715 with a die, and isn't a manual bender its a better deal by far
Bagged. Comanche.
Working on it, right now
Music is too loud and unnecessary.
Great content.... Music sucks.. Not necessary.
But I really like music
brain dead music
why?
when it's not needed
Music is always needed...you work in the shop without music?
@@BigTireGarage Maybe in the shop
But not online as there is many people with hard of hearing and a lot of music is offensive to many especially older folks
Besides it is not polite to indulge in music when talking is on
Whats the worst part of this video the loud music....Whats the easiest way to wreck your video ? Loud music!!!!
The music was atrocious.
I think your auto correct is broken...awesome is spelled awesome
Big Tire Garage you can’t make everyone happy with music that’s for sure
@@BigTireGarage That's the best reply to a comment I've seen in a while. Subbed
No accounting for taste, but music was way louder than your voice, Ian.
Music is unbearable
It appears your auto correct is broken as well, I understand that you meant to type "unbelievable" its OK I make mistakes sometimes too
WTF IS UP WITH HIS HAIR? Are there any grown Men around?
I think your auto correct is broken, I know you meant to type "man look at that hair, he has good growth on that' font worry I make typos too sometimes
Nice video but why that fkn music !!