EP.7 1995 Nissan D21 Hardbody gets new steering column & WHEEL! PT. 2

Поделиться
HTML-код
  • Опубликовано: 9 авг 2023
  • Today I finish up the steering column by getting the wires tied down and not rubbing. Then I tackle the job of prepping the new hub, adapater, and Momo steering wheel.
    Please enjoy.
  • Авто/МотоАвто/Мото

Комментарии • 18

  • @darrend4968
    @darrend4968 Год назад +1

    Great explanation on the steering wheel/spacer. Thank you!

    • @jolede029
      @jolede029  Год назад

      Thank you so very much. Thank you for watching.

  • @BoostedPastime
    @BoostedPastime 7 месяцев назад +1

    Thank you for making this content!

    • @jolede029
      @jolede029  7 месяцев назад +1

      Thank you very much. I have a lot of fun shooting the videos. Thank you for watching.

  • @ruggledug
    @ruggledug Год назад +1

    Very interesting!

  • @psementalist
    @psementalist Год назад +1

    I'm getting ready to put a NRG steering wheel with detachable quick release on my 96 Ford Probe

    • @jolede029
      @jolede029  Год назад

      That is very cool. Remember to disconnect the battery if it has an airbag. You may need a resistor to go in its place so you don’t have a warning light on your dashboard. NRG sells them. Anyway, good luck and be safe. Take care.

  • @humbertoreyes6510
    @humbertoreyes6510 6 месяцев назад +1

    🎉

    • @jolede029
      @jolede029  6 месяцев назад +1

      Thank you very much. Thank you for watching too.

  • @Damnsun720
    @Damnsun720 9 месяцев назад +1

    Hey boss by chance do you feel like the wheel is closer or farther from you compared to the stock wheel? Thank you

    • @jolede029
      @jolede029  9 месяцев назад

      Hello, well the wheel is not a deep wheel at all. So you see in one of the videos my there was not much room for my hands between the steering wheel and the turn signals and such. So when I added the spacer it is perfect and would say it is at the factory level. If I had to do it over I might look for a dished wheel, but my setup turned out really nice. And having the flatter wheel makes it more user friendly if I wanted to add a steering wheel buttons later. Thank you for watching.

    • @Damnsun720
      @Damnsun720 9 месяцев назад

      Sounds awesome! Personally I’m 5,5 so I don’t want the wheel too close but I’m going with the quick release for theft concerns. Love the set up btw🤘

  • @fantasticbrothers6332
    @fantasticbrothers6332 8 месяцев назад +1

    Hi i have njssan pathfinder 1992 is it same installment? And can u send me the link of the steering wheel i need to use that can fit my car

    • @jolede029
      @jolede029  8 месяцев назад

      Hello, thank you for watching. With the 92’ model in am not sure, I think it is the same but I think in 93 or 94 they did a slight redesign on the the upper column, it should work but make sure to do your research. I went on eBay to find mine. You could go on eBay or a salvage yard. If you see on buy it, don’t wait. Every year all of these parts get harder and harder to find. I hope this helps. So far it is a toss up between adding a tilt wheel or power steering that has changed my life the most. More videos very very soon. Thank you again for watching.

  • @mr.ls-s860
    @mr.ls-s860 11 месяцев назад

    Nice work. Where did you get the column?

    • @jolede029
      @jolede029  10 месяцев назад

      Hello, I got it off of eBay. It was from really nice truck that had tilt. I paid $250 with free shipping. It is so so nice. I am so very happy I put the tilt in there.

    • @mr.ls-s860
      @mr.ls-s860 10 месяцев назад

      Ok thanks