just do super noodle, you can put a bit of water in a bowl, the noodle at flavour packet, microwave for 2 mins, take out and stir, 2 more mins then its ready to eat
Love the content but a quick bit of advice maybe you should use the kettle to make your pot noodles. Really amazing achievement loading your own load that you aren’t familiar with driving you should be happy with yourself. Ever since I started watching you it has inspired me to try and get a truck and make it into what you have your truck as a show and work truck.
Really enjoyed that 👏 I’ve been in the job since 1985 and do around 1800 excavator & plant move a year and I still get the buzz you got from your first one, here’s to many more for you 🤙
Tim I’m just wondering have you been to Scotland the day of this comment? I caught a glimpse of a white lorry with blue frames like yours. Then a bit after i heard the popping of an exhaust. So im not sure if it was you or just a random person?
Always scary when you do something for the first time, i remember doing excavators at gap and the foreman said just drive it on and off dont stop. still crapped my pants on the first one. you did well tim great vid
Yesssss Tim! Proper trucking! You thought of doing longer videos when you've got a long slog on? Get some royalty free music in a playlist and could do an extra video maybe
Pleasure to meet you Tim at convoy my son got a signed picture and you v8 is a beaut cheers Tim keep up the good videos and carry on inspiring others to get into trucking
Tim, you need some supporting legs to the back of the trailer. It seems to flex down even a quite a bit with that 15 ton excavator going up and down the ramps. I work with machinery transports daily and I use the support legs every time I have to load or unload over a 10 ton machine.
With a bit more practice you will get the hand of driving the diggers. My advice would be to learn to control the tracks with your feet so you can use the arm to help you get off and on by placing the bucket on the floor then lift it up as you go over the beaver tail so helps with that dreaded drop that happens and good practice for the bigger machines.
use thick rubber mats, especially over the crest of the bed onto the ramps to protect the bed, also in wet weather metal on metal slides like fk and will catch you out. I had one slew on the crest and slip off the side when I was new to it and you get no warning. Also, use the arm to steady yourself and lift the digger, ie. if you're taking one off, extend the arm beyond ramps and place it on the ground, then pull the arm in while moving your tracks forwards - if you use both levers in sync then the arm will stay sat on the ground where you placed it and it basically pulls/drives the digger out whilst keeping it level so you don't have to worry about the crest onto the ramps. You do this until the centre of gravity of the digger passes the crest/pivot point between the bed and the ramps, then slowly lift the arm (but keep it on the ground) which will lower the front half of the digger onto the ramp slope without you needing to worry about it. Then once you're sat squarely on the ramps you can just drive it off. You can also do it facing the other way round by placing the arm (with bucket) on the bed and use that to pivot you and lift you over the crest, but make sure your bucket is wide enough to sit across the chassis members - don't do this on the wooden bit as it won't end well for you lol. Don't just check that the arm is secure, also check the roof of the digger as this is often when the vandal covers are stored and they're often not secured properly, so you're blatting down the A1 and they blow off into the traffic behind. They're big and metal and cause a lot of damage if they hit something. Also never never never walk under/behind unsecured ramps on a beavertail trailer like you're doing in this video. If a hydraulic hose splits or the ram fails just as you're walking past, that's half a ton falling on you and you're dead.
Loved doing machinery transporting, it's great when you're carting big gear. Full time in an excavator now, she's 50ton so takes a decent unit to shift it
Tim. Get some Overalls and keep them in yer box. Used to have some when Stripping Tilt Trailers in the 80s. It keeps your Civi's clean. Keep that Content Coming Mate.👋
Video idea for you Tim: Go and be Shaun's pit crew/tea boy at one of his Superkart rounds. I was watching him race on RUclips a few weeks ago, looks like a fun day out.
Love it i was at truckfest peterborough when scania launched the 4 series and now tim is guna build one how epic i won a scania yellow scania mug on the day to lol 💙💙
Must of had nerves of steel loading that digger would of been a nervous wreck loading that myself. Looking forward to the 4 series build unit looks mint, its come on really well.. Have a good week Tim 👍
Bloody hell did I just hear you say you’re gonna add power to that their Scania? Hope you do USA out. Or you can ask your friend to borrow his DEF motor for your Scania. It seems like it has power.
😂😂 great video Tim. Your unit is gonna be a awesome for the new content.i felt the same excitement with shaun when he saw the traffic light.. keep it coming mate
Hi Tim, love the videos. I live in Norfolk and love my trucks, always wanted to drive them but never had the confidence! Could I meet up with you one day and see the truck and get an idea about the job? All the best, Liam
Awesome video maté very entertaining as always especially when you and Shaun get together you definitely need a beer fridge mate I can see you being there very late when you get into restoring the 4 series all the best mate 😊
Good video Tim keep up the good work mate can’t wait to see more on the 4 series it’s miata boy btw changed my username also can’t wait for the dyno I’m gonna guess 600-680 HP and an idea get a cover for the beacons then take the cover off when you get to a show
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
What you guys done to that pot noodle was criminal
A Pot Noodle is criminal 😂
just do super noodle, you can put a bit of water in a bowl, the noodle at flavour packet, microwave for 2 mins, take out and stir, 2 more mins then its ready to eat
Nice to see some heavy equipment on the channel, job well done all the best for you and your family and the Trucker Tim franchise. SCANIA 4 LIFE 🙏🙏🔥🔥
Awesome video Tim & Shaun. You need a beer fridge for the late nights on the 4 series.
Yes we do ! Asap! Cheers Adam 👍👍
tim ,tip,check weather app prior to washing truck.
Love the content but a quick bit of advice maybe you should use the kettle to make your pot noodles. Really amazing achievement loading your own load that you aren’t familiar with driving you should be happy with yourself.
Ever since I started watching you it has inspired me to try and get a truck and make it into what you have your truck as a show and work truck.
Thanks so much, I was so nervous loading the digger 👍👍
AHHHH so proud!!!! The trip to Scotland was worth it!
Thank you, I actually remembered what you taught me 👍👍🤣
The two of you are incredibly fun to watch!
Really enjoyed that 👏 I’ve been in the job since 1985 and do around 1800 excavator & plant move a year and I still get the buzz you got from your first one, here’s to many more for you 🤙
Glad to see that work is returning on the 4 series
Tim I’m just wondering have you been to Scotland the day of this comment? I caught a glimpse of a white lorry with blue frames like yours. Then a bit after i heard the popping of an exhaust. So im not sure if it was you or just a random person?
Always scary when you do something for the first time, i remember doing excavators at gap and the foreman said just drive it on and off dont stop. still crapped my pants on the first one. you did well tim great vid
Yesssss Tim! Proper trucking! You thought of doing longer videos when you've got a long slog on? Get some royalty free music in a playlist and could do an extra video maybe
Pot noodle TOP TIP. Follow instructions then pop it in micro for 50secs. Absolutely superb.👍
To me to you chuckle brothers.What a combo you two are. The unit is looking awesome.
Bit of advice, hey some bigger spanners. And a 3/4 drive and inch drive socket set. A good impact gun and compressor ❤
Pleasure to meet you Tim at convoy my son got a signed picture and you v8 is a beaut cheers Tim keep up the good videos and carry on inspiring others to get into trucking
Tim, you need some supporting legs to the back of the trailer. It seems to flex down even a quite a bit with that 15 ton excavator going up and down the ramps. I work with machinery transports daily and I use the support legs every time I have to load or unload over a 10 ton machine.
Another great video tim always watch them after school
With a bit more practice you will get the hand of driving the diggers. My advice would be to learn to control the tracks with your feet so you can use the arm to help you get off and on by placing the bucket on the floor then lift it up as you go over the beaver tail so helps with that dreaded drop that happens and good practice for the bigger machines.
Cheers Elgan, I would like to have a go at a bigger machine 👍
use thick rubber mats, especially over the crest of the bed onto the ramps to protect the bed, also in wet weather metal on metal slides like fk and will catch you out. I had one slew on the crest and slip off the side when I was new to it and you get no warning. Also, use the arm to steady yourself and lift the digger, ie. if you're taking one off, extend the arm beyond ramps and place it on the ground, then pull the arm in while moving your tracks forwards - if you use both levers in sync then the arm will stay sat on the ground where you placed it and it basically pulls/drives the digger out whilst keeping it level so you don't have to worry about the crest onto the ramps. You do this until the centre of gravity of the digger passes the crest/pivot point between the bed and the ramps, then slowly lift the arm (but keep it on the ground) which will lower the front half of the digger onto the ramp slope without you needing to worry about it. Then once you're sat squarely on the ramps you can just drive it off. You can also do it facing the other way round by placing the arm (with bucket) on the bed and use that to pivot you and lift you over the crest, but make sure your bucket is wide enough to sit across the chassis members - don't do this on the wooden bit as it won't end well for you lol.
Don't just check that the arm is secure, also check the roof of the digger as this is often when the vandal covers are stored and they're often not secured properly, so you're blatting down the A1 and they blow off into the traffic behind. They're big and metal and cause a lot of damage if they hit something.
Also never never never walk under/behind unsecured ramps on a beavertail trailer like you're doing in this video. If a hydraulic hose splits or the ram fails just as you're walking past, that's half a ton falling on you and you're dead.
Loved doing machinery transporting, it's great when you're carting big gear.
Full time in an excavator now, she's 50ton so takes a decent unit to shift it
Tim. Get some Overalls and keep them in yer box. Used to have some when Stripping Tilt Trailers in the 80s. It keeps your Civi's clean. Keep that Content Coming Mate.👋
I work in with plant you did good it was fun to watch this! Keep up the plant work stay safe sir
Well done Tim 👏 and nice to see u up my neck of the woods
Fair play Tim, you chained that up pretty good too
COME ONNNNN TIMMY BOI !!!!! and cant wait to see u work on the 4 series and see the trailer done
love the videos cant wait to see how far you come!
The new chuckle brothers
Keep up the good work guys
Cracking video and good job moving the digger. Looking forward to seeing the videos on the r series
Thanks 👍
Need to get yourself a minifridge for the unit Tim! Can't have cold ones with the bois if they ain't cold!
Think Shaun needs a set of blasters for the D...D....D....DAF wrecker,for putting up with you!
Hi Tim! There will soon be a truck meet in Skåne Sweden! And it would be really fun if you could come up and show off your truck there!
That would be cool!
Video idea for you Tim: Go and be Shaun's pit crew/tea boy at one of his Superkart rounds. I was watching him race on RUclips a few weeks ago, looks like a fun day out.
You did well with that digger! Looking forward to.the 4 series resto!
Remember reverse on drive off and tuck that boom right down 👍👍
Love it i was at truckfest peterborough when scania launched the 4 series and now tim is guna build one how epic i won a scania yellow scania mug on the day to lol 💙💙
Sean needs to be in the videos more you two make me laugh when you're both together (chocolate finger) 😂😂
🤣🤣 He does! We do have such a laugh!
@@TruckerTim thanked tin
Well done Tim you make my day
👍👏
Brilliant video time glad things are working out well for you onwards and upwards pal 👍👍
I can just see you and Shaun spending most nights there eating pot noodles and drinking beer and just having a good ol boys night out in the unit
Must of had nerves of steel loading that digger would of been a nervous wreck loading that myself. Looking forward to the 4 series build unit looks mint, its come on really well..
Have a good week Tim 👍
You need a beer assistant… looking good Tim love that v8 sound armed with the rolling coal 💨💨💨💨
Well done with the loading Trucker Tim. 👌👌👌💪💪💪🤜🤛👏👏👏
The digger dealers is in our village, if we’d known you were coming we would have come down and said hello 😊👍
Bloody hell did I just hear you say you’re gonna add power to that their Scania? Hope you do USA out. Or you can ask your friend to borrow his DEF motor for your Scania. It seems like it has power.
Hi Tim, I’ve done low loader work for a rail company delivering all sorts of machines so if you ever need anything please let me know 🤙
It's a good day whenever Tim posts. Loved the video Tim! Really enjoyable! ❤😁👍
It's is good to Shaun back on your road 🛣️ videos Tim 👍
Love the work Timbo hope to see you at truck fest
😂😂 great video Tim. Your unit is gonna be a awesome for the new content.i felt the same excitement with shaun when he saw the traffic light.. keep it coming mate
Love the traffic light ! Cheers Simon 👍👍
Well done TT Excellent every job is a experience
Content to make you smile, thanks Tim.
Careful moving plant mate especially excavators. Some require movement orders. Keep yourself right 👍
Top quality content as always when u 2 are together tim , absolutely brilliant 👏 👏👏👏👏👏👏
Hi Tim, love the videos. I live in Norfolk and love my trucks, always wanted to drive them but never had the confidence! Could I meet up with you one day and see the truck and get an idea about the job? All the best, Liam
Hey Tim fantastic video upload great way to end a Tuesday night with ur wonderful upload Happy trucking and can't wait for the next upload 😊
Ive been waiting ages for some 4series updates, might have to join the members only😄
Can't wait to see the 4-series build. Finally😂
Awesome video maté very entertaining as always especially when you and Shaun get together you definitely need a beer fridge mate I can see you being there very late when you get into restoring the 4 series all the best mate 😊
YES! We do need a beer fridge asap! 👍
Well done Tim ,another cracking video mate
There's defo a register for people that make pot noodles in the a microwave.... hahaha any closer to getting that T cab Tim ;)
Great vid Timbo, but they need to be longer .
Looking good TT! Was that pot noodle “content” or were you both being serious 😂 You both looked and said we’ve even got a kettle. 😂 Bloody brilliant
I can see Tim Nervous haha! YOU CAN DO IT!
Love your videos
Cheers Dylan 👍👍
Driffield is my hometown, keep her lit 🔥
great video as always Tim. look forward to the 4 series videos.
cheers Simgaming, great to be able to see some progress! 👍
Great video Sir you did great driving the excavator looking forward to seeing more videos
Love the colours of the truck
Looking forward to the 4 series but who's bringing it over shaun in a wrecker or is it coming on your lowloader tim
Just wondering have you not got legs that you spin round on the rear of the trailer when loading?
Hey Tim, why don't you put white or clear beacons on your truck and use blue bulbs instead, just an idea
Another Great Video Trucker Tim
finally the 4 series is getting more love that what I am here for cant wait
Kettle though 15:10 😂😂😂😂😂😂😂
Another spot on video boys and girl
Once again another amazing video looking forward to the next episode your truck sounds amazing very beefy you did well loading the digger
Thank you Craig, I was a bit nervous about loading on my own but luckily it went well 👍
Another great video on Tuesday, hopefully you will do more of these videos with excavators/bulldozers/tractors and trucks as well! #edit
Thank you, I would love to have a go at moving some more large machinery 👍👍
Dynamic duo together 👌👌👍
Loving the content Tim 💪
Thanks so much 👍👍
great video great truck great driver
Blidy great video tim. Love it. So funny aswell. Keep on trucking
Need a collection box in the unit for the beer tops to represent all the beers consumed
Silly question does your lorry run on add blue
Awesome video!!!
The next video will be a great one can't wait to see it 😅
Got u again Jamo 🎉🎉🎉
Lets goo so happy for a new video keep up the good work tim
TIIIIM, CHANGE YOUR BEACONS TO WHITE GLASS. LOOKS SUPER CLEAN AND KEEPS THE LAW AWAY😂 COULD HAVE BLUE FLARES W WHITE GLASS
Loving the traffic lights
3:00 THATS MY MUM 😂😂 (she defo loves it)
Peter Wright, what happened to my T-shirt?
Another great video, Tim already looking forward to the next one
I'm not a digger driver and I've loaded a machine on a flat bed, most neve racking thing. Grats!! 😂
Cheers jakobmudie, I was very nervous ! Hoping I will be more confident next time 👍👍
Tim u need to get a pair of brown boots and jeans to be a proper tang 🤠keep er lit love the videos and the lorry 😮💨
Good good Timmy boy hope u enjoy the digger I love my digger job just away to do my CPC so I can get on the road the noo to move them 🤙❤️
Hey Timmy where did u buy the underglow from? And do the ship to Holland?
Underglow was from Tranztech 👍👍 We do ship to Holland yes 😊
Man you are living the life haha makes me want to become a trucker!
Great job tim.
With the amount it costs to fill up the tank I`d love to know how much jobs are charged at.
Good video Tim keep up the good work mate can’t wait to see more on the 4 series it’s miata boy btw changed my username also can’t wait for the dyno I’m gonna guess 600-680 HP and an idea get a cover for the beacons then take the cover off when you get to a show
Good video tim
Buy clear beacons with orange bulbs or even get changeable bulbs for fun