Hot Tips - Calculating the Aortic Valve Area Using the Continuity Equation

[@rcq6823]

Excellent video Bridget, congratulations to Gulf Coast Institute, very informative in short time.

[@natigiraldo]

FINALLY a simple and great video! Completely understood!

[@jmarie8711]

The best video ever on this topic!!!

[@drgadham]

Excellent presentation 👌👌👌👌👌

[@JerungTheImbaPro]

thank you very much... very informative and simple

[@minkycat66]

Would have liked a closeup of exactly where you put the gate before dopplering the LVOT

[@nesrinslewa4815]

The doppler gate for LVOT, using PW, would be slightly above the aortic valve leaflets (Not on the tip of the valve leaflet, but slightly above the leaflets). Hope that helps

[@excalibur9768]

@@nesrinslewa4815 One should note a 'closing click' immediately after the LVOT waveform if you're in the optimal place.

[@emmanouilbagiartakis6689]

@@excalibur9768 exactly. without spectral broadening . that is the details/tips we expected the video to include .wasted time."hot tips" are in the comments unfortunately

[@ahmedsabbar9049]

@@emmanouilbagiartakis6689 when we measure the LVOT diameter, how the result we'll be used by machine with VTI of LVOT & A valve and give us the degree of stenosis

[@ahmedsabbar9049]

@@emmanouilbagiartakis6689 thank u

[@thefelper.7181]

Super!! 👍🏻👍🏻

[@eyas.n8860]

Great job , thanks

[@thangbui4073]

Thanks miss 😊

[@maryroseblancaflor2160]

Your Doppler is not aligned properly zoom lvot to measure it's more accurate

[@joefreakhouseful]

outstanding! Looks like im subscribing.

[@codrut913]

[@rafiqnabil7413]

EXCELLENT

[@aymantantawy1475]

very good

[@pankajmandloi4378]

tyy mam i m having same machine good explains tyy so much from dr pankaj mandloi love from indiaa

[@MyJani76]

I think the LVOT VTI measurement is not correct - interrogation angle is not paralell with the flow direction, see 3:19

[@prabirbasak3990]

excellent thank you

[@MahmudulHasan-rk6ze]

Would you tell,how to measure CSA?

[@elizabethsydes6974]

If you mean CSA of the LVOT, the machine calculates that based on your LVOT diameter :) see 2:50

[@hannaung1198]

Thanks

[@minkycat66]

Good, but taking the numbers and inputting the into the formula and doing the calculation would have made this video much better.

[@dramitsoni]

ALWAYS ZOOM to measure LVOT. SAYS both ASE and BSE.

[@abdelattyahmed9758]

very good