PROJECTION OF PLANES SOLVED PROBLEM 11 IN HINDI IN ENGINEERING DRAWING
HTML-код
- Опубликовано: 9 сен 2024
- Visit My Other Channels :
@TIKLESACADEMY
@TIKLESACADEMYOFMATHS
@TIKLESACADEMYOFEDUCATION
TODAY WE WILL STUDY PROJECTION OF PLANE PROBLEM NO.11
QUE : A CIRCULAR PLATE OF DIAMETER 60 MM IS KEPT ON THE VP ON A POINT OF ITS CIRCUMFERENCE. THE SURFACE OF THE CIRCULAR PLANE MAKES AN ANGLE OF 40 DEGREE TO THE VP. DRAW THE PROJECTION OF THE CIRCULAR PLANE WHEN DIAMETER PASSING THROUGH THE POINT ON VP MAKES AN ANGLE OF 30 DEGREE TO THE HP.
ALL PREVIOUS TOPICS LINK GIVEN BELOW :
ORTHOGRAPHIC PROJECTION,
• ORTHOGRAPHIC PROJECTION
ISOMETRIC PROJECTION,
• ISOMETRIC PROJECTION
PROJECTION OF POINTS,
• PROJECTION OF POINTS
PROJECTION OF STRAIGHT LINE,
• PROJECTION OF STRAIGHT...
PROJECTION OF PLANES,
• PROJECTION OF PLANES
PROJECTION OF SOLIDS,
• PROJECTION OF SOLIDS
SECTION OF SOLID & DEVELOPMENT,
• SECTION OF SOLID & DEV...
PLAIN SCALE,
• PLAIN SCALE
DIAGONAL SCALE,
• DIAGONAL SCALE
VERNIER SCALE,
• VERNIER SCALE
ELLIPSE,
• ELLIPSE
PARABOLA,
• PARABOLA
HYPERBOLA,
• HYPERBOLA
CYCLOID,
• CYCLOID
EPICYCLOID,
• EPICYCLOID
HYPOCYCLOID,
• HYPOCYCLOID
INVOLUTE,
• INVOLUTE (ENGINEERING ...
ARCHIMEDEAN SPIRAL,
• ARCHIMEDEAN SPIRAL
TANGENT AND NORMAL,
• TANGENT AND NORMAL
OBJECTIVE QUESTION IN DRAWING,
• ENGINEERING DRAWING | ...
FOR MORE OTHER TOPICS, PLEASE VISIT THE PLAYLIST-SECTION ON MY CHANNEL.
#projectionofplanes
#solvedproblemsinprojectionofplanes
#engineeringdrawing
#engineeringgraphics
#tiklesacademy
#projectionofstraightline
#projectionofsolid
#projectionofpoints
#isometricprojection
#orthographicprojection
Thanks sir tomorrow is my Engineering Drawing Exam
Sir ye last me 30 degree vla samajh me nhi aya
Jab kabhi bhi question Mein Diya hota hai ki diameter incline Hai tab aapko Hamesha Alpha angle find out karna Hota Hai. Aise Mein Hamesha is type ka construction karna hai. Agar diameter incline Bola To Hi Alpha angle find out karna hai but agar front view of diameter incline bola to aapko Alpha angle find out karne ki jarurat nahi.
@@TIKLESACADEMYsir, but in some problems u didn't find alpha angle... Even though the front view of diamter is not given
Thanks sir
Sir but isme 30 degree opposite side nahi lena chahiye tha ?? Like e upar aana chahiye tha na e sai cause diameter ki inclination di hai wrt to hp aur a fix hai to e upar jaana chahiye tha na
Excatly 😭 @@navyasriravuri8457
Jai Hind sir
Respected sir,
Please also upload this problem by auxillary plane method
Tbh this sir is 🥰
The last 30 degree angle , you have measured and drawn anticlockwise can we do it clockwise also?
Sir plz upload a videos on sphere, cone cylinder of M2 unit 5
Same Q did you find the solution ??
Perspective drawing par video bnaye
Ok
@@TIKLESACADEMY As soon as possible video bnaye sir exam near h.
Sir pls ye sol auxiliary me bhi upload kijiye
Sir, X Y line ke niche jo bhi points hoga wo sab ke upar dash nehi hoga matlab ayese hoga a, b, c?
Sir is example ko direct method se karna hai to same hi projection hoga kya ?? Means yahi method ?
Sir ap kis clg me padhate He???
A circular disk of 50 mm diameter lies on a point in the HPThe diameter is inclined at 45° to HP & 30° to VP. Draw its projection.
Sir Alpha angle kiase nikale nhi samjhe
Kraneel Kadu Mechanical engineering
Sir i have sent u mail.Could u Plz check it once
Yes. I got that.
Please ask your doubts regarding uploaded videos.
Sir i didn't have any doubts in uploaded video... But i want about intersection of solids with atleast 2 examples. And sir is it mandatory to write steps of construction for ellipse, hyperbola etc??
Sir mera golden kt hai ED ka konse topic karu pls bataiye
Jo topic aapko easy Lage vah topic pahle karo, lekin uska preparation karte samay sabse pahle check karo ki exam mein vah kitne Mark ke liye aata hai aur uske upar kaun se kaun se questions repeat hue hain uski aap pahle Ek list bnao then Usi ke according study karo. Previous 5 year ke question papers ko refer karo vahan se aapko most important questions mil jaenge.
@@TIKLESACADEMY thankyou sir 🙏
@@TIKLESACADEMY sir please helix ke video upload kijiye
Sir usme aame side view nahi pachta hai kya sir..
30 INCLINED to HP hai aapne 60 bana deeya sir ji
Sir why in circle you haven’t taken 12 points
Choice
Its his choice
A circular plate of diameter 60mm is kept on the V.P. on a point of its circumference. The
surface of the circular plate makes an angle of 400 to the V.P. Draw the projection of the circle
when diameter passing through the point on V.P. makes an angle of 300 to H.P.
Hindi m padhao sir