I also typically shoot steel's with my AT-X, and admittedly I shoot handloads, however with those it prints consistently under 0.25 moa. Love that thing.
I like the adjustable competition trigger which has been set to 2.5lb press weight (can be as low as 12oz with the light spring). I can only find fault with the adjustable cheek piece which, in my opinion, would be better served with a tool-less thumbscrew design (like on the KRG Whiskey-3 for example) rather than the 4mm Hex key (the USA issued user manual shows instructions for a cheekpiece height thumb screw which doesn't appear to be available in the UK). The length of pull adjustment is by the 4mm Hex key but the USA user manual also shows a LOP thumbscrew. My second gripe with the cheekpiece was the lowest setting is not low enough so I spent an inordinate amount of time evaluating different BH (build height) values for mounts (eventually settling on a 14mm BH value). The barrel does clean easily although it did take me most of an afternoon to follow the breaking-in procedure as detailed in the user manual. It was during our summer 'heat wave' so I wasn't exactly in a rush. Once 'broken-in' it didn't take long to get an acceptable 100m zero which printed a group less than 1cm (Lapua GB458 139gr OTM bullet, 41.5gr Vihtavuori N160, Lapua 6.5CM case (COL 2,800").
Yep... fair play Chris... that was a good review. Lot's of relevant detail and good clear explanation. Nothing wrong with expressing personal likes/dislikes, but facts and detail are what count and you got the balance spot on here.👍
Yeah I noticed this too. Kind of makes you wonder about the longevity and factory support for the design when they haven't even bothered to show it on the AINA website.
Key-slot, it is AI proprietary. Essentially, it is key-mod with a chamfer for the hardware to create a mechanical lock, rather than just a friction lock as key-mod does.
I also typically shoot steel's with my AT-X, and admittedly I shoot handloads, however with those it prints consistently under 0.25 moa. Love that thing.
I like the adjustable competition trigger which has been set to 2.5lb press weight (can be as low as 12oz with the light spring).
I can only find fault with the adjustable cheek piece which, in my opinion, would be better served with a tool-less thumbscrew design (like on the KRG Whiskey-3 for example) rather than the 4mm Hex key (the USA issued user manual shows instructions for a cheekpiece height thumb screw which doesn't appear to be available in the UK). The length of pull adjustment is by the 4mm Hex key but the USA user manual also shows a LOP thumbscrew.
My second gripe with the cheekpiece was the lowest setting is not low enough so I spent an inordinate amount of time evaluating different BH (build height) values for mounts (eventually settling on a 14mm BH value).
The barrel does clean easily although it did take me most of an afternoon to follow the breaking-in procedure as detailed in the user manual. It was during our summer 'heat wave' so I wasn't exactly in a rush. Once 'broken-in' it didn't take long to get an acceptable 100m zero which printed a group less than 1cm (Lapua GB458 139gr OTM bullet, 41.5gr Vihtavuori N160, Lapua 6.5CM case (COL 2,800").
Thank you. Just got one. Love it.
Yep... fair play Chris... that was a good review. Lot's of relevant detail and good clear explanation. Nothing wrong with expressing personal likes/dislikes, but facts and detail are what count and you got the balance spot on here.👍
Thank you
love the ai they are great rifles
Hi
Im going to buy this rifle but I now witch barrel I should chose 24" or 26"
What attachment did you buy to fit the Harris bipod?
A stud
Good review.british at its best.....like 50 years ago..
Were those 140 or 147gr eldm?
Uff.. 🔥🔥🤙
How come AI do not list the AT-X on their website or am I being blind?
Yeah I noticed this too. Kind of makes you wonder about the longevity and factory support for the design when they haven't even bothered to show it on the AINA website.
Is the action epoxied/bedded?
In the video
sick*
Key-Mod or M-lok?
Key-slot, it is AI proprietary. Essentially, it is key-mod with a chamfer for the hardware to create a mechanical lock, rather than just a friction lock as key-mod does.
Can you make key mod stuff fit somehow?
I guess you get what you pay for..Quality is never cheap..
a little high the rings
You said it Yoda