If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne
Hey there. Im building one now and im on number 10 ( it just started ) so i wonder during the proces so far i found that some screws dont fit. And im using different like if CM dont work ( its usually too wide hole for screw ) i use AM as a change but i need to oil the hole and work the bolt in little by little. Did you have any problems like that.
The "green and black" wires are both green! But as far as I have been told, there are diffent typs of colour vission issues. I'm awful with with all sorts of things, but I do have good colour vision ( can't spell for toffee. lol) Not seen any of this build before, as not a film that I have watched. Looking forward to the Christmas quiz, sounds like it should be lots of fun!
It's kinda hard to believe how expensive this kit is. I'm about to start an attempt to reproduce an all metal 1:12 scale 1969 Camaro kit ( Like Monogram's older 3 in 1 kit ), couldn't see it being anywhere near the cost of this 1:8 kit
Wayne, have you ever tried corrective glasses for your color blindness (like the ones made by companies like EnChroma)? They don't solve the most severe cases and have their limits but if you have a mild color blindness they could give you results (at least outdoor, they don't work very well indoor).
Can I just add mate that you forgotten to connect the brake line to the back axle as noticed is was still on bottom of the car ... it does say connect it when you put back wheels and axle on in last issues
I don't like how tight that speeker wire is, suerly it woould have been better if they (whoever they were) had designed the speeker to mount with the wires pointing towards the little PCB.
Good build do you no when you said your bismark is done hate to tell you that you have to take of the middle and back end of the ship off to put 2 brackets on should have been done long ago
I just got to this stage of the build, and I have a question: Have you or anyone else have had a problem of removing the battery cover? The screw/spring and washer all seem tight and strong. When I fit the cover on the base it does click in place and screws in okay. But when I try to remove the cover by turning the screw until it's all nice and loose, the cover will not pop off easily. I have to take a very thin screwdriver to pry it open. Even without the screw, the cover snaps in. The only way to remove it is using a toothpick (I think in the UK it's called a cocktail stick) in the screw hole to pop it open. Anyone have like experience? Suggestions?
@@WorldofWayneUK you only get four stage is there any more stage oh that’s it and you had to pay for all stage so how much it cost and thank you have a good day
Just a quick hack not telling you too suck eggs lol... see you put the wheel in hot water then put each side of the metal on when warm and screw together... its quicker to put the two metal ones and pin first then take hot tire out the water and just squeeze it over both rims... doing this with my kitt knight rider too sooo much easier matey.. ❤️ the shows and following ya
Hey Wayne. It's been about a month since the last video; are you having distribution- out of stock issues or are you just running behind? I ask only because I recently signed up for this build, and with both my track record, and the star I live under . . with Eaglemoss (9 months behind and climbing) and IXO now at about 2,, approaching 3 months, I get a little paranoid. So, I'm just curious.
I managed to watch james bond time to die last night I ended up paying a bit more on sky it was available to buy digitally as well as dvd but I won't get dvd until anytime after the 20th as thats when its officially released on dvd. Not the best bond film or the worst I've watched in fact it was enjoyable for the most part. No spoilers but I was kinda suprised how james bond ended
If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne
Like video
Hey there.
Im building one now and im on number 10 ( it just started ) so i wonder during the proces so far i found that some screws dont fit. And im using different like if CM dont work ( its usually too wide hole for screw ) i use AM as a change but i need to oil the hole and work the bolt in little by little. Did you have any problems like that.
The "green and black" wires are both green! But as far as I have been told, there are diffent typs of colour vission issues. I'm awful with with all sorts of things, but I do have good colour vision ( can't spell for toffee. lol) Not seen any of this build before, as not a film that I have watched. Looking forward to the Christmas quiz, sounds like it should be lots of fun!
A very good build video for this model.
Loving the build as all ways.
Stay Safe all.
It's kinda hard to believe how expensive this kit is. I'm about to start an attempt to reproduce an all metal 1:12 scale 1969 Camaro kit ( Like Monogram's older 3 in 1 kit ), couldn't see it being anywhere near the cost of this 1:8 kit
yes its cool playing around with electronics
Wayne, have you ever tried corrective glasses for your color blindness (like the ones made by companies like EnChroma)? They don't solve the most severe cases and have their limits but if you have a mild color blindness they could give you results (at least outdoor, they don't work very well indoor).
I should try them
Can I just add mate that you forgotten to connect the brake line to the back axle as noticed is was still on bottom of the car ... it does say connect it when you put back wheels and axle on in last issues
That is one very sad sounding horn.
But the car does look great.
I don't like how tight that speeker wire is, suerly it woould have been better if they (whoever they were) had designed the speeker to mount with the wires pointing towards the little PCB.
I would have hoped the sound would have been a LOT better than that! ☹
Good build do you no when you said your bismark is done hate to tell you that you have to take of the middle and back end of the ship off to put 2 brackets on should have been done long ago
Doh
Ocd will play you up
I just got to this stage of the build, and I have a question: Have you or anyone else have had a problem of removing the battery cover? The screw/spring and washer all seem tight and strong. When I fit the cover on the base it does click in place and screws in okay. But when I try to remove the cover by turning the screw until it's all nice and loose, the cover will not pop off easily. I have to take a very thin screwdriver to pry it open. Even without the screw, the cover snaps in. The only way to remove it is using a toothpick (I think in the UK it's called a cocktail stick) in the screw hole to pop it open. Anyone have like experience? Suggestions?
I haven’t even attempted it yet. I will let you know
I wish agrora would do a crown Vic
So when you buy one part do you had to buy another one or it cost free
You get 4 stages oer month and pay monthly for those 4 stages
@@WorldofWayneUK you only get four stage is there any more stage oh that’s it and you had to pay for all stage so how much it cost and thank you have a good day
hi wayne did you sort out your allen key problem
Yep. A set is on the way
Amazon I bet
The sounds from this are not that good, the horn sounds very weak, but it is good to see that all the parts you got were actually used,
Are you still building this? or waiting for more parts?
Still waiting on more parts
Just a quick hack not telling you too suck eggs lol... see you put the wheel in hot water then put each side of the metal on when warm and screw together... its quicker to put the two metal ones and pin first then take hot tire out the water and just squeeze it over both rims... doing this with my kitt knight rider too sooo much easier matey.. ❤️ the shows and following ya
Hey Wayne. It's been about a month since the last video; are you having distribution- out of stock issues or are you just running behind? I ask only because I recently signed up for this build, and with both my track record, and the star I live under . . with Eaglemoss (9 months behind and climbing) and IXO now at about 2,, approaching 3 months, I get a little paranoid. So, I'm just curious.
Funny enough I will have the next stages on the channel tomorrow
Like video
Don't worry about it too much. Once you have the right tools get back to it when you can
Wayne .... I can't remember , are you building this for someone or keeping it for yourself ?🤔
This one is mine
I managed to watch james bond time to die last night I ended up paying a bit more on sky it was available to buy digitally as well as dvd but I won't get dvd until anytime after the 20th as thats when its officially released on dvd. Not the best bond film or the worst I've watched in fact it was enjoyable for the most part. No spoilers but I was kinda suprised how james bond ended
Like video