Thanks for the good words, Daniel. The VIO project is amazing and I'm excited about the possibilities. I hope to get a Docker file together that could drastically simplify this process in the future. Take care.
Nice video. When you mention MAV_ODOM_LP has no effect...it actually does. Turning it on, allows you to just see the Odometry from just the T265. This allows you to verify your T265 is working properly. It also allows you to align the Quaternion. This is necessary so that the X and Y directions line up in the EKF2 calculations.
Hey Dennis can you do a video similar to this with the Oak-D camera and depthai ? I wasn't able to afford the t-265 at the moment so I purchased the Oak-D off Amazon for $250.00 and I have the camera working on the Jetson Nano but I was just wondering if you could do a video . So I could try to configure it myself but you have many more years of work in this area of expertise . I've used your code to get my drone off the ground and landed a few years back so I've been a follower . Just want to get things setup correctly , assuming I cannot use real-sense and ross with Oak-D . Also I have the Pix-Hawk Orange for the flight controller . Thanks
i want to ask you if you use telemetry or udp for communication with GCS, if so how do you solve the problem of GCS signal dropping when running all nodes
Hello, Thanks for your video, However I want to use this tutorial on ROS2 How can I make Pixhawk and QGC connect through WiFi? Because ROS2 doesn't use mavros so that I can't use 'bridge_mavros.launch' file and ''...
@@dennisbaldwin i'm doing the same with my pixhawk 2.4.8 with px4 latest firmware but the data in LOCAL_POSITION_NED seems to be very wrong and very fluctuating!!! can you please help
Thanks Dennis, this is a very thorough walk through.
Thanks for the good words, Daniel. The VIO project is amazing and I'm excited about the possibilities. I hope to get a Docker file together that could drastically simplify this process in the future. Take care.
@@dennisbaldwin How to use this setup for SLAM (Simultaneous Localization and Mapping)
Great video and explanation! I just got a T265 and will be testing this VIO system on an hexacopter! I'll keep you posted :P
I have watched it many times, thanks a lot, it really helps me a lot!
This is great! Thank you Dennis
Loved it
Nice video. When you mention MAV_ODOM_LP has no effect...it actually does. Turning it on, allows you to just see the Odometry from just the T265. This allows you to verify your T265 is working properly. It also allows you to align the Quaternion. This is necessary so that the X and Y directions line up in the EKF2 calculations.
Awesome video. Wonder how does your floor look like and if that will affect the efficiency.
Hey Dennis can you do a video similar to this with the Oak-D camera and depthai ? I wasn't able to afford the t-265 at the moment so I purchased the Oak-D off Amazon for $250.00 and I have the camera working on the Jetson Nano but I was just wondering if you could do a video . So I could try to configure it myself but you have many more years of work in this area of expertise . I've used your code to get my drone off the ground and landed a few years back so I've been a follower . Just want to get things setup correctly , assuming I cannot use real-sense and ross with Oak-D . Also I have the Pix-Hawk Orange for the flight controller . Thanks
I wonder how can someone make a flight controller with Jetson Nano!! Nice work!
i want to ask you if you use telemetry or udp for communication with GCS, if so how do you solve the problem of GCS signal dropping when running all nodes
Bro can you share detail of this project ? I need you help thanks
Hello, Thanks for your video, However I want to use this tutorial on ROS2
How can I make Pixhawk and QGC connect through WiFi?
Because ROS2 doesn't use mavros so that I can't use 'bridge_mavros.launch' file and ''...
hi, may I ask the are there two power sources: one for the jetson nano board, and the other for the motor ?
may I also ask what’s the size of the frame? where can find one :))
Sir my Pixahwak show
Prearm: baro : gps alt error 5786
What's a solution please help me
can i use this repo with monocular camera?
All that programing but for what? Just unstable hovering?
Which pixhawk model it is based on
It's based off the NXP FMUK66. You can learn more about it here: docs.px4.io/master/en/flight_controller/nxp_rddrone_fmuk66.html
@@dennisbaldwin i'm doing the same with my pixhawk 2.4.8 with px4 latest firmware but the data in LOCAL_POSITION_NED seems to be very wrong and very fluctuating!!! can you please help
Hi Dennis,
We wanted to connect with you for a project, can you please share your email? Thanks
Quality work pal. I am suprised that you haven't researched Promo>SM!