It's taken me hours to try and figure out how to get my TP-Link to work since I moved house, and I finally come to your video and fix it in minutes. Thank you so much!
Thank u so much sir for the crystal clear video..I was resetting it ..without connecting it in to the socket...and it was somehow taking the old Wifi name and generating new Extensions...Following the steps u showed above...I finally cracked into it....u r such a savior...have a great day !
It was super clear . The additional info is that , after connecting to TP Link extender , your anti virus may block it and hence it may not show the wifi network so better to put off anti virus for short while.
I got to that stage and mine wouldn’t connect to the internet browser. Instead, I pressed the ‘padlock’ button on the extender until the ‘RE’ light was flashing and pressed the WPS button on the router I wanted to connect it to. It then configured with the extender and I didn’t need to enter any details on a browser for it to connect.
This didn’t work for me. I copied the IP address but then the booster had no wifi. So it couldn’t go to the admin page. This is a booster left behind by a guest. I reset it fine. But that’s as far as I could get.
If my router is in 2nd floor and I connect the extender through LAN network cable and place the extender in ground floor, so speed will be same as the router?
@@sbcode That is probably because you were earlier connected with the iphone. Once I did it, it also asked me a username+password, before the Tplink Extemder password set up step. I'll look for how to set up one username and password, since the one I am using was my dad's.
I just did a factory reset, just like I showed in the video, and created a completely new password different than all other times. What I show in the video works. And the video is evidence.
probably. I've never tried connecting to free wifi hotspots. I expect it should work though if you can connect to the free wifi using your phone normally without problems.
I made the mistake of accepting the suggested “strong password” (which was fingerprint memorized into my iphone), and when I go to log in now , it says UNKNOWN PASSWORD. I am trying to simply reset my password so that I can proceed, but for the life of me cannot see how this is accomplished. Help??
you factory reset it, you then connect directly to the extender, and configure it to connect to main WiFi router in your house and mimic its SSID and password. You then reboot the extender, and then connect your phone to your house WiFi SSID. If all is correct, you will be connecting via the extender, when the extender signal is stronger than your house WiFi signal.
Im sorry but these TP links are the worst. Every time I try to set it up it kills my wifi connection completely. I followed every step, all smooth, until the very last - asks me to connect with my wifi - at which point it asks me for a password ??? - I see that doesn't happen to you in your video - but to make matters worse it then doesn't accept my wifi password as correct and won't connect. It also won't let me connect to my router wifi again unless I remove the TP link network from my wifi manager. Why won't it ever work - it's driving me MAD. Such a waste of money. Note - just read up. It's a problem with TPlinks and Macbook Pro. How annoying, what a waste of time and money - DO NOT BUY THIS PRODUCT.
I made a video comparing latency between several extenders. ruclips.net/video/TwlHw1Qgk2M/видео.html In my test, the TP link was the worst. The best extender was the netgear ex3700 5GZ band. You will get best results from an ethernet cable, but currently in my house, the gaming pc which isn't using an ethernet cable, is using the ex3700 5gz, and the ping is sometimes around 10. So it can be very good as long as the ex3700 itself has a good connection to the main wifi router.
Did you connect to the TP-Link_Extender SSID first? Then check the connection information, and then use the IP is shows for the Router (or gateway) address.
The tplink forums are full of people saying they cannot connect this piece of poo. It's great the first time you take it out of the box but try and change a wifi setting or take it on holiday and connect it and the whole thing screws up and fails. They dont tell you about all this faff because they know it will put people off. My advice is once it's set up for the first time leave everything alone or you will regret it.
when connecting to the local extender use the http address. There wont be https unless you have installed a certificate on your extender that is validated with a certificate authority. Factory supplied certificates will expire and are effectively useless after a period of time, so it is very unlikely that your extender has a valid ssl certificate from a certified certificate authority. If you disagree with connecting to your extender by using http, then maybe you can return it.
![Kodak Black - Versatile 4 [Official Video]](http://i.ytimg.com/vi/VcP_1Ua__vY/mqdefault.jpg)
It's taken me hours to try and figure out how to get my TP-Link to work since I moved house, and I finally come to your video and fix it in minutes. Thank you so much!
Ever thought about recording sleep aid podcasts.
I agree as a compliment. Utterly soothing
Thanks for putting this video. I was struggling to reset my Extender password, but your video made my life easy now.
Was struggling with the new reset of my wifi booster. Your video is a life saver thank you ever so much God bless😊
Thank u so much sir for the crystal clear video..I was resetting it ..without connecting it in to the socket...and it was somehow taking the old Wifi name and generating new Extensions...Following the steps u showed above...I finally cracked into it....u r such a savior...have a great day !
Incredibly well put video, took me exactly 5 minutes to set up after watching your instructions. Thank you very much!
Love your little kitty in the background 🙂 Thanks for the video.
It was super clear . The additional info is that , after connecting to TP Link extender , your anti virus may block it and hence it may not show the wifi network so better to put off anti virus for short while.
Amazing, very easy to set up. Great cat companion as well.
THANK YOU more helpful than the actual website
Love the cat chilling in the background 👍🏻😅
Many many thanks from India.
Tysm! I didn’t know how to set it up & connect to it; it’s working now 😄 thnx
Beautiful garden 😊 and a beautiful cats 🐈 🐈⬛
the natural password and username is i guess (admin) and (admin) for all tp link extender and also wifi
it worked for me after forgetting the password of extender i reset and set everything to admin
it's working admin username
admin pasword
I love you men 🥰
just want to say thank you soo much that was easy to understand... helped me a ton...
Thank you so much!! I've been having to pay for mobile data constantly earlier instead. The issue is finally resolved now thanks to you!
So I did every step right and have before but setting it up again the extender doesn’t reboot during the last step ?
Thanks, mate. It was really helpful albeit different TP-Link model, it didn't matter though because of same procedures.
Thank youuuuuuu , You are the best 😭❤️❤️❤️❤️
I can see wifi but internet not working on my extender
I have the same problem
Same
Same
I got to that stage and mine wouldn’t connect to the internet browser. Instead, I pressed the ‘padlock’ button on the extender until the ‘RE’ light was flashing and pressed the WPS button on the router I wanted to connect it to. It then configured with the extender and I didn’t need to enter any details on a browser for it to connect.
@@jmsfr1220 your a god
Thanks A lot. It Helped me a lot to reset my Tp-link.
very nise tutoryal bro good bless u
txs man i fixed mine by seeing ur video
I've been breaking my head. Thank you so much for the video
This video was very helpful thank you
Cheers mate! It really helped me.
Hats off to you sir. Thanks a million.
This didn’t work for me. I copied the IP address but then the booster had no wifi. So it couldn’t go to the admin page. This is a booster left behind by a guest. I reset it fine. But that’s as far as I could get.
Such a clear explanation ! You helped me out of hell. THANK UU !
If my router is in 2nd floor and I connect the extender through LAN network cable and place the extender in ground floor, so speed will be same as the router?
Great video and much appreciated. Cheers!
Thanks so much with the help
thanks a lot
Happy to help
Thanks a lot, it worked for me
thank you buddy, it helped me
After factory reset it apparently still asks for old username and password ⁉️
it works for me, evidence is in the video
@@sbcode That is probably because you were earlier connected with the iphone. Once I did it, it also asked me a username+password, before the Tplink Extemder password set up step. I'll look for how to set up one username and password, since the one I am using was my dad's.
I just did a factory reset, just like I showed in the video, and created a completely new password different than all other times. What I show in the video works. And the video is evidence.
Try this textual version of the video. medium.com/@sean_bradley/factory-reset-tp-link-wa850re-n300-wifi-range-extender-d2556fad451b
probably. I've never tried connecting to free wifi hotspots. I expect it should work though if you can connect to the free wifi using your phone normally without problems.
I made the mistake of accepting the suggested “strong password” (which was fingerprint memorized into my iphone), and when I go to log in now , it says UNKNOWN PASSWORD. I am trying to simply reset my password so that I can proceed, but for the life of me cannot see how this is accomplished. Help??
Thanks man 🙏🏾 helped a lot
It's not opening in the browser without internet??
you factory reset it, you then connect directly to the extender, and configure it to connect to main WiFi router in your house and mimic its SSID and password. You then reboot the extender, and then connect your phone to your house WiFi SSID. If all is correct, you will be connecting via the extender, when the extender signal is stronger than your house WiFi signal.
Huuh I. Don't get it@@sbcode
Solved all my issues, cheers mate
Tq very much sir😊🙏🙏
how do you have the extenders wifi if it isn’t connecter to anything?
when it isn't connected to your home wifi, it broadcasts a temporary wifi so that you can connect to it and configure it.
You are awesome 😎
Thank you
Thanks a lot!!
can you tell me please, why my extender doesnt want to restart at the final part?
everything i know is in the video
@@sbcode thank you, i found out... make sure you wrote the correct password :))
ONE CAT AND DOG TWO CAT AND DOG
is it broken when nothing lighted up after 5 seconds?? :(
It was helpful, thank you
When it ask you to create a password should u use the same password as the wifi.
at @1:30 put in anything you like
@@sbcode I put in the original wifi password and it had this ! Besides the wifi and it doesn't work says limited connection.
see the video, i don't have your problem
Does the wifi extender need to be beside the router to work.
No, just in range of the signal. Put it in a place in the house where wifi is already good for your phone atleast.
that was very useful thx bro
thanks
thank you so much
Thanks bro
i have a problem when i copy the ip address and put into safari it won’t work because i’m connected to the tp link please help
I have a new connection how to reconfigure this device with new router
Safari doesn’t let me enter the IP?? Why??
same here
Tysm your really helpful 🙂
How do u change your TP extender's wifi password?????
It’s both admin
Thanks, it helped
Bro when i paste this on the web it is just not getting loaded, i dont know why please tell!!
Thanks bro 👍
When i paste my ip adress in browser it just responds with "err_address_unreachable'
Im sorry but these TP links are the worst. Every time I try to set it up it kills my wifi connection completely. I followed every step, all smooth, until the very last - asks me to connect with my wifi - at which point it asks me for a password ??? - I see that doesn't happen to you in your video - but to make matters worse it then doesn't accept my wifi password as correct and won't connect. It also won't let me connect to my router wifi again unless I remove the TP link network from my wifi manager. Why won't it ever work - it's driving me MAD. Such a waste of money.
Note - just read up. It's a problem with TPlinks and Macbook Pro. How annoying, what a waste of time and money - DO NOT BUY THIS PRODUCT.
I no longer use it. It has a really long sleep wake up, so its like your internet is slow, unless you are using it constantly.
Dont work when i put the ip address in it dont load?
it works for me. I demonstrate it in the video.
Thaaaaaaaaank you very much
Will this work for my PS4? I mostly get around 150 ping. Will it make the ping lower if I use this?
I made a video comparing latency between several extenders. ruclips.net/video/TwlHw1Qgk2M/видео.html
In my test, the TP link was the worst. The best extender was the netgear ex3700 5GZ band. You will get best results from an ethernet cable, but currently in my house, the gaming pc which isn't using an ethernet cable, is using the ex3700 5gz, and the ping is sometimes around 10. So it can be very good as long as the ex3700 itself has a good connection to the main wifi router.
When i put the ip in the browser its says this page is not available
Did you connect to the TP-Link_Extender SSID first? Then check the connection information, and then use the IP is shows for the Router (or gateway) address.
man you are rock..... superb yr
Bro how to change extender password plz rly
Try this textual version of the video. medium.com/@sean_bradley/factory-reset-tp-link-wa850re-n300-wifi-range-extender-d2556fad451b
I can't get it to connect to the IP adress.😥
very helpful video
How much money sir
The tplink forums are full of people saying they cannot connect this piece of poo. It's great the first time you take it out of the box but try and change a wifi setting or take it on holiday and connect it and the whole thing screws up and fails. They dont tell you about all this faff because they know it will put people off. My advice is once it's set up for the first time leave everything alone or you will regret it.
factory resets work for me every single time I ever try.
@@sbcode yes thanks to this video I finally got it to work which is brilliant. Once you know you know!!
i like it
What to do its written cant connect to server ??
go backwards and try again
@@sbcode I tried it but its showing that only i tried many times
I don't know, id have to be there to find out. It works for me.
i don't know password and after reset i can?
In the video, after i've reset it, i then connect to its SSID, visit the url shown in the connection, and I am then prompted to set a new password.
when i do it then it says https the ip cant be reached
when connecting to the local extender use the http address. There wont be https unless you have installed a certificate on your extender that is validated with a certificate authority. Factory supplied certificates will expire and are effectively useless after a period of time, so it is very unlikely that your extender has a valid ssl certificate from a certified certificate authority. If you disagree with connecting to your extender by using http, then maybe you can return it.
Hello,
I've changed my wifi password recently...so I also want to change my extenders password can you help me??!!!
factory reset is what i do. But you can log into the extender and reconfigure which wifi signal you are extending.
@@sbcode thanks 😊
Bro put some energy you Re making me sleepy
hey bro, I fixed my video especially for you bro. I hope you like it bro. Watch it again and let me know what you think bro.
Sure man , thanks for taking my feedback I will subscribe you ♥️
Wa850re
Internet not available
Ich küss dein Herz
Doesn’t work for me
it works for me
@@sbcode I’m plugging it in next to a WiFi router but it always says that it can’t find a wireless device when scanning
try next to a different wifi router
THANK YOU SO MUCH
Very helpful, thank you 🙏
Thank you
Thanks
Thanks bro
My browser doesnt takes me to extender router page when i enter IP address? Please help
You probably aren’t connected to it
Thank you so much
thank you
Thanks a lot
thanks a lot
Thanks♥️