Hurricane System - High Efficiency Cyclones
HTML-код
- Опубликовано: 24 мар 2014
- Optimizing Cyclone's Efficiency
Supported by the PACyc Model, and considering several economical and operation constraints (such as size and pressure loss), with numerical optimization it is possible to generate millions of virtual prototypes within an affordable time period, and to observe the impact of each dimension ratio on the cyclone performance.
Considering this approach as the best path to obtain truly optimized cyclones, sound theories of cyclone collection and pressure loss were chosen for each application, and afterwards improved for predicting collection efficiencies for new geometries. These numerical optimization problems have resulted in many different new lines of cyclones and several patents. 
Наука
Perfect presentation👍🏾
thank you very much for your help ! keep on !
What 3D software is used to create simulation?
This types of designs for Cyclones, tornadoes, hurricanes should siphone, disintegrate the velocity of the pressure from the base all the way up, since warm air and cold air when they are trapped it creates this type of cyclones, warm air that was not able to release its strength on top while cold air pushes it sideways and upwards, the "tornado, hurricane, cyclones" drainage system or vacuum can be installed after the blue print so as to contain, disintegrate the velocity from the base or at the middle depending on the measurements and gauges of temperature from a barometer and the rest of the equipment. The "Vacuum" can prevent those cyclone either on land and on water that it can be used to create energy as well for energy needs, the way pulsators in a washer does, eitherways counter clockwise that typhoons are not designed.
can a cyclone be "blown" from the bottom or will it only work from a vacuum in the top? i'm wondering if it is blown from the bottom, will it create enough venturi to still suck the gas through the top but not affect the blower from the bottom.
Hi Kevin,
If you blow gas from the bottom, the particle reentrainment effect may (almost certainly) become very relevant, thus compromising critically the overall cyclone's gas-solid separation performance.
However, focusing only on the gas behaviour (and neglecting completely the major purpose of applying a gas cyclone is successful gas-solid separation) every cyclone can work on positive or negative relative pressures, but the gas must always go toward the lower pressures zones, thus either blowing from the bottom or suction on the top, the gas will follow the same path, thus having similar gas dynamic behaviour.
Visit our website for more information about our cyclone systems design.
It should be siphoned Kevin from the bottom, remember, when you're preparing juice, the force is at the base and where the stirring action is, when you place the stirring rod, it quickly breaks at the bottom or at the sides where the huge force is.
Great background music
❤️❤️❤️
what 3D software is used to create simulation?
Solidworks Flow Simulation
Hi. Is it possible for a cyclone to separate particles of different density rather than diameter?
Not sure about cyclones, but there are vertical blowers that do this. Have a look at the ones the tea industry uses.
@@markp8295
Thanks. I wish i had known this back then
Cyclone is effective of trapping high density dust because it's operate by gravitational attraction.The power of cyclone is dependent on the blower.
Is it posible the cyclone effectively used to suck 200 mesh coal ash with clean air out.
Dear Erick,
Thank you very much for you contact. To best understand your problem can you please contact us by email ( marketing(at)acsystems.pt ) and we will be happy to help you.
Kind regards,
ACS
👍
EFFET RANQUE