I don't care if he bought the wood and threw the pallet together right before the video. I'm trying to figure out why with all the ways that could have gone it ended up being seating. (Tip: leave the pallet in direct sun for a few days to really dry them out before pulling them apart. Makes it almost unbelievably easier in my experience).
This didn't look like any pallet I've ever used the nails are twisted and twice as long, the pallet wood has more defects, and it looks like it was dropped 10 foot as well as ran over by a clamp truck, fork truck, and tractor trailer then dragged over the gravel parking lot then over grease after an oil change. This looked like it just came out of the planer
I don't kno? It's kinda strange. Weird shape. What's the purpose of the rounded out areas? Why connect all 4? Like I said, I don't kno...? And , U can purchase brand new pallets.
Now repeat this with a real pallet! This pallet couldn’t carry a bucket of my poop let alone an actual, full real, pallet load. Have you tried dismissing a real pallet? Doesn’t look like it here! Please translate before hearting! Look up Dainermade and the many other pallet creators out there Idea is nice though so credit where it’s due
Nice place to get a splinter in your ass, or ram s nail into your foot and get gang green. The flowers look good. If this is a prototype i can understand the weak casters short nails and lack of detail But even pallet wood can make some nice stuff, this isn't it. What is the basic use for this? Seat side table table? Inside or outside. As is it can look good if you covered it with foam cloth and fabric then stapled the materials to it, most couch finiture look almost like that under the fabric. A 900usd couch looks like pallet wood under the fabric but the fasteners have to hold it togather The nails you used are too short. The corners have to be softer gaps should be filled in, staples and nails can't poke out. You could put arms on it and legs but they make chairs like that now.
Why does this pallet look like it's never been used? It came apart suspiciously too easy.
Wondering the same thing
Also is it just me or are the curves made from a solid board of timber which would not be found in a pallet haha
I was looking and thought “damn that’s the easiest pallet to dismantle I’ve ever seen!”
@@brewersbassfishing4919And me
I don't care if he bought the wood and threw the pallet together right before the video. I'm trying to figure out why with all the ways that could have gone it ended up being seating. (Tip: leave the pallet in direct sun for a few days to really dry them out before pulling them apart. Makes it almost unbelievably easier in my experience).
I call bullshit. I literally used everything short of a damn block of C4 and no Pallet comes apart that easily.
Undoubtedly, but, definitely, a unique, unprecedented, unparalleled, unmatched, incredible masterpiece. Thanks always.
We get pallets sometimes like that at work, priceless
Генеябельно!!! 👍
How do they come of so easy this has to be set up
Of course
I so badly wish they were this easy
I hear ya, takes me 20 minutes, and half the boards get splits.😢
Gotta be the ugliest piece of whatever it's supposed to be. Seriously bro, poor design.
i love these videos
Welp what is it? Oh it’s just my sitty book reading nooky squat chair/ rolling karaoke stage. Hell cut a hole out and shit in it. 😂
Nice video❤❤
Very good
Why go to all that trouble just mount 2x pallets on top of each other, add planks, fit wheels and you still have a seat
wow. not only so clean, neatly cut and sanded but also of good quality wood.. amazing.. how and where did you find them?
Built it beforehand then broke it down for the video
si a sido hecho para sentarse me hubiera sido una silla o una banca
Palette Ikea,il se démonte toute seule,,,😂
The only pallets we get here are usually old rotting or have massive braided nails usually 4 or 5 per block.
This didn't look like any pallet I've ever used the nails are twisted and twice as long, the pallet wood has more defects, and it looks like it was dropped 10 foot as well as ran over by a clamp truck, fork truck, and tractor trailer then dragged over the gravel parking lot then over grease after an oil change.
This looked like it just came out of the planer
I don't kno? It's kinda strange. Weird shape. What's the purpose of the rounded out areas? Why connect all 4? Like I said, I don't kno...? And , U can purchase brand new pallets.
Why?
I wish I could breakdown a pallet that easy lol
Испортили столько красивых поддонов. Хотя много полезных вещей можно было сделать. И столько труда, очень жалко...
I'm glad I skipped over most of this. Too much effort, time, and materials for very little return.
is there way to contact you for business purpose ? or can you drop email id in your videos description ?
I wasted 16 minutes on something unknown... What a load of ....
Now repeat this with a real pallet! This pallet couldn’t carry a bucket of my poop let alone an actual, full real, pallet load. Have you tried dismissing a real pallet? Doesn’t look like it here!
Please translate before hearting!
Look up Dainermade and the many other pallet creators out there
Idea is nice though so credit where it’s due
Nice place to get a splinter in your ass, or ram s nail into your foot and get gang green.
The flowers look good.
If this is a prototype i can understand the weak casters short nails and lack of detail
But even pallet wood can make some nice stuff, this isn't it.
What is the basic use for this? Seat side table table? Inside or outside.
As is it can look good if you covered it with foam cloth and fabric then stapled the materials to it, most couch finiture look almost like that under the fabric.
A 900usd couch looks like pallet wood under the fabric but the fasteners have to hold it togather
The nails you used are too short.
The corners have to be softer gaps should be filled in, staples and nails can't poke out. You could put arms on it and legs but they make chairs like that now.
Нахрена так подробно снимать, пол часа только возди выбивал...
was soll dieser Scheiß keine Erklärung nur Hintergrund Geräusche das ist nicht ok
Very disappointing work piece. An expert carpenter can't make such a stupid wood work. Please don't do such nonsense.