Это видео недоступно.
Сожалеем об этом.
Face Recognition Door Lock Using OpenCV on Raspberry Pi
HTML-код
- Опубликовано: 15 авг 2024
- Face recognition door lock system is capable of making decisions based on facial recognition technology. The system uses a webcam and a Raspberry Pi. It is capable of performing facial recognition on its own such as face detection, features extraction, and face recognition using OpenCV libraries.
Watch this video to create your own Face Lock System Using Rasberry Pi.
⌨️Software :
1️⃣ Thonny (Python3)
💻Tutorial:
tutorial.cytro...
🔧Hardware :
1️⃣ Raspberry Pi 4 Model B
[2GB] my.cytron.io/p...
[4GB] my.cytron.io/p...
[8GB] my.cytron.io/p...
2️⃣ 16GB Micro SD Card my.cytron.io/p...
3️⃣ Official RPi 15W (5V/3A) PSU USB C UK Plug my.cytron.io/c...
4️⃣ 12VDC Solenoid Door Lock: my.cytron.io/p...
5️⃣ 3x18650 Battery Holder: my.cytron.io/p...
6️⃣ 3.7V 2000mAh Li-Ion Battery: my.cytron.io/p...
7️⃣ 1CH Active H/L 5V OptoCoupler Relay Module: my.cytron.io/p...
8️⃣ CH-2 Quick Wiring Terminal Press Type: my.cytron.io/p...
9️⃣ Maker pHAT: my.cytron.io/p...
🔟 Jumper Wires
#imageprocessing #OpenCV #RaspberryPi #facelock
🧕👩🎓👨🎓
If you are a student, register here:
www.cytron.io/...
👨🏻🏫👩🏻🏫
If you are a teacher, register here:
www.cytron.io/...
Suad Anwar,
Cytron Technologies.
Thankyou I want to modified this for my thesis maam very informative and well explained!
visually explained very well
Hi , at first i have to say thanks because of this nice tourtial you made 👌👌👌
I have a question about this project , is this project will open the lock after it saw any faces or there is specific faces that it can recognize?
Because i need to make a code that Rasberry pie can recognize my face between other faces , like what our phones are doing with face unlock feather 👌
Can you help me with that?🙏
For anyone wondering the purple Maker pHAT is optional and also if you have problems with your lock not opening check what GPIO itis plugged into is the same in the code
What is the purpose of the maker phat? Thank you!
That's awesome , but i have some questions
1-Can we add a virtual unlock button in the interface or whatever as a second way to unlock ?
2-Can we use 1 or 2 servo motors instead of that lock - i'd use 'em to power manual deadbolt lock-
3-Can we make use of the open Cv liveness detection
hi , im currently doing a project on face recognition smart home system, may i know how i can insert switching on and off of an led after the door is unlock for few second. btw im from malaysia too. how can i purchase the maker phat? i cant find any on shopping platform. And one more question is, how do i connect the solenoid if im not using the battery as my input ?
Nice video! it really worked!
Superb mam...🔥🔥
What algorithm is used in face recognition?
good tutorial, but I have a little problem. Why is the camera response to the raspberry so laggy?
Hi. You may email to support@cytron.io for further technical assistance. Thanks :)
Because camera has delay, if you need less, you can buy one specially for raspberry ;)
Mashallah got beautiful face ❤
Hello, can we use the Rasp Pi Zero 2W on this example?
may I know what network element is implement in this project... if it have and what it is?
can you please send me the link on how the get the data set for face recognition?
please clear the error "face_recognition has no attribute face_location"
what kind of data base used in this project and what kind of frame work used in this project
hi
Is there an option to get a pulse without register my face; i mean i need to auto unlock for any face without registeration
I want to increase fps. Its not usable at present.
Using raspi 3b
Why my relay unlock the door, and when it req me, the relay it closes.
Ple help me
too good swad
Great work! Thanks for sharing!
Can I use ESP32 instead of Raspberry Pi? Please answer
Can we done this project with using raspberry pi 3+?
thanks you information's
soalan, kalau saye ganti webcam tu dengan raspberry pi camera boleh?
Assalamualaikum im gonna question for maker phat for what pls answe
Hi
I am facing problem with syntaxerror which is in "if doorUnlock == True and time.time() - prevTime > 5:" please help me
Hi. You may drop an email to support@ctron.io so we can help assist you further. Thanks :)
@@cytrontech hallo I have the same problem please help me
waalaikumsalam is there a way you can do this with your phone with arduino
can i upgrade this project by adding alexa so that we can control using voice command?
We never tried this before, but you can try to upgrade this project so that we can control it using a voice command.
@@cytrontech can i use raprberyy cam to replace the usb webcam? will the coding be the same?
can you give us a schematic diagram and block diagram?
My webcam is very laggy. Can someone help me fix this
Where to get the code?
Mantap
Nice video keep it up
I can't find the maker pHAT, place what can I use to represent it
Hi, Maker pHAT is an optional. You can do the project without using it. I'm using it because it is easier to connect to the 5V, GND, and GPIO 17 pin(the pin has label) compared to Raspberry Pi.
Dear i need code of that project in Python can u please share code . I shall be very thank full to you.
Can i see the source from opencv
I have problem with syntaxerror which is in "if doorUnlock == True and time.time() - prevTime > 5:" please help me
rewrite the code, it have problem with minus...rewrite it
hi can i connect my face recognition python only with this without using raspbery pi 400 keyboard as tutorial u do?
Hi. You can email to us at support@cytron.io for further technical assistance. Thank you
Allahuma bareek!
where the battery cable will plug?
Hi. You can email to us at support@cytron.io for further technical assistance. Thank you
are you using male to female jumper wires?
I'm using both female-male and male-male jumper wires :)
How did get this code
Hi, can i use raspberry pi 3 model B to do this?
Hi, the performance maybe drop compared to Pi 4. Thanks. 😄
Maam Im not able to find maker pHat is there anything else which can be used
Brother I'm Nikhil and I'm also making the same project. Will you guide me a little bit?
Hi, Maker pHAT is an optional. You can do the project without using it. I'm using it because it is easier to connect to the 5V, GND, and GPIO 17 pin(the pin has label) compared to Raspberry Pi.
can i get document of code
For the jumper wire are we using male to male or what?
Hi. I'm using male-to-male on the quick wiring terminal press type and male-to-female on the maker pHAT. Thanks :)
@@cytrontech may I know what is pHat? I couldn’t search information about this. Is it build by cytrontech?
@@applemangoo2325 Yes, its a product from cytron. You may read details about maker pHAT under the link provided in description.
Can we use electricity not battery?
Hi. The products use in this tutorial is suitable with dc current.
What method is this design called?
Hi. We are using the HOG (Histogram of Oriented Gradients) detection method.
Ma'am can u help me.,?
why my solenoid doorlock didnt work out
Hi. You can email to support@ctron.io so our technical team can help assist you. Thanks :)
Kak, boleh minta codingan nya kak?
Great please send code link
Please refer to this link for code: tutorial.cytron.io/2020/11/26/face-recognition-door-lock-system-using-opencv-on-raspberry-pi/
Ve aleyküm selam
Hi
Hello can i have your email so that I can ask you some question. Its really important.