#Smart
HTML-код
- Опубликовано: 26 авг 2022
- Mobile phone repair
Mobile service easy tricks
Mobile service easy solutions
Mobile repair easy work
Easy tracks phone repair
Smart phone power switch repair
Smart phone repair
Power keys repair
Volume switch replace
Power switch replacement
Easy solutions mobile service
Mobile repair easy solutions
Mobile service tricks
Phone service solution
Easy repair phone Наука
I use this a lot ❤❤
Iren kitne wet ki hai
I like your video❤
Век живи век учись 👍
Mast❤❤
same with me 👍
Supar ji❤
😮
Extraordinary!!!!!!❤❤❤❤❤❤.....Good Job❤❤❤❤❤❤❤❤
Coollllll
Your precision is remarkable🎉👍🏽
Bhai ye bit Kahan liye
Good 👍👍👍👍
i discovered that trick 10 years ago and is not that surprising
nice and their is some small heat plate for this solder too
Yes. I know you have
Thanx alot bro❤
👍
Which chemical is this
Which Solder iron u use for repairing
So clean
at first I thought it was that impossible but yesterday I managed
Which soldering iron ?
luar biasa mas
Wooowww ❤❤❤❤
Hor
Thanks
Bro can I use solder wire instead of ppt paste ?
What is the temperature of the soldering iron?
150
how much temperature?
we can just change the whole flex cable isn't it ?
now i know
❤
smooth 😍
Пипец, вот этим мы занимались ещё в 2005 году, а они только увидели! Коннекторы на шлейфах таким же методом менялись
Behuda tareeka button jal jati hai niche side ki kabhi kabhi working me regi kabhi kabhi nhi
Soldering iron name sir please
From where can I get new one ?
I found my Power Button actually still works. The case switch itself was not hitting the right spot.
Maybe it was on an angle idk....BUT....Accidentally I popped the end of the case rubber switches band.
Put it back. Now it works lol. It hasn't worked in over a year :/
Cheap case - rubber band - switch holder, must have been pushing away from the sweet spot :/
I same
Perfect
Temp?
Chenge 4 pin type switch
Nice
🥰🥰🥰
Good
Hi bro 🤜
Irun kine wat ki hai
افضل طريقة
Ye kiska upar se rhakha hu
Sama dengan cara yang saya lakukan setiap ganti tombol
this type of neat work every technician should do for every customer unfortunately most of indian technicians are street smart learners and ruin every day one or two customers mobile and in hue and cry do nothing just goes away with damaged phone the repair man blames on customer that you brought a bad mobile i tried to repair but failed what can i do and damage they make is horrible beyond repair and in despair the customer sells his mobile to shopowner in pennies their is no law and security in India for just road side repair technicians they dont have any certificate degree just some unknown institute not recognized teaching them mobile repair it is pathetic situation in India ....😢😢😢😢
batan ka kya name hai
Which paste used
www.bakutool.com/Solder_paste_ba-5052.html
Coba flex. Tombol yg original bawaan Hpnya YG ADA LEM hitamnya,, yg di video BUKAN flex .tombol yg original makanya mudah dilepas 😂😂
And how we can fix this yellow part into phone😮
too difficult. it's too thin. soldering with very thin wire is possible but replacing them whole is much easier and still cheap (less than 2 usd)
Konsa paste use Kiya plz batao bhai plzz
Ppd paste. Basically solder balls suspended in flux.
😢
no need the air gun
Dhakkon
When I try to do my button got burned
Wouldn't it cook the switch?
No the melting point of plastic is higher than solder paste
paste name
Fail
Де ти раньше був
What paste is that
www.bakutool.com/BGA-Solder-Paste-BK-6351.html
Ppd past
Пиши температуры друг👍
abe ye bahut basic kaam hai ye mat bataya karo kyu time waste karte hai
I like your video❤