Half the comments on here make u laugh. The guy is simply showing u how easy it is to apply 9H ceramic coating in sections moving the applicator sponge vertical then to horizontal motions. Once applied leave to dry anything from 30 secs upto 5 mins. Then buff with a microfibre cloth. Cheers for the informative video. 👌👌
I got some in today and it says to wet the cloth and use the 9h. Directions are a bit hard to understand but that's what I made out. Is that how you did it or was your cloth dry?
Grey car is easiest to work with. Try on black and you'll be terrified of results in the sun :D Never do this in sections like in this video. section should be complete panel. Otherwise you'll see marks of overlaps after completion.
Do you use dry or wet towel to remove residual coating? How long it takes for coating to be properly dry when I can drive car without damaging coating with example dust
@@autovageris It's hit and miss. I don't think it's made by a single producer, but many produce it in the same packaging. You don't have any guarantee that it will perform well. I was lucky and got a good one. Others have reported poor performance. Make of it what you want. It's nice to tinker with it but I would stay with a reputable brand for anything else.
Toni Pieleanu da, intr-adevar, ai dreptate. Dar cand esti ca mine ca nu ai rabdare nici pana a doua zi, cand comanzi din tara, aliexpressul nu este o obtiune. Am luat de pe ceva site din romania 3 sticlute, acum asteptam clientul potrivit pe care sa facem teste. Bafta si spor iti doresc, multumesc pentru raspunsuri!
I used this on my car 6 months ago. I did use a damp microfibre towel to wipe down followed by a dry one. The car is a mid grey metallic and there is no milky colouring and is still repelling water very well and bugs easy to remove. Never used any other ceramic coating but for the price very impressed.
Now I get it... Yes, application and removal of residues, that was the point. Not actually removal of the coating. Is part of a longer coating comparison test, so no point in removing it :)
The instructions that came with are written by an ESOL student "English as a Second Language" hard to understand. Not clear, and this video does not help either.
It's not meant as an instructional video, just reference and documentation. Application is very simple anyway: just apply in cross-hatch pattern, leave for a couple of minutes and wipe off.
Half the comments on here make u laugh. The guy is simply showing u how easy it is to apply 9H ceramic coating in sections moving the applicator sponge vertical then to horizontal motions. Once applied leave to dry anything from 30 secs upto 5 mins. Then buff with a microfibre cloth. Cheers for the informative video. 👌👌
I got some in today and it says to wet the cloth and use the 9h. Directions are a bit hard to understand but that's what I made out. Is that how you did it or was your cloth dry?
IMO Boxing talk no, i used only dry clothes
How many times in between coats do u apply?once a month or ones a week
Grey car is easiest to work with. Try on black and you'll be terrified of results in the sun :D Never do this in sections like in this video. section should be complete panel. Otherwise you'll see marks of overlaps after completion.
Do you use dry or wet towel to remove residual coating? How long it takes for coating to be properly dry when I can drive car without damaging coating with example dust
Dry towel. You can drive straight away, but make sure you're not getting it wet for the first 24-48h.
Czy ten produkt naprawdę działa?
how long wait after coating for buffing?
1-2 mins, just watch the video and you will see me buffing it.
@@tonipieleanu so what can you say about this cheap ceramic? your opinion worth money or no
@@autovageris It's hit and miss. I don't think it's made by a single producer, but many produce it in the same packaging. You don't have any guarantee that it will perform well. I was lucky and got a good one. Others have reported poor performance. Make of it what you want. It's nice to tinker with it but I would stay with a reputable brand for anything else.
When buffing, do you need the damp microfiber clothes? I do not seem to get it work. Coat it, wait for 5min, use damp clothes to wipe it off
Ce parere ai despre ceramica asta, avand in vedere ca este doar 99 ron? Si cat timp o lasi dupa aplicare, inainte sa o stergi?
Daniel Bogdan Bonta încă testez. Am lasat-o si 1min si 20. Se șterge mai ușor dacă lași 1minut. O găsești si la 50 lei sau chiar mai puțin ;)
Toni Pieleanu in ţară? Imi poti da un link?
Nu, de la mama lui din China :)
Toni Pieleanu da, intr-adevar, ai dreptate. Dar cand esti ca mine ca nu ai rabdare nici pana a doua zi, cand comanzi din tara, aliexpressul nu este o obtiune. Am luat de pe ceva site din romania 3 sticlute, acum asteptam clientul potrivit pe care sa facem teste. Bafta si spor iti doresc, multumesc pentru raspunsuri!
I did this today but it’s left smears all over the how do I remove the smears
just polish it with some compound should be easier than you think dont panic
You may need to have it wet sanded out
@@superbogs dont be ridiculous. It is so thin that applying shampoo with a sponge harshly would get rid of smears
You polish before applying the coating?
Geva Soraski yes, with Menzerna 3500. Then prepped with Sonax Paint prepare and Carpro Eraser.
Thanks!
I've tried to apply the coating and give it 3 minutes to dry in night, but it is still so sticky to wipe with the microfiber
Do you think it’s good product compared to other ceramic coat?
M N it's very hydrophobic so far. Check out the other video. Let's see how it compares along the way
It is garbage. It won't last and one professional UK detailer tested it and it turned a milky color over time. Don't waste you money
I used this on my car 6 months ago. I did use a damp microfibre towel to wipe down followed by a dry one. The car is a mid grey metallic and there is no milky colouring and is still repelling water very well and bugs easy to remove. Never used any other ceramic coating but for the price very impressed.
where is the removal part on the video????
Just dump car to the junk yard.
i dont understand. Does this product work or not?
How long should I wait to remove the product?
Eduardo Meneses 1-2 minutes in warm climate
Actually this stuff is fine. I've used it twice with good results.
Crap!!!! It's a nightmares to wipe following instructions to the letter.
I used a damp microfiber to buff it off after 5 minutes and had no issues or streaking.
Why the mask?
I applied multiple coatings on the hood to compare them side by side.
Toni Pieleanu no, I mean the breathing mask
rwl6935 ah ok, I was trying to avoid the fumes due to applying in indoor space.
this is almost like a 'Two Ronnies' sketch, brilliant!!
Mitch Smith 😂😂
You didn't show how to remove the coating mate
What the whole video, mate. From 3:30 I start removing it.
Toni Pieleanu No I mean you didn't show how to remove the ceramic from the car. The whole video is about the application process only.
Now I get it... Yes, application and removal of residues, that was the point. Not actually removal of the coating. Is part of a longer coating comparison test, so no point in removing it :)
Blimey, and here we almost have another 'Two Ronnies' sketch.... Toni needs a job in comedy!! :-D
The instructions that came with are written by an ESOL student "English as a Second Language" hard to understand. Not clear, and this video does not help either.
It's not meant as an instructional video, just reference and documentation. Application is very simple anyway: just apply in cross-hatch pattern, leave for a couple of minutes and wipe off.
This coating are ok for the glass? Thank you
I couldn't tell you, I have not tried it on glass.
Toni Pieleanu works great on my windshield.
Luke Smith got any video to show?
Is it safe for fresh paint?
Probably not, I would leave it gas-out for 30-60 days before applying any ceramic coating.
Toni Pieleanu ok, thank you.
Now that answer my problem. I tried to apply it on a new paint
A gas mask?? Seriously dude??
Better be safe than sorry
Serio w masce ? :D :D
I wanna see it on the scratches
You are not supposed to put it over scratches. Ceramic coatings won't help your scratched car. This stuff is junk also
@@superbogs damn , I got screw . That's how it show it on the video . Damn , that sucks .
So....?
Oh great another silent movie....bad
oh ! what a bad show. stop wasting our time
dislike. nothing special