Edikio Flex | Regular cleaning of the card printer

Follow the procedure below to proceed with cleaning:
Material needed to clean your Edikio Flex card printer: “T” shaped card.
1. Open the printer cover
2. Remove the ribbon
3. Using the gauge, adjust the card thickness to the max position (30mil)
4.Close the cover and make sure it has clicked shut
5.Remove any cards in the feeder if necessary
6. Double-click the control button on the control panel before inserting the cleaning card
7. Remove the film from the adhesive card and insert the cleaning card into the card feeder, adhesive side up. Cleaning starts.
8. The used cleaning card will be automatically ejected into the output hopper
Repeatedly running the “T” shaped card through the printer cleans the cleaning roller in order to maintain print quality and extend the service life of the print head.
To do this, we provide accessories and cleaning kits from the Evolis High Trust® brand, which are available from your Edikio reseller. If you don't have one, you can contact us.
Find the consumables adapted to your product: myplace.evolis...
Contact us to find the nearest Evolis dealer: myplace.evolis...
Recommended cleaning cycle: whenever the ribbon is changed
Edikio Flex printer cleaning is required after 1000 cards printed.
If you continue to run the printer despite the warning and if the warning light remains lit, the print head warranty will be automatically voided because of failure to comply with contractual maintenance obligations.