A huge thank you to all the folks who had suggestions, you guys really helped me get this engine fixed up. Update: I'm making progress on the Nissan project, and will definitely have a video on that ASAP, but it is taking some time getting it fixed, programming the computer for the new transmission, identifying the right student, then I need to do and film the giveaway and edit it all into a video. Actually, I've found MANY students that are well deserving of a car, but at this point I will only be able to do 2 cars. I definitely hope to do more in the future. Hopefully the giveaway videos will get millions of views and that will allow me to keep funding more giveaways. Cheers everybody, and have an awesome weekend!
@@CaptainBaja Not a spark, just light bouncing off a notch in the back of the cam sprocket messing with the camera. Right between the oil cap & intake hat. No worries boss
I watch on my computer while eating lunch, so that probably made it a bit easier for me to to see the sparking. Glad it might have helped out. Thank YOU so much for all the great content. Appreciate the discretion in not sharing names, but it's fine by me. I have a channel on functional 3d prints if you're interested in checking it out: FunctionalPrintFriday
Having watched all your repair videos the person who can tackle disassembling, inspecting, lubricating and putting that boom back together is going to be you.
Yes! Do the chains! Not necessarily because you need to but because I just love watching you fix things and explain everything! You are just wonderful!
It's not the struggle as much as the way you apply the process of elimination to resolve the problem. You are a smart and practical man and you have a great common sense approach to accomplishing the mission. That's why I watch your vids.
If you ever want to add a remote choke, I've used cheap remote door lock units. Same for fuel pump priming. Just set a lever on the choke with stops, then stick the door lock actuator on it. And just stick a fob up in the basket.
Forklift engineer for over 30 years, we refer to these as "whack a mole" jobs. Fix one thing and another pops up. 10/10 for persevering and getting the job done.
Since the chains aren't used like on a bicycle or something with it under constant load and rotation, I would be inclined to leave that project alone. Thrilled to see you got the starting/running issue resolved.
I am 99.9% sure the chains would just need a quick inspection and grease but that main cylinder must be due a rebuild considering the state the rest of the machine came in.
You have a knack for making your struggles fixing things into very interesting and entertaining viewing. I really appreciate your demeanor and humor. I don't want to see you struggle but when you do you still make it look like something very interesting to watch. Good luck with your decision and if you do do this I will be right there watching. Actually I would like to be right there helping.
Very enjoyable content as usual, if you decide to tackle the boom chains please please please get someone to help you with it. That is too big of a job for one person and the risk of injury would be high, love the videos all the best from the UK.
I don't enjoy watching other's struggles and tribulations, but I certainly enjoy when you're successful and I'm always praying your efforts don't need to be great!
You are definitely going to regret the idea of checking the chains while doing the job but afterward you are going to be happy that you did 😂😂Awesome that you got the engine going right again ! Keep up the good work always excited for when you post!!
BRO!!!! I’ve been a mechanic for almost 30 years, worked on almost everything with an engine it at one time or another! I am now an A&P Aircraft technician, and the “mini tape roll” of electrical tape, I have never seen before, and think is freaking ingenious!!! I want you know I saw it here first, and will be using this absolutely and unbelievably simple and ingenious tip/trick on multi million dollar passenger jets in the future (where required and legal, have put that disclaimer in here!) and everything else I work on including things around the house and my race car! I’m very shocked that I haven’t seen this before and impressed with it!!!
On automotive automatic choke carbs, it also has a choke pulloff mechanism, which this seems to lack… on cold start, the choke (if set) is completely closed, but as you start cranking and it fires the first time, manifold vacuum is created, which triggers the choke to be partially “pulled off” (barely cracked open) by the choke pulloff. And then it slowly opens the rest of the way as the bimetallic spring warms up. Imo that is a good starting point on how to handle the choke: keep it fully closed until the first cough, then crack it open. But you’ll start to get a better idea what the engine wants as you use the thing.
Struggling or not your videos are appreciated. Of course, I will watch if you take on the boom disassembly job, but that is a heck of a job. You're really do a terrific job of explaining things in a way that is easy to understand. Thank you for all your hard work making videos and sharing them with all of us.
Since you are always going to run the engine without choke, and only choke it for a few seconds when starting cold, I'd add a return spring for the choke lever on the carb. side to make sure it won't accidentally go into choke while you are on the lift-basket.
I know you’re worried about starting w/o choke when you’re in the lift. An easy solution would be to use RC solenoids. You’d have to work out supplying electrical for the solenoid, but compared to other stuff I’ve seen you do, it would be right up your alley. Solenoids that control the throttles of RC cars and planes would work. It’s exactly the motion of the new manual choke you put on. Hope that helps. ;-)
Your future efforts make my welding shed fab project this morning very laughable. This stuff gets me up and going every morning I’m at the cabin. Thanks man, freezerburn
Glad you got it figured out. The true troubleshooting videos on RUclips are the best. SMA, Ivan @ PHAD have a bunch of them. Love to see people work thru a problem and actually diagnose them. Not just throw parts at them. Thanks for bringing us along even if you were struggling.
@@CWhitmer22015 I watched 4 WatchWesWork videos now... how is he on another level? He even starts the parts-cannon right away, instead of doing the diagnose first. I would agree with South Main Auto Repair (Eric O.), but WWW seems pretty much on the same level like FarmCraft in terms of how he approaches such an issue. Did I just get unlucky with my videos?
Great video! As for the chain, unless there is something about it that feels concerning when operating it, I would leave it alone. If you feel like it moves gritty, too much resistance, inconsistent, or anything along those lines, yes, a proper inspection and maintenance is worthwhile. If its performance doesn't show any sign of concern, it's probably not worth the effort.
You know that in RUclips land, content is king. The chain is a major project that has not been in a RUclips video as of yet. His problem finding skills will make a video interesting to watch.
Don’t take a chance of it not starting if you’re all the way up in the air you don’t want a semi down the boom spend about $35 get a servo and a small remote for about $35 hook it up and be like a Keyless entry to your car Bluetooth hang it in the basket don’t lose it. Click the choke on click the choke off. That’s what I do on mine. It’s beautiful in the winter time. Put the keyless entry button in a Ziploc bag so it doesn’t get wet.
I would be in the "if it ain't broke, don't fix it" camp. But that's just me; on something that large! However, I'd love to see the project cause I know you can do it!
I'm not a mechanic by no means. But I work on my equipment. Sometimes I get into things that I'm not familiar with and need a little help. When I get into something that I don't know much about people like you help me get it fixed. And sometimes your viewers help also. You have a great channel and great people-watching. Keep putting out the videos I enjoy watching them. God bless you and your family and your viewer's brother.
I have had plenty of equipment and vehicles that just took a ton of work to get in tip top shape. Thank you for sharing your process. We have all been there and it makes us feel better seeing someone stick with a difficult repair.
Hey John! I really enjoy your RUclips channel, it is the best, most diverse, entertaining channel I come across so far. I'm an old 80 year old disabled Vietnam infantry veteran who just watches You Tube for enjoyment instead of actually doing any work. Keep the videos coming so I'll have something to do. Thank you from chilly SE Florida...
You may not know what you are doing when you start into a project but in the end you show and teach very well. Thats why I enjoy your videos. And you make it funny once in a while. 😊 Not running down rabbit trails too much is nice.
It’s not the struggle alone that most people watch you for. It’s the ability to not give up and overcome that struggle that people watch you for. It’s rare to see people like that anymore and the ones that have that trait in us but not the means or ability to do what you do watch it for the slightest bit of that feeling you get when you finish a job most would just give up on and buy something new instead.
One experience I had from my old days working on engines is that when something is hard to start check your fuel pump pressure assuming you have a mechanical fuel pump. If there is a slight opening in the diaphragm the fuel runs back to the gas tank. The vehicle will run but it's hard starting because it doesn't have the fuel available right away to the carburetor. So if you have a mechanical fuel pump check the pressure.
Thank you for another great video. Love your fur-babies. I asked Father and prayed if he might help momma cow with her hip pain❤️🙏😞 He always heals me if my wife prays and he always heals her if I pray. Hopefully he’ll heal momma cow❤️
I'm a retired US Navy F/A-18 combat pilot who can drop a bomb through your chimney from over 10,000 feet and now an airline pilot who can land so smoothly some passengers don't even know we've touched down and so I watch FarmCraft to remind myself just what a dumbass I truly am. REALLY enjoy your channel, always a thumbs up.
@@FarmCraft101 Oh yes! If my life depended on being able to do what you do, from making canons to rebuilding engines, they may as well take me out back and shoot me. Keep doing what you do and your channel will have over a million subscribers I'm sure. One of the best, johnson jokes notwithstanding.
ed here, bought oldtrex 40 footer when retired to trim my trees with. had lots [fun] working on it. it was diesel with a remote wire/box and boom control. the izuzu diesel ran perfect wit new glowplugs to start. once i was up high/ lost control, manage to get down even when all oil blew out main up/down cyclinder. lost barrel oil down boom-fun was getting the 20/40 extension cyclinder out to rebuild! after trimming/ downing several trees decided lift was too complicated-dangerous-old, sold it for twice what i gave $2500. it had too many old hoses to worry about blowing out! requires ace mechanic to work/ make safe-not me.
The saga of this lift has been one of my favourite stories of the last year. I'm from a UK farming family (sold up now, blame Brexit) and spent some time as a kid (back in the 1980s) in the workshop making mechanical problems worse whilst our fitter rolled his eyes, swore extravagantly and eventually grudgingly nudged me in the correct direction (most often laughing at how a brainiac like me could be so stupid). Thanks for bringing us your problems and solutions. Now live in Whistler, BC - not much farming around here.
Since you're already in the swing of fixing things you might aswell do the chains and whatever else may need attention, rather than wait for the inevitable failure at the most inconvenient time/place possible. Thanks for taking the time to bring us along and explain things along the way, keep it up.
I love all of your work. You are an excellent mechanic and very inspiring. I really hope you don't do the boom. I was a Crane operator for 35 years. I've seen many pieces of equipment repaired and I've also seen these mobile booms repaired. That is a very big job that requires some specialty equipment in my opinion. Great work great videos.
Hi John. Some suggestions from Germany to you . I have repaired machines like this in the 90s .But when you take it all apart you will find chains that are a little bit rusty but they dont fail .I would install some grease nipples in the boom so that you can lubricate the chains .I would replace some gliding pads of the boom if they are too thin .You can reach the pads without dismanteling all .For dismanteling all of the boom you need to have a big shop floor with a crane of 5 Ton capacity under the ceiling .You have good tools(excavator and you tractor) but these are not heavy enough to handle the boom .Only if the cylinder inside the boom starts to leak strong ,than you have to react .Give this nice machine a little bit of service(i think it was missing it for a long time) and it last for some years and will help you good on your projects .The only thing that is dangerous on this kind of machines is driving fast over bumps .It can easily shoot you out of the basket .
So cool to meet the girls. They look pretty happy. You are obviously the kind of humane person who knows how to treat and love the animals who give their all for you. Also, as a person who has spent most of his life as an amateur mechanic messing with old cars (the kind with carburetors) I have concluded that carburetors are the ultimate mechanical curse (even worse than the Chevrolet Vega). We of mechanical inclination should say a daily prayer of thanks to the deity of machines for mass production of fuel injection. BTW, your trouble shooting skills are top notch. Well done.
I think the biggest thing that might have made a difference in your diagnosis of the hard starting would have been to see the original carb setup. My experience with electronic chokes is that they are simple and reliable if adjusted correctly and functioning correctly. Usually, the choke valve would have slight spring pressure on it when closed (cold). Once the engine starts making vacuume, a servo would pull it open a little bit to allow it to start and run. As the coil warms up, the choke would open more and more until there was no choke action at all. Someone screwed you at some point by deleting someting or modifying something that really needed to be there and working. If you could find another lift of the same model, look to see what's there and figure out what yours is missing. Just my 2 cents. 😀
I had a 93 Nissan Sentra that started giving me all sorts of engine running problems. I finally figured out that you could pull the codes using the dash lights and when I did that it showed the Engine Temperature Coolant Sensor was bad and the wires had corroded. After I replaced it and repaired the corroded wires and connector it ran great. Rainman Ray Click!
Finally a video i can assist on. Firs thing, the choke isn't necessary if you have some way to feather the throttle. My first car was a 1985 Corolla with a 1.6l carbureted engine. I removed all the emissions stuff and drove it through Chicago winters with no choke. On the very cold days i had to lightly feather the gas to get the accelerator pump to push extra fuel in. It's a crutch to fix the air fuel ratio since you can't remove air using a choke anymore. I guess you could probably figure out a Bluetooth small scale electronics way to use a solenoid of some sort on your manual choke cable and have a controller on the boom. As for the boom lift main cylinder and chains, i operate a crown turret truck for a living. Look up a crown tsp you'll see them. Our main mast is just like your boom lift, cylinder and chains to lift into the air. The chains and cylinder are pretty much non serviceable because by the time you need service the machine is hardly worth anything. We have 1 machine that has bad roller bearings and the cost of repair is more than what the machine is worth, not to mention the needed crane to tip the mast on its side. In your case i would place the boom parallel to the ground and if you have a nice flat driveway of some sort you can probably make a rolling cage that can hold the boom as you slide them apart. If you do go through with this job make sure you also replace the rollers. New chains are nice, new rollers make it feel pretty good though.
My dad was a chevy man. His thoughts for sure, BOAT ANCHOR, put a chevy engine in it so you can go to work. Maybe? Great work trying to keep a ford running.
in regards to the boom lift repair you talked about I would like to remember what they told us in music appreciation class: "if it's not Baroque, don't fix it".
Please thumb up so John can see this idea for a remote choke. In order to get platform choke control, you may be able to buy a cheap RC 9 gram servo and control it with an RC servo tester on the platform, its just a single potentiometer and very cheap. I have no idea how the control signals will work over that long of a distance, as these things only work on 5 volts. If the voltage drop is too much across that long of a distance you may be able to use some kind of level converter closer to the carb to make it work properly, or maybe just run the pot to the boom, and leave the servo tester on the platform, it may work because they work off the changing resistance values and you just may get enough swing even with the added resistance of the extra long wires, or just run thicker wire to limit the resistance drop. Another idea is to also just use a 12v solenoid to push the plunger in and out, but that would limit the choke to only 2 settings, say half choke and no choke. it defiantly would be nice to have confidence in being able to start the motor from the platform no matter how long you are up there, in any conditions. Good Luck.
As usual, your video is rife with opportunity to crack wise and be otherwise crass, tacky and/or crude... but I'm going to pass this time. Instead, I'll simply say, "Job well done!" Whittling away at one problem after the next and not stopping until you have results or at least answers. John, I suspect it's your TENACITY that inspires me as much as your total combined skill set. And like all of the good farmers that I've known in the last 59 years, you are most certainly a jack of all trades and a master of none, but still better always than a master of one! And because of your videos, there are at least 361k people out there with a much higher respect for the craft of farming! KUDOS!
Hi John, you may want to change that timing belt. If they are a few years old they will break and then you have big trouble. Also the manufacturer says the chains in the boom need to be inspected every 2 years for rust, wear, or out of adjustment. One other thing on those is to make sure the chain sheaves are still able to take grease and are not worn down. I have worked on these for years.
Taking the boom apart would be a huge job. Anything is possible with time and patience. If the boom is fully extended are there any inspection covers at all?
Wow what a job this lift is! You know what they say, "If it ain't broke don't fix it." That being said, it will make a fantastic video as well as give you complete piece of mind...especially when you are 80 feet in the air. Great video John thumbs up.
It might be a editing artifact, but it seems to me that the limpy cow's leg seems to kinda "snap" right at the ankle when she is puting all the weight in it, right at about 17:24, might be worth for you to take a closer look at it
Woah...that does look like the ankle is favoured...and when weight is applied...pops straight. (Makes me shiver a bit...as I have a similar ankle! :) )
Hi there, I really enjoy your channel and all the videos you put out. I am diy fanatic myself but not into all the heavy gear you work on. But it is always enyouble to see skilled people like yourself troubleshooting different problems. Gives me both a good time by the computer and input on how to solve my own problems. Keep up the good work and I wish you a great weekend all the way from Sweden.
As I understand it the chains are only under tension while the boom is telescoping. You finally got that beast running good. I'd get some solid use out of it before I'd start taking it apart again.
Living in Minnesota, I've found that having a heated battery wrap and a trickle charger is much more effective and efficient for a gasoline engine in cold weather than a block heater, if you ever decide to winterize your lift.
Having seen the multitude of damaged, scored and rusty hydraulic rams which Kurtis on Cutting Edge Engineering (Australia) is presented with, it is imperative you inspect the ram, cylinder, hoses and chains. Wouldn't matter so much if it was a ground based machine - you'd run it 'til it failed; but this is a real safety issue - you're 60 feet up in the air and even with 'fail safe' you're not going to 'feel' safe. It's a life thing so go to it - and I'm sure going to enjoy the ride! All the best, Bill B (UK).
John, Have you considered the possibility of building a linear building(s) starting at your whole house burner. Maybe having a concrete pad surrounded with a sidewalk having: wood burner..split wood storage..splitter...log storage area....raised concrete area for the sawmill (so that the sawdust can be swept off the work area and onto a spot where the sawdust can easily be cleaned-up)....sawmill blade sharpener/tools storage/work area (with railroad rails imbedded into the concrete - The idea is to cut lumber and then stack it directly onto a railroad flat cart that can be rolled into the kiln.) leading to...lumber kiln.....leading to wood storage for kiln dried lumber.
Thanks Farm craft for another amazing video. Yes, please inspect the chain and other parts in the boom. Of course it's not an easy job, but It's better to be safe than sorry
The process lead you through some needed repairs. Now you have a great running engine. Manual choke for the win. Well done! Maybe test it a few times from the platform at ground level before you go up.
Thanks for all your work and as a non farmer i do love the cow breaks, used to visit my uncle Marts farm in pa and shifted hay and helped calve, as a kid it wasnt work it was fun stinky fun
I’ve done a few chain jobs in my time. Most of them were on F & G series JLGs.The H series boomlift chains seem to last a lot longer. If I were going to do a chain job now, I would do an abbreviated chain job. What that means is to check the first 2 feet of chain and see if there’s any elongation in those first few links that go completely over the sprockets. Those links get used way more than any of the others. Id also check for play in the sprockets no matter what. That being said, I think you should do a complete chain job since you mentioned in previous videos that you might have to do a cylinder repack as well. And along the lines of repacking, the telescope cylinder. The problem you described might be the holding valve or counterbalance valve. There is a way to troubleshoot that. Raise the boom up all the way. The telescope out about a foot. Disconnect the return line. If you get a steady drip out of return fitting on the counterbalance valve, then the counterbalance valve is the problem. Again the manuals referred to the counter balance valve as a holding valve. you might have a bad counterbalance valve and a bad piston seal in the telescope cylinder. But the ideal thing to do is to correct the counterbalance valve problem first.
Great videos, I’m always impressed by how you approach a problem. The cylinder and chain system in there is much like a forklift boom. The rod end of the cylinder is connected to the top end of the first stage along with a set of rollers,. One end of the chains are fixed to the back of the main boom, around the rollers and the other end to the back of the jib. The cylinder pushes the first stage which then pulls on the chains which pulls out the jib.
Hiya John , I've always been impressed with your diagnostic , engineering and mechanical skills . I also much appreciate the little devil on your shoulder that tells you to "f**k the consequences , lets tear it apart". So..... I'm looking forward to your upcoming boom video. We all know it is going to happen 👍 Seasons greetings from Merry England.
I am getting to know your farm pretty well. I saw the scar from the monster tree. I saw your fields and the pond. I saw your porch and fireplace. It's getting to be like "Disneyland for Adventure". [I know you got the money to repair the Nissan. I am glad we could be part of that.] Carry on good sir!
Your fight with that carburetor reminded me of a single barrel carb on a '71 pinto that was just unfixable. It had a vacuum choke pull off and a bimetallic strip heated by engine coolant. I finally shoved a plastic fuze puller down the card throat to keep it open. Seems like you had to adjust the choke plate with a Ford special tool (or a drill bit) to allow some air through even when fully choked. Car finally went to the scrapyard before I got the carb sorted out.
A huge thank you to all the folks who had suggestions, you guys really helped me get this engine fixed up. Update: I'm making progress on the Nissan project, and will definitely have a video on that ASAP, but it is taking some time getting it fixed, programming the computer for the new transmission, identifying the right student, then I need to do and film the giveaway and edit it all into a video. Actually, I've found MANY students that are well deserving of a car, but at this point I will only be able to do 2 cars. I definitely hope to do more in the future. Hopefully the giveaway videos will get millions of views and that will allow me to keep funding more giveaways. Cheers everybody, and have an awesome weekend!
Please review video at 11:38 for arcing inboard forward side of valve cover.
@@CaptainBaja Not a spark, just light bouncing off a notch in the back of the cam sprocket messing with the camera. Right between the oil cap & intake hat. No worries boss
Should you service the boom? Yes. Will you regret it? Also Yes. Will you ultimately be happy you did? Thrice over, yes.
I watch on my computer while eating lunch, so that probably made it a bit easier for me to to see the sparking. Glad it might have helped out. Thank YOU so much for all the great content. Appreciate the discretion in not sharing names, but it's fine by me. I have a channel on functional 3d prints if you're interested in checking it out: FunctionalPrintFriday
@@netmagithis one
Having watched all your repair videos the person who can tackle disassembling, inspecting, lubricating and putting that boom back together is going to be you.
And Mr Johnson
Yes! Do the chains! Not necessarily because you need to but because I just love watching you fix things and explain everything! You are just wonderful!
It's not the struggle as much as the way you apply the process of elimination to resolve the problem. You are a smart and practical man and you have a great common sense approach to accomplishing the mission. That's why I watch your vids.
If you ever want to add a remote choke, I've used cheap remote door lock units. Same for fuel pump priming. Just set a lever on the choke with stops, then stick the door lock actuator on it. And just stick a fob up in the basket.
Brilliant idea!
You have joined Mustie1 as my favorite content providers when it comes to motorized/hydraulic repairs!
That mini-roll electric tape trick was genius. Gotta steel that one...
This is the most literal expression of "The grass is always greener on the other side of the fence" I have ever seen .... Good Luck Big Mama!
Forklift engineer for over 30 years, we refer to these as "whack a mole" jobs. Fix one thing and another pops up. 10/10 for persevering and getting the job done.
22:38 That face 😂 I appreciate these videos. I'm a country boy stuck in the suburbs and watching these is like a visit back home
Since the chains aren't used like on a bicycle or something with it under constant load and rotation, I would be inclined to leave that project alone. Thrilled to see you got the starting/running issue resolved.
I agree, chains will be a-ok. But I hope he pulls it apart anyway cuz I wanna watch the vid.
I am 99.9% sure the chains would just need a quick inspection and grease but that main cylinder must be due a rebuild considering the state the rest of the machine came in.
@@Adam_Lynn Copy that, that main cylinder is original (maybe) then it is overdue for a seal kit
You have a knack for making your struggles fixing things into very interesting and entertaining viewing. I really appreciate your demeanor and humor. I don't want to see you struggle but when you do you still make it look like something very interesting to watch. Good luck with your decision and if you do do this I will be right there watching. Actually I would like to be right there helping.
Personally, I think you'd be nuts to pull that boom apart. But, I sure would enjoy watching you struggle to do it!
Very enjoyable content as usual, if you decide to tackle the boom chains please please please get someone to help you with it. That is too big of a job for one person and the risk of injury would be high, love the videos all the best from the UK.
I don't enjoy watching other's struggles and tribulations, but I certainly enjoy when you're successful and I'm always praying your efforts don't need to be great!
I watch your videos ever week. Always learn something. Thanks for including the short vignettes about the cows.
You are the first person I have ever seen covering the control panel on the boom. Good job, those panels take a tremendous amount of wear.
You are definitely going to regret the idea of checking the chains while doing the job but afterward you are going to be happy that you did 😂😂Awesome that you got the engine going right again ! Keep up the good work always excited for when you post!!
BRO!!!!
I’ve been a mechanic for almost 30 years, worked on almost everything with an engine it at one time or another!
I am now an A&P Aircraft technician, and the “mini tape roll” of electrical tape, I have never seen before, and think is freaking ingenious!!!
I want you know I saw it here first, and will be using this absolutely and unbelievably simple and ingenious tip/trick on multi million dollar passenger jets in the future (where required and legal, have put that disclaimer in here!) and everything else I work on including things around the house and my race car!
I’m very shocked that I haven’t seen this before and impressed with it!!!
Your videos make me feel better that I'm not the only one struggling with vehicles and machines!!
On automotive automatic choke carbs, it also has a choke pulloff mechanism, which this seems to lack… on cold start, the choke (if set) is completely closed, but as you start cranking and it fires the first time, manifold vacuum is created, which triggers the choke to be partially “pulled off” (barely cracked open) by the choke pulloff. And then it slowly opens the rest of the way as the bimetallic spring warms up. Imo that is a good starting point on how to handle the choke: keep it fully closed until the first cough, then crack it open. But you’ll start to get a better idea what the engine wants as you use the thing.
This is your answer. This is what I recommended in your previous video as well. This is spot on.
Struggling or not your videos are appreciated. Of course, I will watch if you take on the boom disassembly job, but that is a heck of a job. You're really do a terrific job of explaining things in a way that is easy to understand. Thank you for all your hard work making videos and sharing them with all of us.
That "mini roll of tape" is a Great idea.....never would've thought of that one. 😆 Great video as always 👍
The fact this thing ran as well as it did before you replaced all the half-bad\bad components is actually really impressive.
If anyone can sort that boom out it’s definitely you . I for one would love to see you tackle it , love your videos 💪👍👍👍
What I like is the perseverance through the struggle. My favorite person on RUclips by far.
I am convinced that some of the older methods are hard to beat. Good job young man.
Since you are always going to run the engine without choke, and only choke it for a few seconds when starting cold, I'd add a return spring for the choke lever on the carb. side to make sure it won't accidentally go into choke while you are on the lift-basket.
I know you’re worried about starting w/o choke when you’re in the lift. An easy solution would be to use RC solenoids. You’d have to work out supplying electrical for the solenoid, but compared to other stuff I’ve seen you do, it would be right up your alley. Solenoids that control the throttles of RC cars and planes would work. It’s exactly the motion of the new manual choke you put on. Hope that helps. ;-)
Your future efforts make my welding shed fab project this morning very laughable. This stuff gets me up and going every morning I’m at the cabin. Thanks man, freezerburn
Glad you got it figured out. The true troubleshooting videos on RUclips are the best. SMA, Ivan @ PHAD have a bunch of them. Love to see people work thru a problem and actually diagnose them. Not just throw parts at them. Thanks for bringing us along even if you were struggling.
Watch wes work is among the best
@@lorenzo6045 Agree with that WWW. I really like FarmCraft, but WWW is on another level.
@@CWhitmer22015 I watched 4 WatchWesWork videos now... how is he on another level? He even starts the parts-cannon right away, instead of doing the diagnose first. I would agree with South Main Auto Repair (Eric O.), but WWW seems pretty much on the same level like FarmCraft in terms of how he approaches such an issue. Did I just get unlucky with my videos?
Great video! As for the chain, unless there is something about it that feels concerning when operating it, I would leave it alone. If you feel like it moves gritty, too much resistance, inconsistent, or anything along those lines, yes, a proper inspection and maintenance is worthwhile. If its performance doesn't show any sign of concern, it's probably not worth the effort.
You know that in RUclips land, content is king. The chain is a major project that has not been in a RUclips video as of yet. His problem finding skills will make a video interesting to watch.
You will regret it likely but there is peace of mind when operating machines like this...but we will enjoy it!
Don’t take a chance of it not starting if you’re all the way up in the air you don’t want a semi down the boom spend about $35 get a servo and a small remote for about $35 hook it up and be like a Keyless entry to your car Bluetooth hang it in the basket don’t lose it. Click the choke on click the choke off. That’s what I do on mine. It’s beautiful in the winter time. Put the keyless entry button in a Ziploc bag so it doesn’t get wet.
A detailed boom chain inspection would make a good video. In the meantime, keep a rope ladder in the basket. ;)
Choke issue solution gave all of us relief, not just you! Fantastic! Great perseverance!
I would be in the "if it ain't broke, don't fix it" camp.
But that's just me; on something that large!
However, I'd love to see the project cause I know you can do it!
I'm not a mechanic by no means. But I work on my equipment. Sometimes I get into things that I'm not familiar with and need a little help. When I get into something that I don't know much about people like you help me get it fixed. And sometimes your viewers help also. You have a great channel and great people-watching. Keep putting out the videos I enjoy watching them. God bless you and your family and your viewer's brother.
I have had plenty of equipment and vehicles that just took a ton of work to get in tip top shape. Thank you for sharing your process. We have all been there and it makes us feel better seeing someone stick with a difficult repair.
Go for it John, besides when you get that done you’re pretty much have a new bucket lift. Then only thing left is a new paint job
Hey John! I really enjoy your RUclips channel, it is the best, most diverse, entertaining channel I come across so far. I'm an old 80 year old disabled Vietnam infantry veteran who just watches You Tube for enjoyment instead of actually doing any work. Keep the videos coming so I'll have something to do. Thank you from chilly SE Florida...
It’s not the struggling that I enjoy watching, as much as the success you achieve… eventually!
Cheers from Tokyo!
Please take the boom apart. That would be an awesome video. I have faith in you John!
You may not know what you are doing when you start into a project but in the end you show and teach very well. Thats why I enjoy your videos. And you make it funny once in a while. 😊 Not running down rabbit trails too much is nice.
My god...the mini roll of tape...this made my day. Going right into my camera bag rightnow. This works with graffers tap too.
Your perseverance is what I enjoy not the struggles.
It’s not the struggle alone that most people watch you for. It’s the ability to not give up and overcome that struggle that people watch you for. It’s rare to see people like that anymore and the ones that have that trait in us but not the means or ability to do what you do watch it for the slightest bit of that feeling you get when you finish a job most would just give up on and buy something new instead.
I agree
One experience I had from my old days working on engines is that when something is hard to start check your fuel pump pressure assuming you have a mechanical fuel pump. If there is a slight opening in the diaphragm the fuel runs back to the gas tank. The vehicle will run but it's hard starting because it doesn't have the fuel available right away to the carburetor. So if you have a mechanical fuel pump check the pressure.
Thank you for another great video. Love your fur-babies. I asked Father and prayed if he might help momma cow with her hip pain❤️🙏😞 He always heals me if my wife prays and he always heals her if I pray. Hopefully he’ll heal momma cow❤️
I'm a retired US Navy F/A-18 combat pilot who can drop a bomb through your chimney from over 10,000 feet and now an airline pilot who can land so smoothly some passengers don't even know we've touched down and so I watch FarmCraft to remind myself just what a dumbass I truly am. REALLY enjoy your channel, always a thumbs up.
Whaaat? Hahaha. Dumbass? I think not!
@@FarmCraft101 Oh yes! If my life depended on being able to do what you do, from making canons to rebuilding engines, they may as well take me out back and shoot me. Keep doing what you do and your channel will have over a million subscribers I'm sure. One of the best, johnson jokes notwithstanding.
ed here, bought oldtrex 40 footer when retired to trim my trees with. had lots [fun] working on it. it was diesel with a remote wire/box and boom control. the izuzu diesel ran perfect wit new glowplugs to start. once i was up high/ lost control, manage to get down even when all oil blew out main up/down cyclinder. lost barrel oil down boom-fun was getting the 20/40 extension cyclinder out to rebuild! after trimming/ downing several trees decided lift was too complicated-dangerous-old, sold it for twice what i gave $2500. it had too many old hoses to worry about blowing out! requires ace mechanic to work/ make safe-not me.
John,
Glad to see you've finally tamed the beast. No charge.
The saga of this lift has been one of my favourite stories of the last year. I'm from a UK farming family (sold up now, blame Brexit) and spent some time as a kid (back in the 1980s) in the workshop making mechanical problems worse whilst our fitter rolled his eyes, swore extravagantly and eventually grudgingly nudged me in the correct direction (most often laughing at how a brainiac like me could be so stupid). Thanks for bringing us your problems and solutions. Now live in Whistler, BC - not much farming around here.
Becoming a Friday afternoon at work tradition to watch your video after lunch.
Aaaand mr Johnson makes his return. I am way to happy whenever he turns up. Maybe I'm still 12 mentally while actually turning 60 this year...🤔😂🍻👍
Since you're already in the swing of fixing things you might aswell do the chains and whatever else may need attention, rather than wait for the inevitable failure at the most inconvenient time/place possible. Thanks for taking the time to bring us along and explain things along the way, keep it up.
I love all of your work. You are an excellent mechanic and very inspiring. I really hope you don't do the boom. I was a Crane operator for 35 years. I've seen many pieces of equipment repaired and I've also seen these mobile booms repaired. That is a very big job that requires some specialty equipment in my opinion. Great work great videos.
Wow that’s awesome that some people caught that arcing in the video!! Good eye.
Hi John. Some suggestions from Germany to you . I have repaired machines like this in the 90s .But when you take it all apart
you will find chains that are a little bit rusty but they dont fail .I would install some grease nipples in the boom so that you can lubricate the chains .I would replace some gliding pads of the boom if they are too thin .You can reach the pads without dismanteling all .For dismanteling all of the boom you need to have a big shop floor with a crane of 5 Ton capacity under the ceiling .You have good tools(excavator and you tractor) but these are not heavy enough to handle the boom .Only if the cylinder inside the boom starts to leak strong ,than you have to react .Give this nice machine a little bit of service(i think it was missing it for a long time) and it last for some years and will help you good on your projects .The only thing that is dangerous on this kind of
machines is driving fast over bumps .It can easily shoot you out of the basket .
So cool to meet the girls. They look pretty happy. You are obviously the kind of humane person who knows how to treat and love the animals who give their all for you.
Also, as a person who has spent most of his life as an amateur mechanic messing with old cars (the kind with carburetors) I have concluded that carburetors are the ultimate mechanical curse (even worse than the Chevrolet Vega). We of mechanical inclination should say a daily prayer of thanks to the deity of machines for mass production of fuel injection. BTW, your trouble shooting skills are top notch. Well done.
I think the biggest thing that might have made a difference in your diagnosis of the hard starting would have been to see the original carb setup. My experience with electronic chokes is that they are simple and reliable if adjusted correctly and functioning correctly. Usually, the choke valve would have slight spring pressure on it when closed (cold). Once the engine starts making vacuume, a servo would pull it open a little bit to allow it to start and run. As the coil warms up, the choke would open more and more until there was no choke action at all. Someone screwed you at some point by deleting someting or modifying something that really needed to be there and working. If you could find another lift of the same model, look to see what's there and figure out what yours is missing. Just my 2 cents. 😀
I had a 93 Nissan Sentra that started giving me all sorts of engine running problems. I finally figured out that you could pull the codes using the dash lights and when I did that it showed the Engine Temperature Coolant Sensor was bad and the wires had corroded. After I replaced it and repaired the corroded wires and connector it ran great. Rainman Ray Click!
You are the one to handle a repair like that, and for us who will see it... I am thrilled to see that and i am sure many others will as well. DO IT!
Finally a video i can assist on. Firs thing, the choke isn't necessary if you have some way to feather the throttle. My first car was a 1985 Corolla with a 1.6l carbureted engine. I removed all the emissions stuff and drove it through Chicago winters with no choke. On the very cold days i had to lightly feather the gas to get the accelerator pump to push extra fuel in. It's a crutch to fix the air fuel ratio since you can't remove air using a choke anymore. I guess you could probably figure out a Bluetooth small scale electronics way to use a solenoid of some sort on your manual choke cable and have a controller on the boom.
As for the boom lift main cylinder and chains, i operate a crown turret truck for a living. Look up a crown tsp you'll see them. Our main mast is just like your boom lift, cylinder and chains to lift into the air. The chains and cylinder are pretty much non serviceable because by the time you need service the machine is hardly worth anything. We have 1 machine that has bad roller bearings and the cost of repair is more than what the machine is worth, not to mention the needed crane to tip the mast on its side.
In your case i would place the boom parallel to the ground and if you have a nice flat driveway of some sort you can probably make a rolling cage that can hold the boom as you slide them apart. If you do go through with this job make sure you also replace the rollers. New chains are nice, new rollers make it feel pretty good though.
Happy to see you stuck with it and ultimately got it all fixed up. What a satisfying result!
My dad was a chevy man. His thoughts for sure, BOAT ANCHOR, put a chevy engine in it so you can go to work. Maybe? Great work trying to keep a ford running.
in regards to the boom lift repair you talked about I would like to remember what they told us in music appreciation class: "if it's not Baroque, don't fix it".
Please thumb up so John can see this idea for a remote choke. In order to get platform choke control, you may be able to buy a cheap RC 9 gram servo and control it with an RC servo tester on the platform, its just a single potentiometer and very cheap. I have no idea how the control signals will work over that long of a distance, as these things only work on 5 volts. If the voltage drop is too much across that long of a distance you may be able to use some kind of level converter closer to the carb to make it work properly, or maybe just run the pot to the boom, and leave the servo tester on the platform, it may work because they work off the changing resistance values and you just may get enough swing even with the added resistance of the extra long wires, or just run thicker wire to limit the resistance drop. Another idea is to also just use a 12v solenoid to push the plunger in and out, but that would limit the choke to only 2 settings, say half choke and no choke. it defiantly would be nice to have confidence in being able to start the motor from the platform no matter how long you are up there, in any conditions. Good Luck.
As usual, your video is rife with opportunity to crack wise and be otherwise crass, tacky and/or crude... but I'm going to pass this time. Instead, I'll simply say, "Job well done!" Whittling away at one problem after the next and not stopping until you have results or at least answers.
John, I suspect it's your TENACITY that inspires me as much as your total combined skill set. And like all of the good farmers that I've known in the last 59 years, you are most certainly a jack of all trades and a master of none, but still better always than a master of one! And because of your videos, there are at least 361k people out there with a much higher respect for the craft of farming!
KUDOS!
Hi John, you may want to change that timing belt. If they are a few years old they will break and then you have big trouble.
Also the manufacturer says the chains in the boom need to be inspected every 2 years for rust, wear, or out of adjustment. One other thing on those is to make sure the chain sheaves are still able to take grease and are not worn down.
I have worked on these for years.
Not here to see the struggle but i do enjoy the learning experience and the resourcefulness
Taking the boom apart would be a huge job. Anything is possible with time and patience. If the boom is fully extended are there any inspection covers at all?
Curiosity killed the cat, but satisfaction brought him back. 😊 Buenos Aires, Argentina.
It's amazing how happy I can be for you....... you fixing YOUR stuff....amazing Great work FC!
Wow what a job this lift is! You know what they say, "If it ain't broke don't fix it." That being said, it will make a fantastic video as well as give you complete piece of mind...especially when you are 80 feet in the air. Great video John thumbs up.
It might be a editing artifact, but it seems to me that the limpy cow's leg seems to kinda "snap" right at the ankle when she is puting all the weight in it, right at about 17:24, might be worth for you to take a closer look at it
Woah...that does look like the ankle is favoured...and when weight is applied...pops straight. (Makes me shiver a bit...as I have a similar ankle! :) )
Hi there, I really enjoy your channel and all the videos you put out. I am diy fanatic myself but not into all the heavy gear you work on. But it is always enyouble to see skilled people like yourself troubleshooting different problems. Gives me both a good time by the computer and input on how to solve my own problems. Keep up the good work and I wish you a great weekend all the way from Sweden.
As I understand it the chains are only under tension while the boom is telescoping. You finally got that beast running good. I'd get some solid use out of it before I'd start taking it apart again.
You might be able to use a solenoid choke like they use on a lot of boat motors.
Nah, he's happy now. Soon he will learn exactly how much choke to use with the temperature as his guide.
It's a good bit of kit. Well worth the effort. I'm in NZ if I was closer I would come give you a hand. Keep up the good work.
Living in Minnesota, I've found that having a heated battery wrap and a trickle charger is much more effective and efficient for a gasoline engine in cold weather than a block heater, if you ever decide to winterize your lift.
nice job, i would check the chains out, just for your own safety
In the middle of ripping it apart you will regret it, but not when you found issues and when it's back together. Go for it. 👍🏻
Greetings from Germany.
Having seen the multitude of damaged, scored and rusty hydraulic rams which Kurtis on Cutting Edge Engineering (Australia) is presented with, it is imperative you inspect the ram, cylinder, hoses and chains. Wouldn't matter so much if it was a ground based machine - you'd run it 'til it failed; but this is a real safety issue - you're 60 feet up in the air and even with 'fail safe' you're not going to 'feel' safe. It's a life thing so go to it - and I'm sure going to enjoy the ride! All the best, Bill B (UK).
I know the engine starting problem was the video. But I never get tired of the cows new grazing pasture!
John,
Have you considered the possibility of building a linear building(s) starting at your whole house burner. Maybe having a concrete pad surrounded with a sidewalk having: wood burner..split wood storage..splitter...log storage area....raised concrete area for the sawmill (so that the sawdust can be swept off the work area and onto a spot where the sawdust can easily be cleaned-up)....sawmill blade sharpener/tools storage/work area (with railroad rails imbedded into the concrete - The idea is to cut lumber and then stack it directly onto a railroad flat cart that can be rolled into the kiln.) leading to...lumber kiln.....leading to wood storage for kiln dried lumber.
Thanks Farm craft for another amazing video. Yes, please inspect the chain and other parts in the boom. Of course it's not an easy job, but It's better to be safe than sorry
go for it, we love to see you overcoming the struggles and you will be with a 100% inspected lifter
Pleas show us the inside of the boom!!!
Thanks for adding more knowledge about trouble engines!
The process lead you through some needed repairs. Now you have a great running engine. Manual choke for the win. Well done! Maybe test it a few times from the platform at ground level before you go up.
Thanks for all your work and as a non farmer i do love the cow breaks, used to visit my uncle Marts farm in pa and shifted hay and helped calve, as a kid it wasnt work it was fun stinky fun
I’m so happy for you!
What a freaking nightmare.. I hate intermittent problems too
congratulations
I’ve done a few chain jobs in my time. Most of them were on F & G series JLGs.The H series boomlift chains seem to last a lot longer. If I were going to do a chain job now, I would do an abbreviated chain job. What that means is to check the first 2 feet of chain and see if there’s any elongation in those first few links that go completely over the sprockets. Those links get used way more than any of the others. Id also check for play in the sprockets no matter what. That being said, I think you should do a complete chain job since you mentioned in previous videos that you might have to do a cylinder repack as well. And along the lines of repacking, the telescope cylinder. The problem you described might be the holding valve or counterbalance valve. There is a way to troubleshoot that. Raise the boom up all the way. The telescope out about a foot. Disconnect the return line. If you get a steady drip out of return fitting on the counterbalance valve, then the counterbalance valve is the problem. Again the manuals referred to the counter balance valve as a holding valve. you might have a bad counterbalance valve and a bad piston seal in the telescope cylinder. But the ideal thing to do is to correct the counterbalance valve problem first.
The mini roll of tape is PURE GENIUS
I've been watching Farm Craft for six months. This is the first time I have seen him do farm-stuff.
Great videos, I’m always impressed by how you approach a problem. The cylinder and chain system in there is much like a forklift boom. The rod end of the cylinder is connected to the top end of the first stage along with a set of rollers,. One end of the chains are fixed to the back of the main boom, around the rollers and the other end to the back of the jib. The cylinder pushes the first stage which then pulls on the chains which pulls out the jib.
Hiya John , I've always been impressed with your diagnostic , engineering and mechanical skills . I also much appreciate the little devil on your shoulder that tells you to "f**k the consequences , lets tear it apart". So..... I'm looking forward to your upcoming boom video. We all know it is going to happen 👍 Seasons greetings from Merry England.
I am getting to know your farm pretty well. I saw the scar from the monster tree. I saw your fields and the pond. I saw your porch and fireplace. It's getting to be like "Disneyland for Adventure". [I know you got the money to repair the Nissan. I am glad we could be part of that.] Carry on good sir!
Your fight with that carburetor reminded me of a single barrel carb on a '71 pinto that was just unfixable. It had a vacuum choke pull off and a bimetallic strip heated by engine coolant. I finally shoved a plastic fuze puller down the card throat to keep it open. Seems like you had to adjust the choke plate with a Ford special tool (or a drill bit) to allow some air through even when fully choked. Car finally went to the scrapyard before I got the carb sorted out.
You might struggle, but….you persevere. That counts for a lot and you never brag! Says a lot about you.