This machine is called a warper and it is in a textile plant. Hundreds of small rolls of thread or yarn as we called it are hanging on racks behind this large machine. They are wound onto this large spool or beam as it is called in the industry and provides hundreds of ends that will later be weaved into cloth on a weaving machine. She was cutting off old thread from the last time the spool was used and starting the new ends running onto it. It looks like she left her hand resting on the beam as it was starting to turn and when it was speeding up her hand slipped into a roller that presses against this beam behind it. In the foreground the orange machine is a similar model and it has a safety bar in place in front of it because it has been running. When you are first setting it up the safety bar has to be removed to get the threads started onto the beam. There was a woman at my plant who had a similar accident but it completely degloved the skin on one of her arms from the elbow down to her wrist. She almost bled to death on the floor lying there. Here's a similar machine close up: ruclips.net/video/JG1Tt_jdmxo/видео.htmlsi=o7Pj9XSdZBMQxx51
Я один раз хотела очистить печь где гриль складываться автоматически и чуть не зажарила руку по локоть , хорошо реакция быстрая, рядом коллега побледнел
Are u ooraid now, u was lucky to not lose ur life, that machine is very dangerous. Take safe work np1. I wish u very good christmas and god gift to us plessing jesus
@pakwan3793 this machine is called a warper. She was removing some previous waste from the beam before starting a new beam of thread that will later be weaved into cloth. It looks like she started the warp turning and it starts slow and gets faster. She left her hand resting on top of the "beam" and it started to pull it back into a secondary roller that probably crushed it. It probably got caught on the thread for a second and that was enough to pull it in. Then she jerked it out really quick. Probably was crushed a little and the threads are sometimes enough, especially if she pulled against it, to slice into the skin. I worked in a department a little ways from here in a textile plant for 26 years. I never ran these machines but they were notoriously dangerous and one woman had an arm completely "degloved". Meaning she lost her skin from her elbow down to her wrist in an accident similar to this but much worse. She almost bled to death. The same type machine of an orange color is stopped in the foreground. You can see a safety bar in front of the beam of thread or "yarn". While running, this provides some protection, as bumping it stops the machine. To get close and begin the rethreading process, this bar was likely removed from her beige warper temporarily. While running, the RPMs on these are incredibly fast! This link shows a similar warper up close: ruclips.net/video/JG1Tt_jdmxo/видео.htmlsi=o7Pj9XSdZBMQxx51
Exacly what i thought about first seconds of this video. You mean the horror movie from 1994, right? Im from russia and knew only russian name of that movie, whatched it as a kid. After that, even driving near any factories by car or bus was scary 😅
What's odd about watching these videos is I'm more aware of what machinery can do to human beings--prior to this, I thought "It won't happen to me--I'll never be spun around in circles by a lathe--machinery is good and kind and wants to help us--it doesn't want to hurt anyone." Like my neighbor last night--he had one of his criminal buddies check-out his fucked transmission (he has no idea how to fix but tried, anyway, probably when he was drunk which is 24/7/365 for him). The inmate he called for help got under the vehicle to look with a lit cigarette in his face "I thought: Here we go: About to have another RUclips video about safety."
She’d probably done that procedure a 1000 times but it just takes one second of complacency! Hope shes ok!
This machine is called a warper and it is in a textile plant. Hundreds of small rolls of thread or yarn as we called it are hanging on racks behind this large machine. They are wound onto this large spool or beam as it is called in the industry and provides hundreds of ends that will later be weaved into cloth on a weaving machine.
She was cutting off old thread from the last time the spool was used and starting the new ends running onto it. It looks like she left her hand resting on the beam as it was starting to turn and when it was speeding up her hand slipped into a roller that presses against this beam behind it.
In the foreground the orange machine is a similar model and it has a safety bar in place in front of it because it has been running.
When you are first setting it up the safety bar has to be removed to get the threads started onto the beam.
There was a woman at my plant who had a similar accident but it completely degloved the skin on one of her arms from the elbow down to her wrist. She almost bled to death on the floor lying there.
Here's a similar machine close up:
ruclips.net/video/JG1Tt_jdmxo/видео.htmlsi=o7Pj9XSdZBMQxx51
у нас была похожая ситуация, оторвало кисть руки.
Holy crap.
Degloving injuries are horrendous.
I keep pausing the video because I'm really not up for whatever is about to happen--TBot's spoiler did its job.
holy fuckin shit balls, I couldnt have imagined anything like this
Я один раз хотела очистить печь где гриль складываться автоматически и чуть не зажарила руку по локоть , хорошо реакция быстрая, рядом коллега побледнел
Be careful…be cautious to what you do all the time.
I wish you a speedy recovery...
Lucky she didn't get eaten by the roller!
1:28 - I think she must have lost her fingers or got them crushed
Took a flattened hand like a champ.
Only because you can't hear him screaming in this mute video
She even didn't look at it as she just grab down under......
Yeah what happened & when at what time
Are u ooraid now, u was lucky to not lose ur life, that machine is very dangerous. Take safe work np1. I wish u very good christmas and god gift to us plessing jesus
hope she's ok. could'nt really see much of what happened
her hand were crushed upward to her forearm
Looks like they got their arm stuck in some industrial roller machine. Crunched the whole thing up. Probably lost that arm for good.
@@RoachDogg_JRwas she doing some cleaning up work whilst the machine was running?
@@pakwan3793looks like she was setting it up, powered it on, turned it back off to make adjustment but it never powered off and got her
@pakwan3793 this machine is called a warper. She was removing some previous waste from the beam before starting a new beam of thread that will later be weaved into cloth.
It looks like she started the warp turning and it starts slow and gets faster. She left her hand resting on top of the "beam" and it started to pull it back into a secondary roller that probably crushed it. It probably got caught on the thread for a second and that was enough to pull it in. Then she jerked it out really quick.
Probably was crushed a little and the threads are sometimes enough, especially if she pulled against it, to slice into the skin.
I worked in a department a little ways from here in a textile plant for 26 years.
I never ran these machines but they were notoriously dangerous and one woman had an arm completely "degloved". Meaning she lost her skin from her elbow down to her wrist in an accident similar to this but much worse. She almost bled to death.
The same type machine of an orange color is stopped in the foreground. You can see a safety bar in front of the beam of thread or "yarn". While running, this provides some protection, as bumping it stops the machine.
To get close and begin the rethreading process, this bar was likely removed from her beige warper temporarily. While running, the RPMs on these are incredibly fast!
This link shows a similar warper up close:
ruclips.net/video/JG1Tt_jdmxo/видео.htmlsi=o7Pj9XSdZBMQxx51
Xin chào ❤
It was God's will.
i dropped a roll on my leg my first week workin on the press
There should be requirements for dresssing
Triste
Not much of a description.
Anybody ever seen the Mangler..
Exacly what i thought about first seconds of this video. You mean the horror movie from 1994, right? Im from russia and knew only russian name of that movie, whatched it as a kid. After that, even driving near any factories by car or bus was scary 😅
@@WsunHuiWchaiWinSuhim ..Yup you got it..The Hadley Watson..Model 6 Speed ironer and folder..
@@andynorvell4953 it was a moment, where i realized something. In the future i will be anything, but factory worker 🤭
@@WsunHuiWchaiWinSuhim ..kool..lm a mechanic at a bowling alley..l have a few machine videos on my channel bout how bowling machines work..
Back when I first watched that movie that was so horrifying and disturbing. Watching that machine fold people and stuff was just horrifying.
1:29
I'll bet she won't do that again!
What's odd about watching these videos is I'm more aware of what machinery can do to human beings--prior to this, I thought "It won't happen to me--I'll never be spun around in circles by a lathe--machinery is good and kind and wants to help us--it doesn't want to hurt anyone." Like my neighbor last night--he had one of his criminal buddies check-out his fucked transmission (he has no idea how to fix but tried, anyway, probably when he was drunk which is 24/7/365 for him). The inmate he called for help got under the vehicle to look with a lit cigarette in his face "I thought: Here we go: About to have another RUclips video about safety."
Legend has it, she's still sitting there... staring at her hand.
Is this supposed to be Funny because it's not😡
ピタットハウスに手付け金を横領されて困ってます
Her fault 100 %........she just casually grabbing without watching at it.......
What happened?
looks like worker she has lost her fingers or part off her hand.. thats why we have safety barriers/gards with stop man switches.🤕
@@MRJWC2332 I mean didnt look like she lost finger to me, looked more like her hand got crushed.
阿娘喂啊～
no health and safety or trained first aiders @???
only in China
oh boy, I bet you don't know many factories around the world
I think this is Vietnam or Cambodia.