Размер видео: 1280 X 720853 X 480640 X 360
Показать панель управления
Автовоспроизведение
Автоповтор
Wow!!!👏
That would be great if you mod it in the right way 😉
are you using mainblade from xk k120???
Yes
Tx của em nó cứ nháy nháy số làm bay k ổn định fix kiểu gì v bác
Có thể hết pin, hoặc tx bị hư nguồn làm sóng chập chờn..vv. Bạn liên hệ nhắn vào fanpage để mô tả chi tiết cũng đc
Jesus that power is crazy. How did you rewind the motor?
Rewind with delta fomular, about 15000KV 😊
@@rchelicopterspace_0309 Is there a way to get the metal gear out of the motor easily?
@@navifpv7411 keep tight the bell of motor, then take the tool and clamp the pinion tightly and hold both sides tightly, then rotate and pull
@@rchelicopterspace_0309 So you hold the pinion with pliers? I feel like if i hold too tight it is going to tear and break the pinion.
@@navifpv7411 Place a thick piece of cloth around the pinion, then use pliers to clamp the outside to ensure there is no metal contact.
Wow!!!👏
That would be great if you mod it in the right way 😉
are you using mainblade from xk k120???
Yes
Tx của em nó cứ nháy nháy số làm bay k ổn định fix kiểu gì v bác
Có thể hết pin, hoặc tx bị hư nguồn làm sóng chập chờn..vv. Bạn liên hệ nhắn vào fanpage để mô tả chi tiết cũng đc
Jesus that power is crazy. How did you rewind the motor?
Rewind with delta fomular, about 15000KV 😊
@@rchelicopterspace_0309 Is there a way to get the metal gear out of the motor easily?
@@navifpv7411 keep tight the bell of motor, then take the tool and clamp the pinion tightly and hold both sides tightly, then rotate and pull
@@rchelicopterspace_0309 So you hold the pinion with pliers? I feel like if i hold too tight it is going to tear and break the pinion.
@@navifpv7411 Place a thick piece of cloth around the pinion, then use pliers to clamp the outside to ensure there is no metal contact.