@@epicairguns Would it make a difference if it was just tightened by hand? Because your system, in my opinion, is perfect and approved. I've already tried shooting a shot without screws tightened on my old gun (60Joules) and the barrel didn't even move 1 mm.
@@starlightHT It really depends on how much you are able to tighten it by hand. When we tried to shoot with "loosen barrel" (someone forgot to tight it well), the accuracy was much more worse. When we tight it properly there was a different result immediately.
@@epicairguns I'm less ashamed now, but it's happened to me that I forget to press the suppressor and barrel when I'm working and tuning, if it shows positive results we just have to keep it.
@@starlightHT I tighten with just 1 pin, the shaft of a broken screwdriver that fit perfect into 1 hole on the back of the barrel, this have worked just fine for me and i do not use very much force tightening it. The barrel tensioning system i also have pretty light, lighter than factory, i had it off once to measure barrel as i was thinking about getting another barrel blank. I am only missing if i mess up or aim at something too small for the distance, or the limitations there is in 4.5 mm slugs that unlike larger calibers do not have any choice in size, Zan and JSB work fine for me, for some reason also in the Two i can not get H&N slugs to work. Love shooting my Two
This is hard to answer. There are several points that affect the acuraccy. First you need to find the right velocity for each type of slugs. Then you have to fine tune the velocity spread with the hammer spring according to the regulator setup (you should have around 1-2 mps difference). Each barrel is a little bit different so you really have to try several options. And you should adjust the speed for each different slug you will try. Just the difference of 10 mps can make a 5 - 8 centimeters difference at 50 - 75 yards.
I hope you can make a video on how to match the size of the bullets. How to adjust the accuracy of the EPIC TWO. This will be more useful for us novice players.
These videos are really useful. Keep them coming.
Excellent way to teach someone how to change calibers🤙
When will the wood stock version be available to the USA
Hi, they are already available for few months so it depends when US dealers order these versions.
I laughed so hard when I heard Hammer use to remove the barrel and then my mouth dropped open.
Even with the hammer you can be gentle to your rifle 🙂
@@epicairguns Would it make a difference if it was just tightened by hand? Because your system, in my opinion, is perfect and approved. I've already tried shooting a shot without screws tightened on my old gun (60Joules) and the barrel didn't even move 1 mm.
@@starlightHT It really depends on how much you are able to tighten it by hand. When we tried to shoot with "loosen barrel" (someone forgot to tight it well), the accuracy was much more worse. When we tight it properly there was a different result immediately.
@@epicairguns I'm less ashamed now, but it's happened to me that I forget to press the suppressor and barrel when I'm working and tuning, if it shows positive results we just have to keep it.
@@starlightHT I tighten with just 1 pin, the shaft of a broken screwdriver that fit perfect into 1 hole on the back of the barrel, this have worked just fine for me and i do not use very much force tightening it.
The barrel tensioning system i also have pretty light, lighter than factory, i had it off once to measure barrel as i was thinking about getting another barrel blank.
I am only missing if i mess up or aim at something too small for the distance, or the limitations there is in 4.5 mm slugs that unlike larger calibers do not have any choice in size, Zan and JSB work fine for me, for some reason also in the Two i can not get H&N slugs to work.
Love shooting my Two
it can really fire with safety on? because otherwise doesn't have sense mention full degassing repeatably
My EPIC TWO is .22 caliber. I adapted all slugs. But none of them have accuracy. What is the reason? I want to ask what size slug size is needed?
This is hard to answer. There are several points that affect the acuraccy. First you need to find the right velocity for each type of slugs. Then you have to fine tune the velocity spread with the hammer spring according to the regulator setup (you should have around 1-2 mps difference). Each barrel is a little bit different so you really have to try several options. And you should adjust the speed for each different slug you will try. Just the difference of 10 mps can make a 5 - 8 centimeters difference at 50 - 75 yards.
@@epicairguns Thanks for your patience. My tube is 550 CZ. Also, what size are the inlet and outlet data? So I know which data blocks can match up.
I hope you can make a video on how to match the size of the bullets. How to adjust the accuracy of the EPIC TWO. This will be more useful for us novice players.