And we need at least 10 SSl bus compressor plug-ins, 8 Pultecs, 9 Neve eqs, and 5 tape emulators. Plus saturation plug-ins. $2500 later, still don't know how to mix.
@@WisdomHouseCreative get it i just don't know where exactly I should be .. only referencing to the best songs in your genre .. unless you take the real certified courses from an institute or college
Analog warmth is a construct of the Government-Record Label complex aimed at making us toil over perceived natural harmonics and saturation, while Taylor Swift sells three trillion albums using only a DAW and ChatGPT, which she and the NSA invented after 9/11. Also, her albums were recorded somewhere in Area 51. The truth is out there.
@@noteimporta2880 Studying production and sound engineering at University is really not something I would advise, waste of money, here in the UK at least.
Ive been making metal for two years now and I have picked up on many of these things without ever being taught, but this video taught me the reasons for some of the things and a ton of small tips and changes I could be making. Knowing the reasons for things allows me to mske my own educated decisions whilst I am mixing if something doesn't sound quite right. Thank you for the video!
I have been [re]mixing a song, one of the first songs I did for the album. 4 days. This video is a check list of all the pain and toil I have endured for 4 days. You reaffirmed, basically what I just learned today! At the end now, I'm not even sure I want to release this new version; sometimes, songs are better left alone. Also, sometimes it is better to take one night to mix, instead of a week. Yes......
this is one task that can test the limits of the human brain and there is no substitute for some rest and recovery time after a hard workout. dunno about you but this is one of the very few exercises in my life where i CANNOT avoid or prevent my mind or ears from playing tricks on me. ever get it just right after hours of fine tuning and then realize a week or a month better that it sounds worse than before you started?
@@420gzuz Absolutely and it drives me crazy. I just re-did the first song on our up=coming album. I literally just put an arpeggiator behind the voice and I thought it was done. Now, that song has more production, but I learned something; instead of leveling the guitar and the synth even levels the whole song, I am taking out instruments when I only want the guitar heard, and only synth when I want that heard. Some of my songs just sounded like a bunch of noise.
Tego mi trzeba było...miks czy mastering to narazie dla mnie "czarna magia" ale dzięki waszym filmikom moja wiedza powiększa sie, dziękuję, pozdrowienia z Polski 👍
If you're not a mix engineer, a mix to put it sort of simply, is 90% volume balance. The overall balance of sounds against each other (volume, panning), the volume of frequencies within a track (EQ) against other sounds and the volume of certain parts of a track like the transient, body and tail (compression) against other sounds. The other 10% is FX (delay, reverb, etc). Theres a whole world within those things to learn, but if you remember that simple concept it makes mixing a bit less intimidating. Happy mixing everyone! Go create some good vibes :)
This is probably the single best condensed explanation of what "mixing" means I've ever read. I couldn't wrap my head around it for the longest time until the day I realized that most of whatever happens after recording already counts as mixing by default. Mastering is the quirkier, less intuitive phase for beginners, but it's arguably much simpler to execute
@@weebto A proper mix IS your master mix. Mastering is holdover from when the cutting engineer had to alter your master to fit in the grooves (really). Today's 'mastering' is a relatively new phenomenon to pretty much repair bad mixes. That brings us back to.... a proper mix IS your master. Done. Bill P.
@@RocknRollkat thanks for the extra info. Although, as far as I can tell, that isn't the case anymore, right? Modern "mixing" is gain staging, volume/pan balance, EQ/comp/FX whereas "mastering" means packing the final file up (bringing overall EQ and limiters into the equation), right?
Greetings from aleppo Syria , just rebuilt my studio after the devastating Earthquakes 🥃🤦 guys you're a true blessing to my career , thank you so much !
🎯 Key Takeaways for quick navigation: 00:01 🎧 Mixing is complex, involving many tracks and potential issues. 00:30 🎶 Quality ingredients like good recordings are essential for a great mix. 01:10 🎛️ Organizing the mix session is crucial for efficiency. 02:54 🧹 Listen for pops, clicks, and other issues before diving into mixing. 05:06 🎤 Repair work includes handling plosives, clicks, and mouth sounds. 06:33 🎵 Tune vocals and instruments as needed for pitch correction. 07:55 🥁 Address phase and polarity issues for a better drum sound. 08:52 🌀 Experiment with polarity inversion to enhance your mix. 10:10 🥁 Fix time-of-arrival phase differences for coherent drum sound. 11:00 🎶 Explore sample replacement or enhancement for drums. 11:59 🎧 Trim unnecessary audio parts and use fades for cleaner tracks. 13:17 🔇 Use noise gates to reduce background noise in recordings. 14:12 🎚️ Start building the foundation of the mix with fader adjustments. 16:05 🧩 Use stereo bus compression to glue the mix together. 17:00 🎤 Work on individual track processing, starting with drums. 18:48 🎸 Consider high-pass filtering to reduce muddiness in tracks. 19:38 🥁 Neutron's Track Assistant can help set up processing chains. 21:00 🎙️ Process vocals with tools like EQ, compression, and de-essing. 22:50 🔊 Adjust vocal levels to ensure they sit well in the mix. 23:14 🌟 Reference tracks can provide guidance for vocal loudness and placement. 23:40 🎸 Acoustic and electric guitars benefit from compression and chorus effects, respectively. 24:07 🎛️ Be cautious not to over-process guitars to preserve their original tone. 25:03 🎶 Experiment with panning guitars to create a balanced mix. 25:53 🎹 Pay attention to potential clashes between keys and vocals and use tools like auto unmasking. 26:20 🌟 Set up auxiliary tracks (auxes) for time-based effects like reverb and delay. 27:40 🔊 Experiment with parallel processing on auxes to enhance mix elements, but do it carefully. 29:03 🎚️ Use volume automation to highlight specific elements in the mix. 30:58 🔄 When preparing for mastering, maintain the same format, bit depth, and sample rate as your mix files. 31:45 🎨 Practice listening, experimenting, and being patient in your mixing journey.
Welcome back - you are the best that iZotope has doing these videos. I can watch from beginning to end without going to 2X speed or skipping ahead. Your attitude and presentation is perfect - no fluff or histrionics. Thank you.
Great presentation, but: It would be very nice if you only use music to demonstrate one point, otherwise the background music is very distracting for me.
Really useful and insightful video. Very well articulated. My only issue is, throughout the video he mentions about 8 other videos to watch and I imagine each of those has 8 more suggestions which results in an endless web of videos to watch. Its very overwhelming.
All RUclips videos about mixing assume that the source tracks are already sounding great. With this pre requisite anyone can achieve a decent mix. But the real art of mixing is to make poor sounding instruments and vocals sound great and fit together. And most professionals cant do it because they dont want to spend 2 days to fix a bad vocal or bass recording.
As an amateur electronic music producer who does everything myself, and likely doesn't do it right, these tips are very helpful! My mixing generally boils down to moving reducing the faders of the sounds by factors of 3, which I should probably stop doing because I'm mixing too mathematically rather than properly using my ears. As for effects I tend to just compress everything and do the bare minimum of EQing, again, something I should improve on and actually listen to what I make properly.
And try to get into EQing, e.g. for Drums I read a lot about what their natural frequency ranges tend to be, where to emphasize or to reduce volume, and which frequencies are to completely get rid of. When it comes to Instruments I tend to also cut off as much frequencies as possible and only keep the ones that fit my mix (main+transient). Same when it comes to volume: You can reduce your volume in your mixer but still give it more punch. If you have therefore put effort into the steps above your volume control is just a matter of seconds.
I’ve been doing my own GarageBand projects for about a year now, and I know enough to know that I don’t know anything about being an audio engineer, but videos like this that help outline a workflow are always extremely helpful.
@@tuxievous420 can you pls chill? I have other things that require more immediate financial attention this year. Never said I’m never going to upgrade. I just don’t have $1200 laying around for a hobby this weekend. Gotta have a little insight before you leap to gatekeeping.
@@jarfullofgravitylook it’s okay I understand but if you’re looking up a mixing tutorial then you want to dig deep: I’ve mixed down for artists on the radio. What I was saying is is if it’s a hobby then you might want to rethink it. Again, I am not coming at you sideways. All I’m saying is rethink your stead wgu if you are not all in
So for me, one thing that stood out in this video was the POLARITY SWITCH!! , because I was manually tring to get the kick, in phase with the 808 by fading them and aligning just in that perfect point where a max number of 3 sines would overlap at the same poles. But switching them?! is piece I needed & I've just tried, while watching this video, and I can confirm you get different resonance on the 808, switched and distorsion applied. Would definitely try on layering drums with hats for a more acoustic ...blah blah blah you get what I mean. Thank you so much dude! The sleeping assistant there, got me unprepared hahaha^^
Hi Geoff you are doing an amazing job with your tutorial videos. I've had an Izotope membership for a year and everything works great but there's one thing I can't get my head around. I use EZ Drummer grooves and also bass from the keyboard. Do you still have to do a low cut there? If I don't do the low cut everything sounds too boomy and if I do the low cut it sounds too thin and Ozone raises the bass range enormously in the mastering. Is it possible that the solution is not to make a low cut on the kick and keyboard bass and instead use the Unmasking tool in Neutron to reduce overlays? Thanks a lot for your great work!
Thanks a lot for your feedback! Our product support team will be happy to advise. Feel free to get in touch with us through this form here: bit.ly/izo_prod
I squeak on purpose when I play guitar. It sounds awesome. That's one thing all these videos leave out. Don't make your mix so perfect that you cancel out the human element
the food analogy is perfect! i started using it a few years ago to describe what i was doing to my family who didn't understand. Multitracks: like getting a bag of groceries and a menu to prepare a meal... one assumes that one knows certain skills like knife work, or what 'saute' means, and what order to do things in, in order to get the prefect meal on the table.
This video has it all: I find back every single useful tip I gathered from other sources, and then some more. Thanks a lot: as a bedroom mix engineer, this is going to help a lot!
👌That was so useful.🔥Brought me back in time when I was still in uni learning how those techniques were frequently discovered by accident, like the parallel compression bus. For that matter vinyl scratching too (not important to this topic, but) those are all now an art form of their own, and we have to keep utilising them to make greater art with. 🤩 I'm saving this to take notes from, every time when setting up a mixing session. 🤘😁 Thank you Izotope team🙏
good job izotope. idk why no otha audio companies upload or got semi decent content. literally 0 of the companies that make audio gear that we use and buy , make tutorials and upload content.
@iZotope, Inc. with your quality of presentation you can help a lot of companies with bad tutorial material... I think you know what about I am talking...
@iZotope, Inc. Posted this above but thought that might get lost so I've re posted here.... hope that's cool. I'm a newbie to the PC DAW (been using stand alone recorders since the late 80's though) andci LOVED this video. Is there any chance to do a follow up using mostly DI? I live in a town house community and can't make noise. So I DI everything aside from vocals and acoustic guitar. I've heard others do this with FANTASTIC results. And maybe more does and don't's when recording mono or stereo. For example vocals. Mono up the middle or do a second take and pan hard left and right. Both sound the same in regards to being perceived as being at 12 o'clock.... or straight up the middle. I duplicate my rhythm guitars (play them separately to give that wide feeling) and pan around 5 o'clock and 7 o'clock.... to give room for other instruments. It still sounds like it's coming from the middle but I feel using the panning space just seems smart (even though the other instruments would be in a different frequency range, and probably not interfere with each other).... it just sounds really spacious to me. Any tips on mixing mostly DI would be a real help as I'm finding this a very steep learning curve.... cheers.
I'm a newbie to the PC DAW (been using stand alone recorders since the late 80's though) andci LOVED this video. Is there any chance to do a follow up using mostly DI? I live in a town house community and can't make noise. So I DI everything aside from vocals and acoustic guitar. I've heard others do this with FANTASTIC results. And maybe more does and don't's when recording mono or stereo. For example vocals. Mono up the middle or do a second take and pan hard left and right. Both sound the same in regards to being perceived as being at 12 o'clock.... or straight up the middle. I duplicate my rhythm guitars (play them separately to give that wide feeling) and pan around 5 o'clock and 7 o'clock.... to give room for other instruments. It still sounds like it's coming from the middle but I feel using the panning space just seems smart (even though the other instruments would be in a different frequency range, and probably not interfere with each other).... it just sounds really spacious to me. Any tips on mixing mostly DI would be a real help as I'm finding this a very steep learning curve....cheers.
Amazing clarity of thought!! Thanks for such videos!! One thing I wanted to point out as a budding Mix Engineer - Trusting your ears; and that has training your ears as a precursor. After, years of learning mixing (as a hobby for now to turn it into profession) it was just decision I had to make for myself- Trust my ears. I had to tell myself (after sufficient second guessing and self evaluation) that, if I understand music and sounds therein, I have a good sense of notes and rythm, there's no reason I should not trust my ears. So as you asked, my tip for mixing is to 'make a good listening environment in your room, learn your room and your speakrs and trust your ears'. Then what you said will be totally valid- what sounds good, it IS good. 😊
A good example of this I found recently was having been a mix engineer for my personal projects first and foremost for years, I struggled to commit to a sound on my latest album and instead freaked out and hired a friend who's an accomplished mix engineer to help out. In doing so I realized a lot of what I did I actually loved more than what he was offering initially, that allowed us to talk about it and helped me articulate what about what I was doing actually worked for me and I learned a lot about why I chose what I chose in the first place. Might sound silly to "learn why you did what you did" when you should know why you're making decisions in the first place, but this may be a cool learning exercise if you have the time (and money unless you have some generous friends haha). The exercise being, work on a mix very intentionally until you're happy with it, then bring it to one or 2 other mixers and see what they would do, and if there's anything you can glean from their decisions. For me the goal here wasn't to steal mix tricks or "steal their mix" to map onto my song, because EVERY SONG IS DIFFERENT, that will just never work. That's the single biggest thing I've learned in recent years and it's actually freeing. You don't have to be perfect every single time even tho there are some consistent rules. This process taught me a few broader things to look into and keep an ear out for when starting a new mix, cause it's SO EASY to get stuck in the weeds. It's all about finding that balance between getting wayyyy too detail oriented and focused on meticulous process that "feels" like progress but is just distracting like spending 4 years on a snare sound, vs broad strokes and focusing on bigger picture things like how a snare interacts with the mix bus compressor and sits in relation to your guitar and vocal. If you gota tweak something nerdy, do it quick, and then step back or better yet step away for 10 min and see how it all sits. If you produce your own music like I do, then it's impossible not to tweak sounds to some degree in the production phase before you even get to mixing. I'm still working on committing stuff in that step so that when mixing comes around I can focus on molding those sounds together instead of feeling like "this is mixing so now i have to CHANGE EVERYTHING BECAUSE MIXING". No. Your gut chose these sounds because they felt good, now make them work together in the mix so that the audience gets the best representation of that inital feeling you had, and while this is art so there's no right or wrong technically, I think we're all chasing that initial moment of inspiriation that gets us excited when a song starts working. That's the feeling we want to share with our friends and fans. :)
I sometimes shift the vocals slightly out of phase intentionally to drive it into the reverb realm for just one bar or even half especially in punk or hardcore that normally has one maybe two vocal tracks tops and the amount of instruments reflect the amount of tracks more often than not too so thickness at key moments is very handy and avoids printing effects. Old punks do these kind of things still in the studio believe it or not. Lol 👽✌️
I couldn't agree more. PRODUCTION (for me) is knowing what I want to hear. MIXING is more technical KNOWING HOW TO GET WHAT YOU WANT TO HEAR. I've worked in many studios, I'm not an engineer. with the computer at home I'm FAILING TO GET WHAT I WANT TO HEAR
My new album is produced / mixed and engineered using every plug it. Took me almost 3 months of trial and error to even find a balance. Ty so much for all yall work
Great video, i have always used fruity delay 3 as a kind of stereo andd reverb widener. now i am experimenting with a convolver for enhanced reverb manipulation for recordings that have quite a bit of harsh resonances. just the right amount of reverb can preserve particular distorted sounds that you might want to keep in a mix without compromising the mix. last i decided to use the techinque of adding a compressor to the master bus, that advice is paramount for all kinds of audio engineers!
The problem with people in learning anything us that they want to be constantly assured. Constantly given bread crumbs and have everything written on paper on what to do . Nobody wants to just dive in. If it isnt being explained to them like toddlers and having their hand held, they claim its too overwhelming. I'm self taught in many things, audio engineering, sports, instrumentations, and the list goes on. JUST FUCKING DO IT , OVER AND OVER AGAIN
After correctly explaining the difference between phase and polarity, why on earth do iZotope have a switch in their plugins labelled 'phase' which is a polarity switch? It's the same deal on consoles too, like the Roland MX-480.
With respect to the "dead air" segment, would you say there's any difference between clipping the audio clips, or would simply using a level/volume automation suffice?
I'm using an online software to do the mixing but there is some limitation in the app itself. It is my first project and I'd like to know is that possible for me to download all tracks as a single wav. file and export to Izoptope to continue my mixing. Is that a good idea as my song haven't remove plosives and noise for the vocal but I already do compression, reverb, effects and the balancing for all other instrumental tracks.
Everything mentioned in the first 40sec it's the producer's job. When you sit down to mix that's all you going to do...mix. Fixing tuning,phase or timing that's not the job for the mixing engineer. If you have to fix a problem that could be avoided on the producing or recording stage... Then you producing not mixing.
This video helped answer so many questions; thank you! Most of the content on the web never really talks about the lead-up to the mix. They just magically have perfect-sounding audio tracks to start with. There are a lot of processing steps that need to happen first. I still have many questions, but this video helped point me in the right direction. 🙂
I would learn to mix, but hold on, I'm achieving analog warmth.
And we need at least 10 SSl bus compressor plug-ins, 8 Pultecs, 9 Neve eqs, and 5 tape emulators. Plus saturation plug-ins. $2500 later, still don't know how to mix.
@@WisdomHouseCreative get it i just don't know where exactly I should be .. only referencing to the best songs in your genre .. unless you take the real certified courses from an institute or college
😂😂😂
Analog warmth is a construct of the Government-Record Label complex aimed at making us toil over perceived natural harmonics and saturation, while Taylor Swift sells three trillion albums using only a DAW and ChatGPT, which she and the NSA invented after 9/11. Also, her albums were recorded somewhere in Area 51. The truth is out there.
@@noteimporta2880 Studying production and sound engineering at University is really not something I would advise, waste of money, here in the UK at least.
Ive been making metal for two years now and I have picked up on many of these things without ever being taught, but this video taught me the reasons for some of the things and a ton of small tips and changes I could be making. Knowing the reasons for things allows me to mske my own educated decisions whilst I am mixing if something doesn't sound quite right.
Thank you for the video!
I have been [re]mixing a song, one of the first songs I did for the album. 4 days. This video is a check list of all the pain and toil I have endured for 4 days.
You reaffirmed, basically what I just learned today! At the end now, I'm not even sure I want to release this new version; sometimes, songs are better left alone. Also, sometimes it is better to take one night to mix, instead of a week.
Yes......
this is one task that can test the limits of the human brain and there is no substitute for some rest and recovery time after a hard workout. dunno about you but this is one of the very few exercises in my life where i CANNOT avoid or prevent my mind or ears from playing tricks on me. ever get it just right after hours of fine tuning and then realize a week or a month better that it sounds worse than before you started?
@@420gzuz Absolutely and it drives me crazy. I just re-did the first song on our up=coming album. I literally just put an arpeggiator behind the voice and I thought it was done. Now, that song has more production, but I learned something; instead of leveling the guitar and the synth even levels the whole song, I am taking out instruments when I only want the guitar heard, and only synth when I want that heard. Some of my songs just sounded like a bunch of noise.
Tego mi trzeba było...miks czy mastering to narazie dla mnie "czarna magia" ale dzięki waszym filmikom moja wiedza powiększa sie, dziękuję, pozdrowienia z Polski 👍
Thank you for watching, Aruus! Glad we can make mixing a little easier. 🙏
Ucz się ucz, bo nauka to potęgi klucz
If you're not a mix engineer, a mix to put it sort of simply, is 90% volume balance. The overall balance of sounds against each other (volume, panning), the volume of frequencies within a track (EQ) against other sounds and the volume of certain parts of a track like the transient, body and tail (compression) against other sounds. The other 10% is FX (delay, reverb, etc). Theres a whole world within those things to learn, but if you remember that simple concept it makes mixing a bit less intimidating.
Happy mixing everyone! Go create some good vibes :)
Yess sir 💯
This is probably the single best condensed explanation of what "mixing" means I've ever read. I couldn't wrap my head around it for the longest time until the day I realized that most of whatever happens after recording already counts as mixing by default. Mastering is the quirkier, less intuitive phase for beginners, but it's arguably much simpler to execute
RUclips should implement a bookmark feature, this is gold!
@@weebto A proper mix IS your master mix.
Mastering is holdover from when the cutting engineer had to alter your master to fit in the grooves (really).
Today's 'mastering' is a relatively new phenomenon to pretty much repair bad mixes.
That brings us back to.... a proper mix IS your master.
Done.
Bill P.
@@RocknRollkat thanks for the extra info. Although, as far as I can tell, that isn't the case anymore, right? Modern "mixing" is gain staging, volume/pan balance, EQ/comp/FX whereas "mastering" means packing the final file up (bringing overall EQ and limiters into the equation), right?
Greetings from aleppo Syria , just rebuilt my studio after the devastating Earthquakes 🥃🤦
guys you're a true blessing to my career , thank you so much !
🎯 Key Takeaways for quick navigation:
00:01 🎧 Mixing is complex, involving many tracks and potential issues.
00:30 🎶 Quality ingredients like good recordings are essential for a great mix.
01:10 🎛️ Organizing the mix session is crucial for efficiency.
02:54 🧹 Listen for pops, clicks, and other issues before diving into mixing.
05:06 🎤 Repair work includes handling plosives, clicks, and mouth sounds.
06:33 🎵 Tune vocals and instruments as needed for pitch correction.
07:55 🥁 Address phase and polarity issues for a better drum sound.
08:52 🌀 Experiment with polarity inversion to enhance your mix.
10:10 🥁 Fix time-of-arrival phase differences for coherent drum sound.
11:00 🎶 Explore sample replacement or enhancement for drums.
11:59 🎧 Trim unnecessary audio parts and use fades for cleaner tracks.
13:17 🔇 Use noise gates to reduce background noise in recordings.
14:12 🎚️ Start building the foundation of the mix with fader adjustments.
16:05 🧩 Use stereo bus compression to glue the mix together.
17:00 🎤 Work on individual track processing, starting with drums.
18:48 🎸 Consider high-pass filtering to reduce muddiness in tracks.
19:38 🥁 Neutron's Track Assistant can help set up processing chains.
21:00 🎙️ Process vocals with tools like EQ, compression, and de-essing.
22:50 🔊 Adjust vocal levels to ensure they sit well in the mix.
23:14 🌟 Reference tracks can provide guidance for vocal loudness and placement.
23:40 🎸 Acoustic and electric guitars benefit from compression and chorus effects, respectively.
24:07 🎛️ Be cautious not to over-process guitars to preserve their original tone.
25:03 🎶 Experiment with panning guitars to create a balanced mix.
25:53 🎹 Pay attention to potential clashes between keys and vocals and use tools like auto unmasking.
26:20 🌟 Set up auxiliary tracks (auxes) for time-based effects like reverb and delay.
27:40 🔊 Experiment with parallel processing on auxes to enhance mix elements, but do it carefully.
29:03 🎚️ Use volume automation to highlight specific elements in the mix.
30:58 🔄 When preparing for mastering, maintain the same format, bit depth, and sample rate as your mix files.
31:45 🎨 Practice listening, experimenting, and being patient in your mixing journey.
thanks this is super helpful!
thanks
Welcome back - you are the best that iZotope has doing these videos. I can watch from beginning to end without going to 2X speed or skipping ahead. Your attitude and presentation is perfect - no fluff or histrionics. Thank you.
Totally agree!!
Appreciate it guys.
Great presentation, but: It would be very nice if you only use music to demonstrate one point, otherwise the background music is very distracting for me.
My new "mix agenda very first thing to do" will be now to watch this video again for every new mix session. Thanks Geoff and iZotope!
mixing is so overwhelming AGH
So true but step by step, moving forward 😊
the best mixxing tutorial for not mixers with not ironed shirts i ever seeen
Oh snap heehee ... You see the same thing. Just got through commenting.
Really useful! Thank you
Really useful and insightful video. Very well articulated. My only issue is, throughout the video he mentions about 8 other videos to watch and I imagine each of those has 8 more suggestions which results in an endless web of videos to watch. Its very overwhelming.
All RUclips videos about mixing assume that the source tracks are already sounding great. With this pre requisite anyone can achieve a decent mix. But the real art of mixing is to make poor sounding instruments and vocals sound great and fit together. And most professionals cant do it because they dont want to spend 2 days to fix a bad vocal or bass recording.
As an amateur electronic music producer who does everything myself, and likely doesn't do it right, these tips are very helpful! My mixing generally boils down to moving reducing the faders of the sounds by factors of 3, which I should probably stop doing because I'm mixing too mathematically rather than properly using my ears. As for effects I tend to just compress everything and do the bare minimum of EQing, again, something I should improve on and actually listen to what I make properly.
And try to get into EQing, e.g. for Drums I read a lot about what their natural frequency ranges tend to be, where to emphasize or to reduce volume, and which frequencies are to completely get rid of.
When it comes to Instruments I tend to also cut off as much frequencies as possible and only keep the ones that fit my mix (main+transient).
Same when it comes to volume: You can reduce your volume in your mixer but still give it more punch. If you have therefore put effort into the steps above your volume control is just a matter of seconds.
Little too for logic users - name the tracks then highlight all the regions and pre ALT-SHIFT-N
That will name all your regions to the track name 👊
I see @ManchesterMusic in the thumbnail, I click 🤘🏼
Thanks dude 🎉
I’ve been doing my own GarageBand projects for about a year now, and I know enough to know that I don’t know anything about being an audio engineer, but videos like this that help outline a workflow are always extremely helpful.
Invest in Logic it’s only 200 bucks
@@tuxievous420 ah but the computer for it is $1200
@@jarfullofgravityany computer is up there. Best bet is Logic it has everything you need
@@tuxievous420 can you pls chill? I have other things that require more immediate financial attention this year. Never said I’m never going to upgrade. I just don’t have $1200 laying around for a hobby this weekend. Gotta have a little insight before you leap to gatekeeping.
@@jarfullofgravitylook it’s okay I understand but if you’re looking up a mixing tutorial then you want to dig deep: I’ve mixed down for artists on the radio. What I was saying is is if it’s a hobby then you might want to rethink it. Again, I am not coming at you sideways. All I’m saying is rethink your stead wgu if you are not all in
I actually have seen this guy in a previous izotope video a while back, i learned a whole lot. Thanks guy!!!
You’re welcome :)
perfect help! Thanks alot. I love you guys, your work is a blessing for many many people!
Thank you so much for the kind words 😇
You’re a wonderful instructor. Your videos are a pleasure to watch. Thx a lot.
this video is great, but way ahead for people who are not audio engineers. i barely understood anything you were talking about
How can I use Relay to unmask more than one vocal track stem?
So for me, one thing that stood out in this video was the POLARITY SWITCH!! , because I was manually tring to get the kick, in phase with the 808 by fading them and aligning just in that perfect point where a max number of 3 sines would overlap at the same poles. But switching them?! is piece I needed & I've just tried, while watching this video, and I can confirm you get different resonance on the 808, switched and distorsion applied. Would definitely try on layering drums with hats for a more acoustic ...blah blah blah you get what I mean. Thank you so much dude! The sleeping assistant there, got me unprepared hahaha^^
Already bought neutron 4 and the elements bundle.. this video is exactly what I needed
Very helpful tips but would it possible to have a video tutorial on mixing a dance or Edm tracks. Thanks.
Hi Geoff you are doing an amazing job with your tutorial videos. I've had an Izotope membership for a year and everything works great but there's one thing I can't get my head around. I use EZ Drummer grooves and also bass from the keyboard. Do you still have to do a low cut there? If I don't do the low cut everything sounds too boomy and if I do the low cut it sounds too thin and Ozone raises the bass range enormously in the mastering. Is it possible that the solution is not to make a low cut on the kick and keyboard bass and instead use the Unmasking tool in Neutron to reduce overlays? Thanks a lot for your great work!
Thanks a lot for your feedback! Our product support team will be happy to advise. Feel free to get in touch with us through this form here: bit.ly/izo_prod
I squeak on purpose when I play guitar. It sounds awesome.
That's one thing all these videos leave out. Don't make your mix so perfect that you cancel out the human element
True that
the food analogy is perfect! i started using it a few years ago to describe what i was doing to my family who didn't understand. Multitracks: like getting a bag of groceries and a menu to prepare a meal... one assumes that one knows certain skills like knife work, or what 'saute' means, and what order to do things in, in order to get the prefect meal on the table.
What an apt analogy 👏
Man, fantastically in-depth dive here! Subbed right away! thanks so much!👍🏼✨
This video has it all: I find back every single useful tip I gathered from other sources, and then some more. Thanks a lot: as a bedroom mix engineer, this is going to help a lot!
Glad you find the tips useful 😇
Great presentation and delivery on the topics. Thank You. Keep up the good work.
Canadians have got to be the most pleasant people on earth. Well maybe not the French Canadians but...
👌That was so useful.🔥Brought me back in time when I was still in uni learning how those techniques were frequently discovered by accident, like the parallel compression bus. For that matter vinyl scratching too (not important to this topic, but) those are all now an art form of their own, and we have to keep utilising them to make greater art with. 🤩 I'm saving this to take notes from, every time when setting up a mixing session. 🤘😁 Thank you Izotope team🙏
good job izotope.
idk why no otha audio companies upload or got semi decent content.
literally 0 of the companies that make audio gear that we use and buy , make tutorials and upload content.
WHAT A GREAT "MUST SEE" VIDEO!!!
Very good video, I use Reason for drums hence no phase or bleed issues 😀
great Video sir, Thank you so much for all the advices and tricks
You told everything about mixing what needs to know, this Video is superdupa. Again you did it. Thank you
Thank you for the feedback 😇
@iZotope, Inc. with your quality of presentation you can help a lot of companies with bad tutorial material... I think you know what about I am talking...
@iZotope, Inc. Posted this above but thought that might get lost so I've re posted here.... hope that's cool.
I'm a newbie to the PC DAW (been using stand alone recorders since the late 80's though) andci LOVED this video. Is there any chance to do a follow up using mostly DI? I live in a town house community and can't make noise. So I DI everything aside from vocals and acoustic guitar. I've heard others do this with FANTASTIC results. And maybe more does and don't's when recording mono or stereo. For example vocals. Mono up the middle or do a second take and pan hard left and right. Both sound the same in regards to being perceived as being at 12 o'clock.... or straight up the middle. I duplicate my rhythm guitars (play them separately to give that wide feeling) and pan around 5 o'clock and 7 o'clock.... to give room for other instruments. It still sounds like it's coming from the middle but I feel using the panning space just seems smart (even though the other instruments would be in a different frequency range, and probably not interfere with each other).... it just sounds really spacious to me. Any tips on mixing mostly DI would be a real help as I'm finding this a very steep learning curve.... cheers.
I'm a newbie to the PC DAW (been using stand alone recorders since the late 80's though) andci LOVED this video. Is there any chance to do a follow up using mostly DI? I live in a town house community and can't make noise. So I DI everything aside from vocals and acoustic guitar. I've heard others do this with FANTASTIC results. And maybe more does and don't's when recording mono or stereo. For example vocals. Mono up the middle or do a second take and pan hard left and right. Both sound the same in regards to being perceived as being at 12 o'clock.... or straight up the middle. I duplicate my rhythm guitars (play them separately to give that wide feeling) and pan around 5 o'clock and 7 o'clock.... to give room for other instruments. It still sounds like it's coming from the middle but I feel using the panning space just seems smart (even though the other instruments would be in a different frequency range, and probably not interfere with each other).... it just sounds really spacious to me. Any tips on mixing mostly DI would be a real help as I'm finding this a very steep learning curve....cheers.
the type of help i really need
Dude. Isotope rx is like $200. If we're at a stage that we need you, we probably don't have that kind of scratch to throw at a vst.
luckily most of these issues are irrelevant in a fully digital signal chain (no vocals, no mics, no analog instruments)
Bravo! Simple! Importand! Thank You
Is this in pdf? It’s so good! Just a one sheet would be great.
Fantastic thank you so much 🙌
I already know I will come back to this video once a week 😆 great work
Your light behind your right shoulder made me want a coconut! Mmmmmm, coconuts. D'oh! :D
Amazing clarity of thought!! Thanks for such videos!! One thing I wanted to point out as a budding Mix Engineer - Trusting your ears; and that has training your ears as a precursor. After, years of learning mixing (as a hobby for now to turn it into profession) it was just decision I had to make for myself- Trust my ears. I had to tell myself (after sufficient second guessing and self evaluation) that, if I understand music and sounds therein, I have a good sense of notes and rythm, there's no reason I should not trust my ears.
So as you asked, my tip for mixing is to 'make a good listening environment in your room, learn your room and your speakrs and trust your ears'. Then what you said will be totally valid- what sounds good, it IS good. 😊
A good example of this I found recently was having been a mix engineer for my personal projects first and foremost for years, I struggled to commit to a sound on my latest album and instead freaked out and hired a friend who's an accomplished mix engineer to help out.
In doing so I realized a lot of what I did I actually loved more than what he was offering initially, that allowed us to talk about it and helped me articulate what about what I was doing actually worked for me and I learned a lot about why I chose what I chose in the first place.
Might sound silly to "learn why you did what you did" when you should know why you're making decisions in the first place, but this may be a cool learning exercise if you have the time (and money unless you have some generous friends haha).
The exercise being, work on a mix very intentionally until you're happy with it, then bring it to one or 2 other mixers and see what they would do, and if there's anything you can glean from their decisions. For me the goal here wasn't to steal mix tricks or "steal their mix" to map onto my song, because EVERY SONG IS DIFFERENT, that will just never work. That's the single biggest thing I've learned in recent years and it's actually freeing. You don't have to be perfect every single time even tho there are some consistent rules.
This process taught me a few broader things to look into and keep an ear out for when starting a new mix, cause it's SO EASY to get stuck in the weeds. It's all about finding that balance between getting wayyyy too detail oriented and focused on meticulous process that "feels" like progress but is just distracting like spending 4 years on a snare sound, vs broad strokes and focusing on bigger picture things like how a snare interacts with the mix bus compressor and sits in relation to your guitar and vocal.
If you gota tweak something nerdy, do it quick, and then step back or better yet step away for 10 min and see how it all sits. If you produce your own music like I do, then it's impossible not to tweak sounds to some degree in the production phase before you even get to mixing. I'm still working on committing stuff in that step so that when mixing comes around I can focus on molding those sounds together instead of feeling like "this is mixing so now i have to CHANGE EVERYTHING BECAUSE MIXING". No.
Your gut chose these sounds because they felt good, now make them work together in the mix so that the audience gets the best representation of that inital feeling you had, and while this is art so there's no right or wrong technically, I think we're all chasing that initial moment of inspiriation that gets us excited when a song starts working. That's the feeling we want to share with our friends and fans. :)
insanely GOOD video.
thank U.
cause you are the man.!!
Here’s I leant a lot in this presentation🙏🙏🏿✨🎩
I sometimes shift the vocals slightly out of phase intentionally to drive it into the reverb realm for just one bar or even half especially in punk or hardcore that normally has one maybe two vocal tracks tops and the amount of instruments reflect the amount of tracks more often than not too so thickness at key moments is very handy and avoids printing effects. Old punks do these kind of things still in the studio believe it or not. Lol 👽✌️
I couldn't agree more. PRODUCTION (for me) is knowing what I want to hear. MIXING is more technical KNOWING HOW TO GET WHAT YOU WANT TO HEAR. I've worked in many studios, I'm not an engineer. with the computer at home I'm FAILING TO GET WHAT I WANT TO HEAR
My new album is produced / mixed and engineered using every plug it. Took me almost 3 months of trial and error to even find a balance. Ty so much for all yall work
these are such good videos! thank you
Great video, i have always used fruity delay 3 as a kind of stereo andd reverb widener. now i am experimenting with a convolver for enhanced reverb manipulation for recordings that have quite a bit of harsh resonances. just the right amount of reverb can preserve particular distorted sounds that you might want to keep in a mix without compromising the mix. last i decided to use the techinque of adding a compressor to the master bus, that advice is paramount for all kinds of audio engineers!
toontrack ez mix
The problem with people in learning anything us that they want to be constantly assured. Constantly given bread crumbs and have everything written on paper on what to do . Nobody wants to just dive in. If it isnt being explained to them like toddlers and having their hand held, they claim its too overwhelming. I'm self taught in many things, audio engineering, sports, instrumentations, and the list goes on. JUST FUCKING DO IT , OVER AND OVER AGAIN
Thanks. And for electronic music context, please.
lol Funny video title!
Like "How to run if you're not an Olympic Runner"
Shouldn't the title just be: "How to mix"
Hi.
What microphone are you using in your video?
Thank you.
Lewitt LCT 1040
@@ManchesterMusic Thank you!
After correctly explaining the difference between phase and polarity, why on earth do iZotope have a switch in their plugins labelled 'phase' which is a polarity switch? It's the same deal on consoles too, like the Roland MX-480.
quick question: Why don’t i feel any emotions from my own music? Is something wrong? is it because i’m mixing my own music?
With respect to the "dead air" segment, would you say there's any difference between clipping the audio clips, or would simply using a level/volume automation suffice?
13:53 - Balance Basics
I agree, mixing is the hardest thing in music production.
Eh, sound design is harder tbh.
Getting random people to spend time listening to it is even harder!
I don't usually think people should iron their T-shirts... but hey, this video is all about paying attention to detail, right?
He's going for that "wrinkled paper towel" look. Very in this season.
thank u, I learned so many things in this vid !!
..amazing tutorial..respect
Great!
STEP ONE: DONT
Genius
I will make this quick. Izotope and sonible. Through in some automation and learn how to group tracks.
I'm using an online software to do the mixing but there is some limitation in the app itself. It is my first project and I'd like to know is that possible for me to download all tracks as a single wav. file and export to Izoptope to continue my mixing. Is that a good idea as my song haven't remove plosives and noise for the vocal but I already do compression, reverb, effects and the balancing for all other instrumental tracks.
Everything mentioned in the first 40sec it's the producer's job. When you sit down to mix that's all you going to do...mix. Fixing tuning,phase or timing that's not the job for the mixing engineer. If you have to fix a problem that could be avoided on the producing or recording stage... Then you producing not mixing.
Incredibly insightful video as usual from one of the best instructors - with, I might add, one of the most calming voices.
Best compliment ever. Thank you! 😄
🇿🇦🔌
This video helped answer so many questions; thank you! Most of the content on the web never really talks about the lead-up to the mix. They just magically have perfect-sounding audio tracks to start with. There are a lot of processing steps that need to happen first. I still have many questions, but this video helped point me in the right direction. 🙂
But for example off pitched bass could be a wanted effect right?
30 minute Izotope product shilling session. I know this is a company YT page but holy crap
Hey I'm not a mixer I'm a blender! I only do smoothies dude!
That thumbnail graph is so stupid, like, it could have easily made sense, and you actively chose to make it not make sense smh😑
Great video!! Thank you for sharing🙏🙏
DON'T
great content great quality audio but iron your damn jumper :)
Congratulations!! Youre a mixing engineer now (Jk)
Focus your time on writing good songs and find a great vocalist, or get singing lessons, the 2 biggest issues I see with amature music
I just run my mix through Ozone 10 Advance. It generally gets me in the ball park where I need to be and then I just fine tune.
Excuse me. Do you have results posted anywhere
what’s the song at step 10?!?! good lord its so good
Guitars should always be double tracked faded lard left and hard right
what r good ingredients ?...u can make roman taste good
I love and agree with that first statement. "Mixing is hard".
What is the difference between Mix bus and Master bus?
Man u a genius. Thank u! Literally hit all the details!
Great ads
Thank you. Some times my timing is off, and mixers have fixed them--- kudos to engineers.
not happening good beginner means not good everything .
bravo....great video