Thanks Brother 🙏🏼✅👍🏼. I Scrapped for about 9 Months in 2017 and Now I’ve Been Going Hard since the Very Beginning of this Channel. Roughly 2.5 Years Now 🤔🛠️♻️👍🏼
Mission Accomplished, you did a great job. Migraines are no bueno at all, glad you're feeling better. Another great video in the books J & G. #EverythingMustGo 👍🏽😎👍🏽
Hello Buddy,, Sweden again and still scrapping. That was an Awsome job with the AC... I get them regurlary but it's the smaller ones. It's a good thing to listen to your body or it gets rebellious. Stay safe and take care.
@@JunkNGrind those things are awsome scrap value with next to nothing in waste or trash, fan blade and a bit of insulation on the compressor. My body got rebellious with me and that was no good, about 10 years ago and I am still not back my Old self. These days I do pay attention when it tells me to slow down.
“This parking lot will be empty when I’m done!” He thought you were there only for the goodies, heck no, everything must go ! Congratulations on two years, I mean that! You really lit up that scrap yard with lights 😀😀😀😳😳😳😀 Black electrical tape on your finger, the scrappers Band-Aid! 😳 I really think engineers sit around and think “where can I possibly add 1000 more screws? “. Sounds like you got a mild case of heat exhaustion …that’s one step below heat stroke, I got the exhaustions once b4, very similar, all the energy drained out of me, scary😳😳 Still “flying “ around Maryland😀 Thanks for the “Rad” shoutout 😀😀 Ur the Rick Ross of scrapping, every day ur hustling! Sheesh! Have a great one, my man, Steve.
Haha. Thank You Sir 👏🏼👏🏼👏🏼. They Do Bro, Engineers Have Meetings on Adding a Few Thousand Extra 5/16s in All HVAC Systems 🤔😂. Flying Everywhere Brother 👍🏼♻️💪🏼
I’ve Used Diablo Blades in the Past Buddy. I have a Few Somewhere Put Up. I wasn’t Sure Which is Better I’ve Heard Both. 🤔 TY for Watching 🙏🏼🙏🏼🙏🏼. I have a Few Grinders as Well
Thank You Sir 👍🏼. I Have a Cordless Milwaukee Grinder & 2 Dewalt Grinders. I Don’t Trust Harbor Freight Power Tools Personally but If It Works It Works 🤔✅
What’s Up Buddy 👍🏼. TY for Watching Bro. I See HVAC Guys Pull in the Nonferrous Section with Whole Trailers Full of Radiators and Copper Mannnnnn 🤔♻️🤑👀
great video, love your work ethic. what do you do with light ballasts? there was like 100 of them on someones curb i picked up last night, do they go to the steel pile or do they go to the nonferrous at the scrapyard?
Last Time I had Almost a Full Load and I Cut All the Wires & Ballast Out 🛠️. I Took Everything to Nonferrous and I Remember They Were Not Worth Much Money for Ballasts. TY Sir. 🙏🏼✅👏🏼
The hardest worker in the game he does just about anything by himself
💪🏼❤️. Trying Cuzzo 🛠️
scrappin ain't for quitters, great hustle my brother!
Thanks Brother 🙏🏼✅👍🏼. I Scrapped for about 9 Months in 2017 and Now I’ve Been Going Hard since the Very Beginning of this Channel. Roughly 2.5 Years Now 🤔🛠️♻️👍🏼
Mission Accomplished, you did a great job. Migraines are no bueno at all, glad you're feeling better. Another great video in the books J & G. #EverythingMustGo 👍🏽😎👍🏽
Yeah Brother. Mission Accomplished 🛻🗑️♻️. “M-Words” Ruin My Whole Mojo for the Day Usually. They are Terrible 🤔🙄. Thank You Sir 🙏🏼
Hi J & G, You are so amazing 😊!! You go the extra mile, to obtain your scrap. Terrific 😊!! So much work. EVERYTHING MUST GO ❤!!!!!
Yes Ma’am 🙏🏼😁. Everything 👏🏼
Baltimore's hardest working Scrap Pirate ARRRG!! Grinding for some sweet payouts at the yard! Great vid brother
TY Very Much Buddy. 🙏🏼✅ Arrrrgh 😁🤙🏼
Hello Buddy,, Sweden again and still scrapping.
That was an Awsome job with the AC... I get them regurlary but it's the smaller ones.
It's a good thing to listen to your body or it gets rebellious.
Stay safe and take care.
Hello Sweden 👍🏼✅👏🏼. Those are Definitely My Largest Units Ever Scrapping Man. I was Excited to Get Started Up There 🛻🗑️♻️🤑. Rebellious for Sure Buddy
@@JunkNGrind those things are awsome scrap value with next to nothing in waste or trash, fan blade and a bit of insulation on the compressor.
My body got rebellious with me and that was no good, about 10 years ago and I am still not back my Old self.
These days I do pay attention when it tells me to slow down.
@pederlindstrom3132 Yeah Man I Know What You Mean. Definitely Have Some Aches and Pains in My Joints 🤔😁
That’s nice They let you take your time and do that in the parking lot.
Yessir. I was Surprised He gave me a Few Days to Remove Them Man 👍🏼✅🛠️ TY for Watching 🙏🏼
Get you a head mount for camera. work with both hands
Thanks for Watching Buddy. I have a Head Mount and a Tripod ✅👍🏼. Appreciate It Sir
Congratulations on your new subscribers! Great job as always!
Thank You Very Much 🙏🏼👍🏼. Appreciated Ma’am ✅😁
Job well done that man will definitely call you back 👍, need to take it easy when the ol'bones tell you too keep grinding.
Yessir 👏🏼🤑♻️. What’s a Vacation Man 🤔😁. I Need Some Beach Time Somehow Bro. Thank You Brother. THE COMPRESSORS WERE 1150 LBS NOT 1400+ EVERYBODY 👀.
GOOD JOB !!!
Thank You Very Much 🙏🏼🙏🏼
Super great video. Man those AC units were massive. Can’t wait to see what the compressors weight out at. That was a lot of work.
Thank You Sir ✅🙏🏼. I Put 1400+ Pounds in the Video but That’s Wrong. It was Around 1200 Lbs Total. 750 Lbs & 450 Lbs 😳🤔
@@JunkNGrind well that is still a great weight
@scrapnjunk81 Agreed 👍🏼
Thats hustlin right there my man good stuff
#Hustling 🛠️😁. Thank You Sir ✅👍🏼
You got it all Grinding !!
It was A lot of Work Buddy 🛠️👍🏼. Appreciate You Sir 🙏🏼
Nice work my friend :-)
Appreciate You Sir ✅👍🏼
For the big job rent a trailer it save time and you will be able to mack money fast
My Truck has a LiftGate on There. Had to Remove the Hitch Setup to Install It Buddy. Thank You for Watching Sir 🙏🏼✅
You work hard and log hrs, I hope they give you some $$$ and not to have to rely on just the value of the metal 😊😊
I Do A lot of Free Scrap and Appliance Removal But I Charge for Further Distances Over About 12 Minutes Driving Time 🛻♻️🛠️✅. TY for Watching 🙏🏼
“This parking lot will be empty when I’m done!”
He thought you were there only for the goodies, heck no, everything must go !
Congratulations on two years, I mean that!
You really lit up that scrap yard with lights 😀😀😀😳😳😳😀
Black electrical tape on your finger, the scrappers Band-Aid! 😳
I really think engineers sit around and think “where can I possibly add 1000 more screws? “.
Sounds like you got a mild case of heat exhaustion …that’s one step below heat stroke, I got the exhaustions once b4, very similar, all the energy drained out of me, scary😳😳
Still “flying “ around Maryland😀
Thanks for the “Rad” shoutout 😀😀
Ur the Rick Ross of scrapping, every day ur hustling!
Sheesh!
Have a great one, my man,
Steve.
Haha. Thank You Sir 👏🏼👏🏼👏🏼. They Do Bro, Engineers Have Meetings on Adding a Few Thousand Extra 5/16s in All HVAC Systems 🤔😂. Flying Everywhere Brother 👍🏼♻️💪🏼
For your saw all try Deablo blades they last much longer also metal blades on an angle grinder!👍😎🇺🇸
I’ve Used Diablo Blades in the Past Buddy. I have a Few Somewhere Put Up. I wasn’t Sure Which is Better I’ve Heard Both. 🤔 TY for Watching 🙏🏼🙏🏼🙏🏼. I have a Few Grinders as Well
Process them motors later. get that copper
I Took the Motors in Whole to the Nonferrous Section 👍🏼. I was Thinking That Afterwards Actually 🤔. TY for Watching Sir
Great Video. you could do with a trailer!!
Thank You for Watching 👍🏼✅. I Don’t Have a Trailer Hitch. I have a LiftGate Setup.
Would be good to see how much copper was in one motor. Drinking enough water--be safe. 😊
I Turned the Motors in Whole. There was 6 Pretty Heavy Motors on the Fans. I Appreciate You Ma’am ✅🙏🏼 TY
Did someone just come and take a rest of them or did the company clean them out?
I Took All of The Units. It Took Me 4 Days to Break Them All Down. TY for Watching 🙏🏼✅👍🏼
A small generator and a small grinder from harbour freight could help ya , good haul junk @ grind
Thank You Sir 👍🏼. I Have a Cordless Milwaukee Grinder & 2 Dewalt Grinders. I Don’t Trust Harbor Freight Power Tools Personally but If It Works It Works 🤔✅
you would nut if you saw some of the units i have taken apart working in the hvac industry, 450 lbs of coil per unit
What’s Up Buddy 👍🏼. TY for Watching Bro. I See HVAC Guys Pull in the Nonferrous Section with Whole Trailers Full of Radiators and Copper Mannnnnn 🤔♻️🤑👀
Good job man
Don't forget you owe me some money 😂
I Got You Bro 😎✅. Appreciate You Sir 🤙🏼
If you take the sawzall and cut the radiators in half it would be a whole lot quicker and they weigh a whole lot more..
I Cut Every Single Piece of “Macaroni” Copper Off of Every Single AC Unit Up There Buddy 😁♻️. Took Forever Sir. TY 👍🏼
great video, love your work ethic. what do you do with light ballasts? there was like 100 of them on someones curb i picked up last night, do they go to the steel pile or do they go to the nonferrous at the scrapyard?
Last Time I had Almost a Full Load and I Cut All the Wires & Ballast Out 🛠️. I Took Everything to Nonferrous and I Remember They Were Not Worth Much Money for Ballasts. TY Sir. 🙏🏼✅👏🏼
💰💰💰💰💰💰💰💰💰
🛻🗑️♻️🤑
❤❤❤
Need to drink lots nd defo need to were a hat in that heat
TY Very Much Buddy 🙏🏼🛻🛠️
Quit talkin and get to work. 2 days at most all day.
Thanks for Watching. 🙏🏼👏🏼 Definitely Take More Than 3 Days Buddy. The Scrapyard is 40 Minutes Away and Closes at 3:30. Lots of Talking 😁
You need to look in the mirror while you're filming.Cause you got black stuff all over your face getting it in as usual
ExtraHellaDirtFace 😁👏🏼🛠️