How many revoloutions a minute are the tines and auger running at? That fendt is awesome! Im sure that JF harvester couldnt go any faster! Some of the other trailed harvesters when u see them cutting, the blades and tines and the roller look really slow but suppose it depends on whats pulling it. Nice sound. Im fascinated with the speed of the components. Love to see close up vid of that harvester to see how fast the blades run at full steam. Excellent video by the way
Suprises on the output of that trailed, filling the trailers well too thanks to that spout. Hell of a noise from it....is that just the gearbox and chopping drum etc
AgriVidsProductions All Jf's sound like that, its the fact they use a choppingdrum, same as the self propelled machines, the Pottinger and lely/Mengeles have Flywheels and are far quieter in operation, thats someweapon up front, is that a operational set up or a demo of some sort? Never thought I would see so much power in front of a trailed harvester.
Why is he filling the trailers on the wrong side? Is it just he prefers that way or?? I heard it is hard on the gears and spout to fill on that side but as a baling contractor and part time silage carter I do not no much about trailed machines soo... Brilliant video!
you can not beat the sound off a forager you can here them miles away, its the sound of spring, Great video thanks
Unreal video, you rarely see such a big trailed harvester and tractor .
Thanks, and that is true
Just great. this is the better to watch than the self propelled. Thanks for sharing.
dih
Best forage harvesting vid I have seen in a long time.
Great Video, Brilliant pairing of machines, thanks for sharing
Even the sound brings back memories. So good, some bad and some bloody terrible.
How many revoloutions a minute are the tines and auger running at? That fendt is awesome! Im sure that JF harvester couldnt go any faster! Some of the other trailed harvesters when u see them cutting, the blades and tines and the roller look really slow but suppose it depends on whats pulling it. Nice sound. Im fascinated with the speed of the components. Love to see close up vid of that harvester to see how fast the blades run at full steam. Excellent video by the way
How many acres in a day will this lift?
Absolutely fantastic!!!! Many thanks for sharing, cracking bits of machinery on show here.
Thanks Owen, That Fendt is to die for!
@@AgriVidsProductions thankyou for not responding to my comment
@@scallylad5037 at the time you commented. I was on a complete break from youtube. So I didn't answer a lot of people comments.
That fendt puts the case and the John Deere tractors back in their place!! ;p
As an aside, that Teagle Titan will be 20+ years old if it’s a day. Probably a pretty good investment over its lifetime.
Very nice. That Fendt is a bit of a beast!!
Double or precision chop??
Suprises on the output of that trailed, filling the trailers well too thanks to that spout. Hell of a noise from it....is that just the gearbox and chopping drum etc
Yeah the height of the spout is good. Horrible noise from it, yeah all of it was making a noise.
AgriVidsProductions All Jf's sound like that, its the fact they use a choppingdrum, same as the self propelled machines, the Pottinger and lely/Mengeles have Flywheels and are far quieter in operation, thats someweapon up front, is that a operational set up or a demo of some sort? Never thought I would see so much power in front of a trailed harvester.
Is that flywheel type where they have the blades on the flywheel and it acts as the accelerator too?
Hywel Phillips fly wheel turns perpendicular to the feedrollers, drums run inline with the feedrollers.
The fendt makes that case 380 look small
What john deere is that ?
6630 i believe
Great video ! Quite a dry crop there. Gotta say the fendt does look smart in black
Thanks, it wasn't dry i can assure you of that. And it does :)
Does it have as much capacity as a smaller self propeld
I would say so
Some chopper! Struggling on some lumps sometimes
Great vid keep it u and we're was this at
Better than self propelled because they just look nice
Where was this taken? Heavy looking crop
Durston & Boat & Anchor Somerset, it was a heavy crop
Are we looking at the future or a throw back to the past
Why is he filling the trailers on the wrong side? Is it just he prefers that way or?? I heard it is hard on the gears and spout to fill on that side but as a baling contractor and part time silage carter I do not no much about trailed machines soo... Brilliant video!
How can he fill from the other side with the pickup on the right ? ......
***** Most people fill from the other side you know...
Kelly Contracts People have different sides to which they fill up from, but i personally believe this is the best way
But he physically can't fill from the other side a the offset of the harvester is to the right...
i agree that he is on the wrong side of the harvester totally .
how fast can you go with that setup ? km/h ?
24ft probably about 8mph with 350hp at shatf
Stoll must have +300KM? :D
looks like a good goin on but seems a big tractor to have on the forager
You need that big of tractor to run it mate
I'd say a perfect match, you can sometimes hear the forager dragging the fendt down aswell!
Nice one, good sound. black fendt nice
Cracking video bud and some nice kit aswell
Thanks Martin, It certainly is
That fendt puts the case and john Deere tractors in their place!!! ;p
is that HAY or Actually Silage........
Great video! That Fendt is some size of a tractor!
thanks peter, oh shes a monster
What hp
Found 350 at the shaft,
Great video Aaron
sounds od spring ! :P
MORE SPEED! push it to work a little bit
Gustav Andersson I
great video
Thanks Tm
MEGA TOP! 😄
Nice 5/5
Thanks :)
If only all roads were on stilts hey
जी
बी क्ष 😎।
Aan
Ss
eidjf