REALME 9I 5G CHARGING BOARD REPLACEMENT | HOW TO CHANGE REALME 9I 5G CHARGING BOARD

To replace the charging board on a Realme 9i 5G, follow these steps:
1. *Prepare Your Tools and Workspace:*
You'll need a small Phillips screwdriver, plastic prying tools, tweezers, and a suction cup.
Ensure you work on a clean, static-free surface.
2. *Remove the Back Cover:*
Power off your Realme 9i 5G.
Use a hairdryer or heat gun to warm the edges of the back cover to soften the adhesive.
Apply a suction cup near the bottom edge and gently lift while inserting a plastic prying tool between the back cover and the frame. Carefully slide the tool around the edges to release the adhesive.
3. *Detach the Battery Connector:*
Once the back cover is removed, locate and unscrew the screws securing the mid-frame.
Remove the mid-frame and disconnect the battery connector using a plastic tool to avoid any short circuits.
4. *Remove the Charging Board:*
Locate the charging board at the bottom of the device.
Disconnect any flex cables attached to the charging board.
Unscrew and gently lift the charging board out of its slot.
5. *Install the New Charging Board:*
Place the new charging board into the slot and secure it with screws.
Reconnect the flex cables to the new charging board.
6. *Reassemble the Phone:*
Reconnect the battery connector.
Reattach the mid-frame and secure it with screws.
Carefully reapply the back cover, ensuring it clicks into place. You may need to reheat the edges to soften the adhesive for a secure fit.
7. *Test the Device:*
Power on your Realme 9i 5G and test the charging functionality to ensure the new board is working correctly.
For detailed steps with visual guidance, consider looking at online tutorials or guides, such as those available on hello Phones RUclips channel

[@tanujsingh9577]

Bhaiya charging pin ka name bta dijiye 😢n
Mai bahut jagah gya waha set nhi ho rha hai