Go and do that! I did it myself and it’s a lot of fun! But don’t get too excited at first, you will have to learn working with leather! It’s not easy, but definitely doable, especially if you watched a lot of videos from corter!😉
Same here! I was looking up places that sells scrap leather. I also watched the video on using "non-leather work specific" tools, so Im really tempted to try it out!
Eric, it may be worth grabbing some blank cards on Amazon. That way you can show off the pockets without having to use anything with personal information on it.
Where can I order leather that thin? The links to Weaver ultimately lead to 2 to 3 oz leather but the leather in the video looks thinner than that. Thanks for all the videos!
I bought the pdf pattern of this one and found the print accuracy test to be almost 1/8" too short. I tried both the "fit to page" and "actual size" printing options and neither made it better. Any suggestions? Should I just go with it?
@@laurenp7081 I just went with it and it worked out fine. Although, using the 5mm stitching chisels from weaver as he does, I had a hard time getting the spacing to work out nicely. I don’t know if that’s a result of the pattern or not but I’d probably recommend using a smaller stitching chisel anyway. Good luck ✌️
@@AirSofter241 I knew I could trust RUclips comments! I just bought this pattern and was wondering the same. Thank you for the confirmation, I will start this project this weekend!
Is there a trick to lining the flesh side with leather? When I do this I get wrinkles on the inside piece - maybe I am using the wrong type for lining?
Its a little confusing on the weaver web site as the bridle is only available in 10-12 oz and they say you lined this wallet with split to 3 oz. But it all looks thinner than that. Could you please confirm what leather you use for the tan and the dark outer pieces and its weight please. I assume the one you made in the video is all bridle or is the bridle just the outer darker layer?
I just bought your pattern because I really like the design. One thing though is unclear to me: usually the exterior shell has to be slightly larger/wider on a wallet, so that the interior doesn't wrinkle in the middle when the wallet is folded? Why is that not necessary here? Is it skived down in the middle? Thanks!
Definitely using weldwood, I get it at walmart. You can get thinners for barge though if you need it. I found using a glue spreader (silicone spreader, small putty knife, popsicle stick, ect) is waaaaay easier to control. Those damn weldwood brushes pop off the lid too easy.
This is SO relaxing..real man cave stuff! Really takes you away from the world at large. Love it!
A wallet that holds cash?! What a mad lad.
These are days where that can't be taken for granted lol.
Watching both the skiving and freehand knife work is mesmerizing. Great talent.
Здравствуйте, всегда с удовольствием смотрю ваши видео. Спасибо что не бросаете выкладывать видеоролики.👍
After watching a few of these, I want to go get some leather and give this a shot myself. Nice stuff!
Go and do that! I did it myself and it’s a lot of fun! But don’t get too excited at first, you will have to learn working with leather! It’s not easy, but definitely doable, especially if you watched a lot of videos from corter!😉
Same here! I was looking up places that sells scrap leather. I also watched the video on using "non-leather work specific" tools, so Im really tempted to try it out!
This might be my very favorite
I love the old ways of crafting during high school learned,all leather ,tooling,stiching,burning ,enjoyed,.So very nice to see!🐾♥️🐾♥️🐾♥️☘☘
Very nice, thanks for always sharing...
Beautiful job guys.You were like a Scalpel Ninja cutting that pattern out 😆 Really like the look of the two tones.
What a great project! I will be getting the pattern and trying this one out for sure.
Anybody else just watches knowing you’re not gonna even make one, but still watch because it’s relaxing.
Cool design. Simple and elegant. 🙏🏻
Another great video. You're really an inspiration
WoW I like this because it's small and Compact also not to Thick .I love the colour to :)
That there is an instant buy. Needs it.
Yes l am on time today. My needle is poised, lets go! 😃
That’s a sharp knife
At 4:07 why did you not scuff and glue the pocket when you stitched it? just curious if there was a reason.
OOOOo another one for the books!
Good job!! Saludos desde Yucatan, Mexico.
Beautiful
very nice , from Bangladesh
Eric, it may be worth grabbing some blank cards on Amazon. That way you can show off the pockets without having to use anything with personal information on it.
I did not even think to do so. God bless you from Russia!)))
(translate.google)
If I’m using the same thickness leather all around, what thickness of leather should I go for in order to keep the wallet slim?
1-1.5mm would be fine. If you're using veg tan 1mm will do.
Nice work! Again😉
Am your FAN from CAMBODIA, I love your Wallet making. Can you made Wallet look like Heart.,..,..
I really like animal shaped stuff so a heart wallet video could be useful because is a organic shape too
Wonderful as always! What weight leather did you use for this?
3oz :)
Where can I order leather that thin? The links to Weaver ultimately lead to 2 to 3 oz leather but the leather in the video looks thinner than that. Thanks for all the videos!
They're using 3 oz.
Would this qualify as a good beginner project? Seems like it
Nice one. No edge polishing?
I bought the pdf pattern of this one and found the print accuracy test to be almost 1/8" too short. I tried both the "fit to page" and "actual size" printing options and neither made it better. Any suggestions? Should I just go with it?
I noticed that too, and I'm going with it as we speak. How did the wallet work out for you?
@@laurenp7081 I just went with it and it worked out fine. Although, using the 5mm stitching chisels from weaver as he does, I had a hard time getting the spacing to work out nicely. I don’t know if that’s a result of the pattern or not but I’d probably recommend using a smaller stitching chisel anyway. Good luck ✌️
@@AirSofter241 I knew I could trust RUclips comments! I just bought this pattern and was wondering the same. Thank you for the confirmation, I will start this project this weekend!
Is there a trick to lining the flesh side with leather? When I do this I get wrinkles on the inside piece - maybe I am using the wrong type for lining?
I love to collect slim wallet
Its a little confusing on the weaver web site as the bridle is only available in 10-12 oz and they say you lined this wallet with split to 3 oz. But it all looks thinner than that. Could you please confirm what leather you use for the tan and the dark outer pieces and its weight please. I assume the one you made in the video is all bridle or is the bridle just the outer darker layer?
It's all 3oz, Weaver will split the 10-12oz hides down for you for a small fee :)
where did you by your glue
I just bought your pattern because I really like the design. One thing though is unclear to me: usually the exterior shell has to be slightly larger/wider on a wallet, so that the interior doesn't wrinkle in the middle when the wallet is folded? Why is that not necessary here? Is it skived down in the middle? Thanks!
What is the type of stitch used for the card pockets @4:10 ?
It's called Saddle Stitch.
@@karlalbiston429 i thought it looked diffrent, like a "regular stitch" but thanks
@@akuiori They're just ridiculously good at a one handed saddle stitch lol
Very nice 🤗
Hello! Is there a tutorial on how to hand stitch? Please let me know. Thanks
I found it. Thanks!
Hy nice video
what type of thread do you use?
Are you thinning your barge cement or something? I use the exact same kind and it's a pain in the ass to work with cleanly.
It looks like the consistency of the weldwood cement that you can pick up from home Depot or Walmart.
Definitely using weldwood, I get it at walmart. You can get thinners for barge though if you need it. I found using a glue spreader (silicone spreader, small putty knife, popsicle stick, ect) is waaaaay easier to control. Those damn weldwood brushes pop off the lid too easy.
That leather y'all use is THICC
@Corter Leather I want a pattern for this!!!
Thanks brother. I missed that. Purchased
hello, how thick is the leather?
Need this thin wallet as an iPhone cover
What's that thing that looks like a chisel?
What is the thread thickness?
super!!!!!
Got new blades for the Exacto knife; let's jam.
Haha! Just received some new blades in the mail as well:-)
Nice
can you also make leather hat?
How can I buy this wallet?
bro try to make the LV pocket organizer, i will order.
I have a design like this!
Hello Corter leather, I’m looking for a good contact for email submissions//business inquiries. Kindly assist.
shouldn't you bend it at the end?
Ever tried making a belt?
good
Please Pdf link 🖇️
So...do you want my address? So you can send it to me!? Looks awesome!
that may or may not resemble another brand with 2 certain letters 👀
💲
روعة
Like!
You make free handing a template and skiving look way too easy.
👍🏻
Cash? What's that? 😂
Want
"Cash"? Nobody ever has coins?
lol coins aren't that big in the US. When we get them as change, we just throw them in a jar instead of spending.
Can u send in India 🇮🇳
что то фиговый кошелек
The volatile sushi epidemiologically snatch because gold considerably hammer until a lean crate. damp, discreet beaver
Кривой шов, слишком толстая нить. Хрень короче
What kind of thread do you use?