Allen Bradley VFD Powerflex 4M- 3 Wire Control Operation
HTML-код
- Опубликовано: 21 сен 2024
- Allen Bradley VFD Powerflex 4M- 3 Wire Control Operation
✅ Use the coupon code🔥RUclips 🔥to get 20% discount on the course Allen Bradley Module- PLC, VFD and SCADA available at codeandcompile...
For daily/weekly updates follow us:
📸 Instagram: / codencompile
👩💻 Online School: www.codeandcom...
📑 Wiki: wiki.codeandco...
🌍 LinkedIn: / code-and-compile
Cheers,
Rajvir Singh
Thank you, Mr.Singh! I like your videos,one of the best educational videos on industrial automation. Delta PLC videos are great! Greetings from Russia! Спасибо!
Hi Smith, Thanks for the appreciation :) I'm glad that it serves you!
Greetings from NFI, India
Mr Singn. You are the best. Congratulations, from Brazil.
thank you so much this made a lot more sense then when I learned about it at school. It's greatly appreciated for your help. Many thanks.
Hello Andrew Regalado - Your welcome! ;) get some free/paid courses at online.nfiautomation.org
The diagram is wrong, is sourcing mode you connect 11 to 1 directly in your diagram you show that you connect 11 to switches.
Thank you Mr. Singh. If ill just use an ordinary NO push button switch for NO(R2) how will it run continuously?
By using 3 Wire control, you can make it run continuously.
Mr Singh thank you for posting this video would the same method apply for the powerflex 40
good morning sir this is Himanshu from burq energy Ghaziabad. please upload vedio digital input parameters settings
thnx a lot sir how can i learn more about plc and drives
Dushyant Dhiman To learn more about PLC and Drives please check this course: online.nfiautomation.org/catalog/1769?couponCode=LEARNING_MADE_EASY
Dushyant Dhiman To learn more about PLC and Drives please check this course: online.nfiautomation.org/catalog/1769?couponCode=LEARNING_MADE_EASY
+Rajvir Singh (NFI Automation)
Hey Raj. Great vids!!.
Is it some how possible to use the 0-10v in to control the enable AND the speed reference? Maybe utilizing the relay and digital IO's in combination. I have a powerflex 40 110ac single phase to 220v three phase and am trying to get away with using a extra pins from my digital controller just to enable. Right now I just push keypad to start and use remote voltage ref to control speed. It would be great if I could trick the drive into saying "if voltage from source is below xV then disable OR if voltage is above xV enable. I think it is possible,but I just can't see it as I'm so new to these drives.
Thanks for any input. Again, Great videos.
+J Santarsiero I guess it's possible. You can use the feedback terminal of your drive to enable the contact when the input freq/voltage is above say 5Hz/1 Volt. Use that contact to enable (RUN) the VFD. But im not sure. This feature depends on drive to drive. Please check the manual for the same.
+Rajvir Singh (NFI Automation) I'll look into this. Thank you.
Hello Rajvir, thank you for your video, can I wire the drive using a micro switch on the motor just to make it turn one cycle and make it stop once completed, and of course im using a plc to control the drive start cycle, hope to hear from you, thanks in advanced!
Hello Ernesto, i did not understand your question, can you please write to me at nfiautomation@gmail.com to brief your query.
Rajvir Singh, thank you so much for your response, I already figured the wiring and input the correct parameters on the drive, now it works li a charm, thank you very much, greetings!
Alright, that's great! Happy to hear that. Cheers !
Greetings from Germany!
Rajvir Singh greetings from the U.S.A!! I'll reply to your mail and show you what we did, Thank you!!
Alright great ;))
Hou to fault clear video please
Power flex m4 vfd
Sir Mitsubishi ke sath vfd and plc ka communication batayena sir in Hindi me