2000 फुट तक खुदाई की मशीन REVERSE ROTTERY DRILLING PROCEDURE FOR 2K FEET DEPTH TUBEWELL

Поделиться
HTML-код
  • Опубликовано: 11 ноя 2021
  • 9812731330 Chandi Mistry
    #reverse_rottery_drilling_2000feet_tubewell
    Reverse circulation rotary drilling is a variant of the mud rotary method, in which drilling fluid flows from the mud pit down the borehole outside the drill rods and passes upward through the bit. Cuttings are carried into the drill rods and discharged back into the mud pit.REVERSE ROTTERY DRILLING MACHINE FOR TUBEWELL 2000 FEET DEPTH FULL DETAILED REVIEW & SPECIFICATIONS
    Reverse circulation drilling was developed to allow for larger borehole drilling without limiting the factors of drilling fluid pump capacities. Rotary rigs designed for reverse circulation have larger-capacity mud pumps and air compressors to allow for increased pressures that are needed to ensure the removal of cuttings from large boreholes. These drill rigs are far larger than those used for domestic purposes.
    Centrifugal mud pumps often are used instead of displacement because the cuttings will more easily circulate through a centrifugal-type pump than through a positive displacement pump.
    Reverse circulation rotary drilling is a variant of the mud rotary method, in which drilling fluid flows from the mud pit down the borehole outside the drill rods and passes upward through the bit. Cuttings are carried into the drill rods and discharged back into the mud pit.
    Reverse circulation requires a lot of water and sediment-handling, as the boreholes are large in diameter. Stability of the borehole depends on the positive pressure from the fluid in the borehole annulus. If the positive pressure is not sufficient, the borehole wall or parts of it might collapse, trapping the drill string.
    For reverse circulation rotary drilling, the drilling fluid can best be described as muddy water rather than drilling fluid; drilling fluid additives seldom are mixed with the water to make a viscous fluid. Suspended clay and silt that re-circulates with the fluid mostly are fine materials picked up from the formations as drilling proceeds. Occasionally, low concentrations of a polymeric drilling fluid additive are used to reduce friction, swelling of water-sensitive clays, and water loss. Because fewer drilling muds are used, no wall cake is created, and the stabilization by the borehole fluid is needed.
    To prevent caving of the hole, the fluid level must be kept at ground level at all times - even when drilling is suspended temporarily - to prevent a loss of hydrostatic pressure in the borehole. The hydrostatic pressure of the water column, plus the velocity head of the downward moving water outside the drill pipe are what support the borehole wall. Erosion of the wall usually is not a problem because velocity in the annular space is low.
    A considerable quantity of makeup water usually is required and must be immediately available at all times when drilling in permeable sand and gravel. Under these conditions, water loss can suddenly increase, and, if this causes the fluid level in the hole to drop significantly below the ground surface, caving usually is the result. Water loss can be addressed by the addition of clay additives, but this action is only taken as a last resort.
    O
    Reverse mud is a cost-effective method for drilling borehole 24-inches and greater, and is most successful in unconsolidated formations.
    ND
    Advantages of Reverse Circulation Mud Rotary
    The near-well area of the borehole is relatively undisturbed and uncontaminated with drilling additives, and the porosity and permeability of the formation remains close to its original hydrogeologic condition.
    Large-diameter holes can be drilled quickly and economically.
    No casing is required during the drilling operation.
    Most geologic formations can be drilled, with the exceptions being igneous and metamorphic rocks.
    Little opportunity exists for washouts in the borehole, because of the low velocity of the drilling fluid.
    Limitations of Reverse Circulation Mud Rotary
    Large water supply generally is needed.
    Reverse-rotary rigs and components are large and expensive.
    Large mud pits are required.
    Some drill sites are inaccessible because of the rig size.
    For efficient operation, more personnel generally are required than for other drilling methods.tractor repaire
    tractor modified
    modified tractor
    tractor agency
    tractor advertise
    tractor advertisement
    how to repair tractor
    tractor gear box
    how to open gear box
    tractor pump
    tractor pump repaire
    how to set tractor pump
    tractor oil pump
    set pump
    how to increase tractor power
    tractor power
    improve tractor power
    tractor harrow competition
    harrow competition
    tawi competition
    tavi competition
    how to drive tractor
    HOW TO REPAIR JCB GEAR BOX
    HOW TO CHANGE JCB CLUTCH PLATE
    HOW TO OPEN JCB GEAR BOX
    GEAR BOX
    JCB GEAR BOX
    REPAIR JCB
    JCB
    JCB REPAIR
    ESCORT JCB
    tractor service
    tractor tyer
  • Авто/МотоАвто/Мото

Комментарии • 99