How to Replace Spark Plugs 2010-17 Chevrolet Equinox

Поделиться
HTML-код
  • Опубликовано: 16 окт 2024
  • Buy Now!
    New Spark Plug Set from 1AAuto.com 1aau.to/ia/1AET...
    This video shows you how to install new spark plugs on your 2010-2017 Chevy Equinox. Spark is one of the four required components for an internal combustion engine to run. If your spark plugs are failing, worn, or dirty, you may experience rough starts, rough idle, poor performance, or poor mileage.
    • Check here for more videos on the 2010-17 Chevy Equinox: • Chevy Equinox 2010-201...
    This process should be similar on the following vehicles:
    2005 Chevrolet Equinox
    2006 Chevrolet Equinox
    2007 Chevrolet Equinox
    2008 Chevrolet Equinox
    2009 Chevrolet Equinox
    Tools you will need:
    • Flat Blade Screwdriver 1aau.to/oAe/1AX...
    • 5/8 Inch Spark Plug Socket
    • Ratchet 1aau.to/oCr/1AX...
    • Socket Extensions 1aau.to/oz7/1AX...
    Subscribe: / @trq
    Check out our playlist:
    Chevy Equinox 2010-2017 2nd Gen: • Chevy Equinox 2010-201...
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Комментарии • 23

  • @TRQ
    @TRQ  2 года назад +5

    √ *Watch the Video*
    √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
    √ *Do it Yourself*
    √ *Save Money*

  • @JamesSmith-gk8sz
    @JamesSmith-gk8sz 3 месяца назад +4

    For real, the best filmed, narrated, and explained maintenance video on spark plugs to date.
    It insultingly nuts how many mechanics have *no understanding* of torque values and how disastrous over or under tightening can be on a vehicle.
    Well done. Supremely helpful video.

  • @ClockFixer
    @ClockFixer Год назад +20

    I love RUclips University !

  • @alissasefcik1651
    @alissasefcik1651 2 года назад +7

    Thank you so much..I can do that myself now thanks to you.

  • @sulkaracoustics5087
    @sulkaracoustics5087 Год назад +9

    What size is the bolt for the Ignition coils?

  • @wreckagevic
    @wreckagevic 15 дней назад

    Is this the same blueprint when changing them on a 2011 Equinox with the V6?

  • @ElectroPercussive
    @ElectroPercussive 5 месяцев назад

    Very helpful video. Thanks.

  • @robertreynolds2726
    @robertreynolds2726 2 года назад +6

    No anti seeze?

  • @chevy498
    @chevy498 Год назад +2

    Good video

  • @victorwilliams4403
    @victorwilliams4403 9 месяцев назад

    Great video!!

  • @BillyBiggz
    @BillyBiggz 9 месяцев назад

    Do i have to have a torque wrench to tighten? I recall tightening basically enough to be tight, but obviously not over tightening....Im not familiar with the term you used when tightening? Help?!

  • @baltothewolf
    @baltothewolf Год назад

    Will it harm my car if I forgot to disconnect the cords that plug in the back while changing them?

  • @lexington476
    @lexington476 Год назад +5

    This is going to save me $100 from the shop wanting to do it.

  • @shellybelle6781
    @shellybelle6781 2 года назад +1

    I have a equinox 2009, and I don’t know how tight to screw it in . One keeps coming out

  • @nicholashelms2395
    @nicholashelms2395 Год назад +3

    Are you sure you twist the oil fill cap to the left because I twisted mine to the right with a huge pair of knipex pliers to get it off. It was really hard to do out it did come off but now when I twist it to the left to put it back on it won't go back on.

    • @_CiscoFranco
      @_CiscoFranco Год назад +5

      Leftie loosie righty tighty.
      Rotate clockwise to tighten. Counterclockwise to do the opposite

    • @NigelMelanisticSmith
      @NigelMelanisticSmith Год назад +1

      Did you let the engine cool off? You won't be able to twist it left with a hot engine.

  • @Said-bq9bj
    @Said-bq9bj Год назад +1

    Is it possible for the plug to be stripped ? & what shpuld I do then

    • @TRQ
      @TRQ  Год назад +2

      +Saïd If the plug is stripped, we would recommend replacing the part completely.

  • @mvmv2964
    @mvmv2964 Год назад

    Great video

  • @mikencrew8885
    @mikencrew8885 7 месяцев назад

    Where’s the 6 cylinder one

  • @mizzteareacts9397
    @mizzteareacts9397 3 месяца назад

    Why is it so easy but costs so much through a mechanic?

  • @brianbiehler3025
    @brianbiehler3025 3 месяца назад

    try using a new invention called light