Go to athleticgreens.com/vtuned to get started on your first purchase and receive a FREE 1-year supply of Vitamin D3+K2 and 5 travel packs. Thanks to Athletic Greens for sponsoring today's video!
Ben, You make the car exactly the way you want it. You will never please all these keyboard experts out there. Most of us think you are doing a great job!
I dig the look you're going for! There are many Mustangs out there, so doesn't matter if you customize one more that was already burned. Make it how you want, take your time, be prepared to fail and try again... it will turn out awesome!
I wish you had more content, more often. You are innovative and a refreshing breath of air. Your mellow and easy to watch and you don't tear up your cars on You Tube. I love your insite on the mustang and the fact that you are not just throwing it together with a bunch of expensive parts, just to call it done.
If the Camaro survives that long. They are being really rough with it given the font clip was never reinforced to handle the extra weight and power of that LS. vTuned is way stronger and he is actually taking great care to address issues before they become a problem.
@@thatmaverickguy859 Really? That is ridiculous if true, though given they're anything but perfectionists it wouldn't surprise me. Their work is shoddy and rushed.
Like I have always said from day 1, this is your channel, your cars & its your purgative on how you build your them. You are the one who needs to smile & be happy with your cars when you look at & drive them. This is probably one of the best videos you’ve done Ben. I support you & your choice to do as you see fit. See you in the next installment.
It took approximately 16 years to paint the Mona Lisa. Leonardo da Vinci painted the Mona Lisa between the years of 1503 and 1519. However, scholars tend to debate the exact timeline of the portrait’s completion. Some art historians believe da Vinci started the artwork later than 1503 based on the evolution of his style, while others argue that the portrait was never finished at all.
@George Absolutely not, HAHAHAHAHAHAHA. Thank you for the laugh. BIFB mustang is on another level compared to this, no offense it's just facts. You're saying this is better than a mid-engine, full custom chassis, custom one off wheels, custom widebody kit, etc. You're delusional lol.
Thanks Ben I like how bold the car will look. Keep at it and don’t get discouraged by negative comments. They are just jealous of your talent and vision .. maybe you could get summit racing onside they have a massive range of 65 parts. Good luck .
I was thinking the same thing, if he went with the bigger one but made so as it goes into the fender it gets closer to the body, like at an angle front to back, would make it flow better, imo.
To me the vents on the rear wheels are ppointless and could end up causing more noise than any cooling effect as the air going through will hit the tyre and do nothing to hlp cool the brakes .. It will also increase the air in side the wheel arch which most cars use vent at the rear of the arch to reduce the preasure adding a vent at the front will just increase the preasure in the arch
@@peteycrack215 bisforbuild just use mustang gt vents (i believe) and molded them into the body. i get vtuned might not want to copy it, but it's the way to go.
Bro! The build is awesome! Don’t listen to the haters. YOUR car is your personality. Do it as you please. I would build it the exact same. Keep up the excellent customization. It rocks!
Hey Ben, You're doing a great job on your Mustang. Build your car the way you want. If someone else wants to build it another way, they can buy their own burnt car and do the work themselves. You saved the car that probably would have been crushed. You have put in the time and it will be your vision. Keep up the great work. Thanks and we'll see you next time.
It's definitely going to be a unique '65 Mustang build in the end. At first I was doubtful but at the end of your video it is going to look really good.
At 34:19 🔥🔥🔥 Looks so clean. Love the direction you’re going with the build. Personally I don’t like old school cars but I watch every video on this channel because I love fab work and cars. But now you’re doing all this extra fab work and I’m loving it. Looks amazing. I love the “learn as you to style as well”.
I'm glad you are building the car to how you want it. That is what makes it unique and most of these other folks on here don't have vision or the talent/skill to achieve this level of building. After it is all said and done with bodywork and paint it will look absolutely killer. Keep up the great work brother!
Let the haters hate I love how this is turning out! Can’t wait to see what it’s done when it’s painted! The air vents are gonna flow for sure once they are right.
Only @vTuned garage is able to lower a car without actually lowering the car. Looks amazing man. Can’t wait to see the final product. 1 of 1 custom Mustang. Love it!
Awesome job on the fender flares.....you build the Stang the way you want it.... which is so cool..... can't wait for the next video..... good work Ben.......
You have some great ideas, this is going to be a very unique build. I'm looking forward to seeing it completed. Continue to have fun with this, it is your build, no one else's.
Go Ben, let nobody discourage you. You’re so talented and on a level of your own. Customize that car to your taste and while at it, enjoy the entire process. Give us more content as well. Bless up!
One must not forget that this is an entertainment channel and not to be viewed as an automotive engineering instructional guide. It’s a lot like “Pimp my ride” as long as it turns out shiny at the end is all that counts.
I love that you are going all out with this build and doing things you have never done before.👍 I did cringe every time you talked about how much the original design sucks! But.... I will hang in there until the end of the build.😋 SOOOOO happy you molded the flares into the fenders. I thought you were leaving it as it was at the beginning.🤣 I am glad to see you are pumped about this build again.
Ben, I recommend you slot the quarter panel half the distance or more of the length of the vent you made to bury the back part of the vent into the body. then you can push the quarter panel inward to create a vent opening. Then make and weld in filler pieces top and bottom on the newly created vent opening.
Excellent description and plan.I was going to suggest the same,but you worded it better.To cool the brakes,which are now in further,the vent needs to drop in as you described.Then he can build a channel to direct the air inside the well.
The only thing I don't like is vent, but the wide body fender looks good. The rear of the fender might look better if you open it up just a bit so it doesn't look like it's curving around the tire so much. I like where you are going with this build.
5:30 The old car hobby is a very big place, and I'm one of MANY people who love a car that's been returned to "day after production" condition. We're trying to preserve history so that future generations of car lovers will better understand how the world once was. However, the sales volume of 1965 Mustang hardtops produced (410,260 units) means that there's room for both customized cars and "time capsule" ones.
Thank you Cpt Obvious, so generous of you to give him permision to do something... everyone hinges on your thoughts and opinions your input is so valued as is your permission to do so
This looks cool, I haven't seen this build in a while and happy to see it's still going on. For anyone who has a negative comment on the design, let's see the one you built!
Make your ideal car, the way you envision it to be. If someone doesn’t like the/this build. They are free to build their own car, to their specifications 🎃
All good for you!! keep it up!! I like the idea keep it clean as you go, less work later on. it reminds me of the Gymkhana Mustang. Sweet F.....n ride at the end. From a 72 Mustang owner do your best!!!
No matter what other people thinks of your car, if you're happy with it, then that's all that matters! Keep building that Mustang the way you want it, it'll be cool in the end!😛 Also, as others mentioned in the comments, you need to put it against the Goonzquad Camaro when it's done! 😁👍
Ben, Glad to hear from you again, was afraid you were sick. Also glad you are feeling strong again, junk food will do you in !!! Love how the Mustang will look....
Amazing I also started trading with Mr Harold Russell recently, $670,000 profits in just 2 months and still counting, Mr Harold is the crypto trade king as far as am concerned.
😲. Awesome. Love this direction bro bro. Suprise. Bold with no build up was totally sick. No one has that. Should have run it like that for awhile. You've got years to build them out and it cost you jack to repaint later.
Ben, you do great work. It’s your car and if I were you I would build it like I wanted. But, think I would have installed mini tubs to carry wider tires.
Glad to see you're back on the mustang! Alot of people would get lazy at this stage and just finish it. You're doing it the way you want it and I give you credit for plugging ahead!
Ben, I like your ideas, you're turning a classic into a modern custom car, it's going to be a head turner when you're done! Just a suggestion, I had a hi-perf 66 fastback K car that had been modified by the factory for Shelby, it had the rear scoops and they were curved instead of flat, the two surfaces above and below the flat in the door are slightly curved so maybe add a slight curve to the scoop? Also, speaking as an old man that has had 6 knee surgeries, please take care of your knees, may I humbly suggest investing in some good knee pads to prevent bruising and tearing the meniscus membranes in your knees, they can only cut so much off and then it has to be a knee replacement prosthesis, and that will eliminate you from ever working or putting any weight on your knees. I'm looking forward to the build, and like you said, it's your car so build it like you want it, I seriously doubt any of those negative commentators could rebuild a wreck McClaren, so don't waste your time on their foolish comments!
I'm really enjoying this build Ben. DON'T STRESS the haters! Build it your way for yourself. Oh and what if you open the original rear vents and fab some internal venting tubes to the rear brakes? Just a suggestion. Your videos are great Keep em coming . Cheers from Sydney Australia MATE 🇭🇲👍🦘🇺🇸🇭🇲🦘👍🇭🇲
Loving the wide body look so far... I'll be like some of the other comments I read I don't see the need for a vent their is not enough space for anything so I feel no vent is needed B is for build has a massive wide body and can afford to use the vents. Like everyone else said this is your build and I will watch no matter what. Keep learning and keep teaching us along this journey.
You are incredibly creative and talented to pull off the things you do! I loved the McLaren build the best because you had so much excitement with it and it showed through your confidence, activity (That kept you in good shape), and look in your eyes. Family & great friends are what keep your Mojo strong. If you want support, it's there. Just ask. I here for you man. I'm jealous of your talent and so many things. Keep it up!
I love the ingenuity of your flares. I was wondering if you were going to box in the rocker? Right now it looks like it will water and any other trash. If not maybe at least some drain holes.
Hello ! it's a 21st century car ! U 're an artist, like sculptor or a painter, and right, U do what U want, express yourself. Some appreciate Oldies, me too, and some prefers creators, me too ;-)) big hug to everybody from me, from France , Alain
This looks amazing! Doing a semi exoskeleton cage and a unique paint job would be awesome. Definitely getting some death race vibes from it. Keep being creative and screw the haters!
Love the wider rocker, definitely makes the side profile look better. Makes me think of street racers of the 70's,. 80's and early 90's. It also makes me think of a street racer that could be in a movie. Keep Orange Crushing It!
You had me wondering if while you were chilling you bumped your head, but again you did it those flares look awesome cannot wait to see the finished product nice job Ben great video 👍 👍
I gotta say Ben that mustang is looking so dope I can't fricking wait til it's done,,, I love the route your going keep it up with a mustang that aggressive needs a dope color paint job not white please...
Hey man, I like what you’re doing but want to give you a heads up before you get too far. Mock up the front tire where it will fit and cycle it through its turning cycle. The original wheel opening is too small and wide tires tend to grab the bottom of the fenders when turning. I run an 315 front tire on my 66 and had to do a bit of clearance work. Good luck, keep the videos coming.
I cant say I'm a fan of the wide body flairs, I like a widebody that uses the cars existing body line, like it could have come out of the factory that way. But this is your build and you build it how you like it or want it ... each to their own. Everything else is looking good so far, hope you posted more often though. Keep up the good work. 💯
This mustang is gonna be freaking awesome Ben. Once your brothers especially Yuri and Paul get cracking with their skills it's gonna be one of a kind Mustang I tell you...
Looks good! Better than I was imagining. Rim design will be important. Needs to be simple IMHO. Also 18s front and rear and ditch the side vent or at least retain the shape of the existing fake vent. That is a Mustang characteristic.
.wish you would have gone with a true wide body kit, but of course your not done yet and I cant wait to see what your final product will be, I'm so glad you did more to the fenders because it was resembling the fenders off a utility trailer til you added the sheet metal. I was personally liking the direction you were going originally,
I have a suggestion, if you’re going to do a lot of custom metal work. Get an old school English wheel and it’ll make it easier to tighten up those curves on the flares and even making the wide body flares much easier and more uniformed. Definitely looking forward to the finished product.
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Go to athleticgreens.com/vtuned to get started on your first purchase and receive a FREE 1-year supply of Vitamin D3+K2 and 5 travel packs. Thanks to Athletic Greens for sponsoring today's video!
The V65 Mustang
That makes it look silly
car looking nice, but the vent looks hourendous
I actually really like the vents. F the haters!
No no no bubble the front and back fenders to the edge
Ben, You make the car exactly the way you want it. You will never please all these keyboard experts out there. Most of us think you are doing a great job!
I`ll Dito that....👍👍👍
Keyboard experts, are you one ?
I completely agree. Don't listen to the few unhappy people out there. The majority of us love this build 👍
AMEN!
Do what makes you happy dude
I dig the look you're going for! There are many Mustangs out there, so doesn't matter if you customize one more that was already burned. Make it how you want, take your time, be prepared to fail and try again... it will turn out awesome!
I wish you had more content, more often. You are innovative and a refreshing breath of air. Your mellow and easy to watch and you don't tear up your cars on You Tube. I love your insite on the mustang and the fact that you are not just throwing it together with a bunch of expensive parts, just to call it done.
When you finish this build you should drag race it against Goonsquads chevy Camaro🙏🏽
If the Camaro survives that long. They are being really rough with it given the font clip was never reinforced to handle the extra weight and power of that LS. vTuned is way stronger and he is actually taking great care to address issues before they become a problem.
VTuned Mustang is gonna smoked that Camaro
@@WhitentonMike and goonz Camaro has a fucked up rear end it's off set to the driver side
@@WhitentonMike I agree dude
@@thatmaverickguy859 Really? That is ridiculous if true, though given they're anything but perfectionists it wouldn't surprise me. Their work is shoddy and rushed.
Like I have always said from day 1, this is your channel, your cars & its your purgative on how you build your them. You are the one who needs to smile & be happy with your cars when you look at & drive them. This is probably one of the best videos you’ve done Ben. I support you & your choice to do as you see fit. See you in the next installment.
he will be really happy looking at it while it rusts away behind the shop after he soaks all the views he can out of it.
It took approximately 16 years to paint the Mona Lisa. Leonardo da Vinci painted the Mona Lisa between the years of 1503 and 1519. However, scholars tend to debate the exact timeline of the portrait’s completion. Some art historians believe da Vinci started the artwork later than 1503 based on the evolution of his style, while others argue that the portrait was never finished at all.
Can't say that I'm a fan of widebody, but it is absolutely yours and you do good work. Looking forward to seeing the final product.
@George Absolutely not, HAHAHAHAHAHAHA. Thank you for the laugh. BIFB mustang is on another level compared to this, no offense it's just facts. You're saying this is better than a mid-engine, full custom chassis, custom one off wheels, custom widebody kit, etc. You're delusional lol.
Thanks Ben I like how bold the car will look. Keep at it and don’t get discouraged by negative comments. They are just jealous of your talent and vision .. maybe you could get summit racing onside they have a massive range of 65 parts. Good luck .
What an aggressive look you are giving to this car! Awesome built! Excited to see the final look
I bet you this project will fail and it will finish like the previous one in the junk yard
@@josephfathallah8112 Looks like it’s headed that way.
Ben this thing is looking KILLER. I am more excited then ever. Make it your own. I can't wait to see what wheels you use.
I think the vent needs more work, maybe more rounded edges, but other than that it turned out pretty good at the end.
I was thinking the same thing, if he went with the bigger one but made so as it goes into the fender it gets closer to the body, like at an angle front to back, would make it flow better, imo.
To me the vents on the rear wheels are ppointless and could end up causing more noise than any cooling effect as the air going through will hit the tyre and do nothing to hlp cool the brakes .. It will also increase the air in side the wheel arch which most cars use vent at the rear of the arch to reduce the preasure adding a vent at the front will just increase the preasure in the arch
the fender flare looks great! the vent kinda ruined the flow for me.. front brakes need more cooling than rear brakes though..
He made a bird catcher
@@peteycrack215 bisforbuild just use mustang gt vents (i believe) and molded them into the body. i get vtuned might not want to copy it, but it's the way to go.
Bro!
The build is awesome!
Don’t listen to the haters. YOUR car is your personality. Do it as you please.
I would build it the exact same.
Keep up the excellent customization. It rocks!
Super clean dude can’t wait for the finished product
Going to look cool Ben! Build it how YOU want it!!! Been fun watching you learn as you go on your channel!
Hey Ben, You're doing a great job on your Mustang. Build your car the way you want. If someone else wants to build it another way, they can buy their own burnt car and do the work themselves. You saved the car that probably would have been crushed. You have put in the time and it will be your vision. Keep up the great work. Thanks and we'll see you next time.
Before you weld that flare on, don't forget to use it as a template for the other side, Great job and looks fantastic !
Great work - thanks for staying with this project car - they take time...
It's definitely going to be a unique '65 Mustang build in the end. At first I was doubtful but at the end of your video it is going to look really good.
Awesome job Ben! I can't wait to see you cruising in YOUR monster Mustang!
At 34:19 🔥🔥🔥 Looks so clean. Love the direction you’re going with the build. Personally I don’t like old school cars but I watch every video on this channel because I love fab work and cars. But now you’re doing all this extra fab work and I’m loving it. Looks amazing. I love the “learn as you to style as well”.
Nothing clean about this
I'm glad you are building the car to how you want it. That is what makes it unique and most of these other folks on here don't have vision or the talent/skill to achieve this level of building. After it is all said and done with bodywork and paint it will look absolutely killer. Keep up the great work brother!
Let the haters hate I love how this is turning out! Can’t wait to see what it’s done when it’s painted! The air vents are gonna flow for sure once they are right.
🤣🤣🤣🤣🤣
car looking amazing and you can do whatever you want you and your brothers are just the best at this job
Holy cow that looks better than the fibreglass thats out there , top job !
Only @vTuned garage is able to lower a car without actually lowering the car. Looks amazing man. Can’t wait to see the final product. 1 of 1 custom Mustang. Love it!
At the end of the day, we are all with you on this build till the end, you envision something and YOU WILL make it happen. Great video big dawg.
Awesome job on the fender flares.....you build the Stang the way you want it.... which is so cool..... can't wait for the next video..... good work Ben.......
You have some great ideas, this is going to be a very unique build. I'm looking forward to seeing it completed. Continue to have fun with this, it is your build, no one else's.
Go Ben, let nobody discourage you. You’re so talented and on a level of your own. Customize that car to your taste and while at it, enjoy the entire process.
Give us more content as well. Bless up!
I think this is a great upgrade to the mustang. I'm glad it'll stand out among the thousands of other classic mustangs
By far the most underrated RUclipsr out there. His work is so clean, precise and creative! Great content!
You must watch some incredibly dull and overrated garbage if you think this is underrated.
It’s really starting to come together! The wide body really makes it!!!
It's your build. Do whatever you want with it. Looks perfect.
The air vent may look better if you take it up too where the door starts👍🏻
Awesome build so far. The fender flares remind me Ken Blocks Hoonicorn. Really cool
It's been a while. Welcome back boss!
One must not forget that this is an entertainment channel and not to be viewed as an automotive engineering instructional guide. It’s a lot like “Pimp my ride” as long as it turns out shiny at the end is all that counts.
I love that you are going all out with this build and doing things you have never done before.👍
I did cringe every time you talked about how much the original design sucks! But.... I will hang in there until the end of the build.😋
SOOOOO happy you molded the flares into the fenders. I thought you were leaving it as it was at the beginning.🤣
I am glad to see you are pumped about this build again.
Dont worry about what ppl are saying. It looks cool. I am enjoying your work, thought, creativity for all of this. Keep moving on. Awesome job!
Ben, I recommend you slot the quarter panel half the distance or more of the length of the vent you made to bury the back part of the vent into the body. then you can push the quarter panel inward to create a vent opening. Then make and weld in filler pieces top and bottom on the newly created vent opening.
Excellent description and plan.I was going to suggest the same,but you worded it better.To cool the brakes,which are now in further,the vent needs to drop in as you described.Then he can build a channel to direct the air inside the well.
LOL, I literally thought you were going to just use the trailer fenders as the wide body kit, glad I watched until the end!! Love the chanel.
The only thing I don't like is vent, but the wide body fender looks good. The rear of the fender might look better if you open it up just a bit so it doesn't look like it's curving around the tire so much. I like where you are going with this build.
5:30 The old car hobby is a very big place, and I'm one of MANY people who love a car that's been returned to "day after production" condition. We're trying to preserve history so that future generations of car lovers will better understand how the world once was. However, the sales volume of 1965 Mustang hardtops produced (410,260 units) means that there's room for both customized cars and "time capsule" ones.
I think the majority would agree that it’s your build and you can customize this car exactly how you see fit.
Thank you Cpt Obvious, so generous of you to give him permision to do something... everyone hinges on your thoughts and opinions your input is so valued as is your permission to do so
the majority of clueless dick riding internet fanboys would agree.
@@slowery43 You seem so aggressive 🫣🤣
@@slowery43 He thinks everyone wants his advice.
This looks cool, I haven't seen this build in a while and happy to see it's still going on. For anyone who has a negative comment on the design, let's see the one you built!
Make your ideal car, the way you envision it to be. If someone doesn’t like the/this build. They are free to build their own car, to their specifications 🎃
All good for you!! keep it up!! I like the idea keep it clean as you go, less work later on. it reminds me of the Gymkhana Mustang. Sweet F.....n ride at the end.
From a 72 Mustang owner do your best!!!
No matter what other people thinks of your car, if you're happy with it, then that's all that matters! Keep building that Mustang the way you want it, it'll be cool in the end!😛
Also, as others mentioned in the comments, you need to put it against the Goonzquad Camaro when it's done! 😁👍
Ben, Glad to hear from you again, was afraid you were sick. Also glad you are feeling strong again, junk food will do you in !!! Love how the Mustang will look....
This is one of the funniest builds i have ever seen on the Tube, well done keep up the comedy show 🤣🤣🤣🤣🤣🤣
Wow! I’m impressed by your creativity and vision! I can’t wait to see it all done!!
The car lost the beautiful classic shape and became ugly
I think its lookin sick. Cyberpunk Synthwave vibes with it. Keep up the great work fam! Thank you for sharing with us your vision on your ride.
Investing in crypto now should be in every wise individuals list, in some months time you'll be ecstatic with the decision you made today
Amazing I also started trading with Mr Harold Russell recently, $670,000 profits in just 2 months and still counting, Mr Harold is the crypto trade king as far as am concerned.
I invested in your mother instead.
😲. Awesome. Love this direction bro bro. Suprise. Bold with no build up was totally sick. No one has that. Should have run it like that for awhile. You've got years to build them out and it cost you jack to repaint later.
Looks like a dually truck, now it can't be unseen!
It's Lookin Great man! People gotta remember stuffs gotta get Ugly first before it can look Awesome! Good job!
there is not a damn thing that will bring this car back from ugly
@@13christbane said nobody ever
Athletic greens is simply the best.
I love it and swear by it.
Ben, you do great work. It’s your car and if I were you I would build it like I wanted. But, think I would have installed mini tubs to carry wider tires.
Glad to see you're back on the mustang! Alot of people would get lazy at this stage and just finish it. You're doing it the way you want it and I give you credit for plugging ahead!
Wow Beb for a one man show you are nailing this build looking sick. Thanks for sharing. Take care bro.
Looks great, keep going. Give the lights a modern touch as well, it will look super cool.
Ben, I like your ideas, you're turning a classic into a modern custom car, it's going to be a head turner when you're done!
Just a suggestion, I had a hi-perf 66 fastback K car that had been modified by the factory for Shelby, it had the rear scoops and they were curved instead of flat, the two surfaces above and below the flat in the door are slightly curved so maybe add a slight curve to the scoop?
Also, speaking as an old man that has had 6 knee surgeries, please take care of your knees, may I humbly suggest investing in some good knee pads to prevent bruising and tearing the meniscus membranes in your knees, they can only cut so much off and then it has to be a knee replacement prosthesis, and that will eliminate you from ever working or putting any weight on your knees.
I'm looking forward to the build, and like you said, it's your car so build it like you want it, I seriously doubt any of those negative commentators could rebuild a wreck McClaren, so don't waste your time on their foolish comments!
I'm really enjoying this build Ben.
DON'T STRESS the haters!
Build it your way for yourself.
Oh and what if you open the original rear vents and fab some internal venting tubes to the rear brakes?
Just a suggestion.
Your videos are great
Keep em coming .
Cheers from Sydney Australia MATE
🇭🇲👍🦘🇺🇸🇭🇲🦘👍🇭🇲
Loving the wide body look so far... I'll be like some of the other comments I read I don't see the need for a vent their is not enough space for anything so I feel no vent is needed B is for build has a massive wide body and can afford to use the vents. Like everyone else said this is your build and I will watch no matter what. Keep learning and keep teaching us along this journey.
Awesome build. Keep it up. Love the widebody setup. Looks very clean
You are incredibly creative and talented to pull off the things you do! I loved the McLaren build the best because you had so much excitement with it and it showed through your confidence, activity (That kept you in good shape), and look in your eyes. Family & great friends are what keep your Mojo strong. If you want support, it's there. Just ask. I here for you man. I'm jealous of your talent and so many things. Keep it up!
Ben the car looks great can't wait until its finished. Keep up the good work and don't let those negative people get you down
I love the ingenuity of your flares. I was wondering if you were going to box in the rocker? Right now it looks like it will water and any other trash. If not maybe at least some drain holes.
Hello ! it's a 21st century car ! U 're an artist, like sculptor or a painter, and right, U do what U want, express yourself. Some appreciate Oldies, me too, and some prefers creators, me too ;-)) big hug to everybody from me, from France , Alain
the is not a damn thing 21st century about this car.
Good work mate - stick with it, you'll get there.
This looks amazing! Doing a semi exoskeleton cage and a unique paint job would be awesome. Definitely getting some death race vibes from it. Keep being creative and screw the haters!
Love the wider rocker, definitely makes the side profile look better. Makes me think of street racers of the 70's,. 80's and early 90's. It also makes me think of a street racer that could be in a movie. Keep Orange Crushing It!
You had me wondering if while you were chilling you bumped your head, but again you did it those flares look awesome cannot wait to see the finished product nice job Ben great video 👍 👍
I really just hope everyone really understands how good he really is with cars!!! He’s just on a different level man!
Ben is the young "CHIP FOOSE" attention to detail is bar none 🤙🤙
The way your cutting and molding the body lines is beautiful this car will be amazing and cool it will be a vtuned edition
Nice work man. That’s gonna look clean when you are done. Can’t wait to see the finished car. 👍🏾
So good...not only rebuild but also design...well done
I gotta say Ben that mustang is looking so dope I can't fricking wait til it's done,,, I love the route your going keep it up with a mustang that aggressive needs a dope color paint job not white please...
Daammnn...absolutely true craftsmanship!!
i think its looking fantastic , cant wait to see it all painted
Hey man, I like what you’re doing but want to give you a heads up before you get too far. Mock up the front tire where it will fit and cycle it through its turning cycle. The original wheel opening is too small and wide tires tend to grab the bottom of the fenders when turning. I run an 315 front tire on my 66 and had to do a bit of clearance work. Good luck, keep the videos coming.
Build what you want to build man. Looking good so far!
Epic build ,love your work ,well done ,one suggestion buy a metal guillotine ,keep up the great work
That looks insane! This is going to be an absolute beast!
I cant say I'm a fan of the wide body flairs, I like a widebody that uses the cars existing body line, like it could have come out of the factory that way. But this is your build and you build it how you like it or want it ... each to their own. Everything else is looking good so far, hope you posted more often though.
Keep up the good work. 💯
Loving the look of the car, go with your gut feeling!!! Regards from Spain!!
The Mustang looks sick! Keep going Ben. This is a awesome project.
This mustang is gonna be freaking awesome Ben. Once your brothers especially Yuri and Paul get cracking with their skills it's gonna be one of a kind Mustang I tell you...
Good to see your taking some time for your health. Get healthy and you’ll be at it better than before. Cars looking tough!
a masterpiece in the making! Keep at it bro!! Lots o' love from Malaysia
I like your thinking on this project. I can't wait to see it completed.
Looks good! Better than I was imagining. Rim design will be important. Needs to be simple IMHO. Also 18s front and rear and ditch the side vent or at least retain the shape of the existing fake vent. That is a Mustang characteristic.
I like the uniqueness of your project. Can’t wait to see it all painted and ready to hit the car shows.
Car shows? Lol
About time you were back you do what makes you happy 😊
.wish you would have gone with a true wide body kit, but of course your not done yet and I cant wait to see what your final product will be, I'm so glad you did more to the fenders because it was resembling the fenders off a utility trailer til you added the sheet metal.
I was personally liking the direction you were going originally,
Quit doubting yourself and just do it the hate comments will always be there dont worry about that just do your research and build it you got this
I have a suggestion, if you’re going to do a lot of custom metal work. Get an old school English wheel and it’ll make it easier to tighten up those curves on the flares and even making the wide body flares much easier and more uniformed. Definitely looking forward to the finished product.