those turbos will rock your world I run a DSM68HTA on my 4G63t and its the same td-04 modded by forced performance I know I love the power output from it and it spools fast and with those injectors it shouldn't give you to much trouble seeing those numbers he is talking about with the pump putting out those number.
@@spooling1g the td04 should easily produce the same numbers the td05 does especially on what he has machined into them i found his video explaining what he did to them on here and its better built then even the factory did it uses audi parts so you can rebuild them if those parts wear out.
www.primaryboost.com/3s/dynocharts/ I did not see any aftermarket manifolds. With out those there is no way to see full potential of 20t let alone match flow of a tdo5 on a tdo5 manifolds. Cant make the power if you cant move the air.
In depth tuning guide? I know when I tuned my ChromedECU there was so much confusion and it took me a while to figure it out. Very nice build, very similar to mine... good choices on parts.
Finally some vr4 footage and away from Mazda. Way to ruin the whole Vader vr4 theme with the damn polished fmic. Why didn’t u get the intercooler in blk. Wuda blend in with everything else
After the 4 year built Iam Running HL 20ts w Antisurge housing w HL 9blade turbine wheel + 1.1bar pre dialed gates. I am Fully forged 4bolt w stage 3 heads on AEM v1, Deatschwerks 1200ccs, and full supporting mods. Cx dual core fmic kit. Missing aftermarket cams + adj cam gears thou. Plan on running speed density as well w occ+ krank vent system. If you check my channel Its very close to being finished. I have a local tuner at CFT. Everything is in possesion just waiting to install headers turbos ect. From my mod list Can i get some guesses on what i should make whp on E85 w safe tune high boost?
700 hp - 750hp are your talking crank or to the wheel. I find it hard to believe it will make 700 awhp... I say I would guess it would make 480 awhp max on pump gas....560 awhp on race or e85.....either way I love the car keep it up guys
They should have gone with DR750 turbos. With aftermarket manifolds and e85 they make every bit of 700 and 700 and they are the biggest/best tdo4 turbo made for the vr4. 20ts might not get that high but they will be about to 600. www.primaryboost.com/3s/dynocharts/
@@clarencewicks1882 I love the dr750s....they are amazing!!!!! I own a twin 16g and a twin 19t. My friend owns a dr750...his car is a monster. ....i bet these 20ts will be an amazing pulling car.
I’m new to this Chanel and I was wondering how throtl actually works do they have their own where house with all the parts in it or is it just a website with links to other websites with the products and price ect just wondering how they work
@@Mrpartyallnight101 ahh i forgot what gen it was. Had a few buddies with a couple of these so only know partial knowledge. If it were a 8g vr4 id know more lol
They won't make 700 with this though. The stock maf won't go that high. They would have to get a jester maf or a blow thru like GM mas or similar. Everything else is good for 700+ though. So 500hp is where this car should be after they are done. Unless they change the MAF sensor.
Awwwwkward flex. Why make a whole video on all the parts when you show and explain them in the install videos? So that you get to say "if you didnt see the video where we unboxed this and much more go ahead and watch that video, we got a lot coming for the vr-4"?
Those tiny turbos can make some great power! People are making 650+ whp and tq to the tires using td04’s.
Yes beats the 16g as far as bang for buck and gets full boost at 20t 3250rpm vs 16g 4500rpm. Both require forged bottom end tho.
Cool. Excited to put my td04-20hl turbos on mine and install my aem v2
I'm getting excited too!
Can't wait to see it pull
Really looking forward to some Jester ecu tuning
I can’t believe you guys are giving this beast away
Yall are coolest fellas Micky ur rx-7 is still the hottest ride in the shop. Imo. This vr4 build and mr2 are primo. Keep it coming guys
im with mickey on the bov sound
I may use that whole set up on my 93 dodge stealth twin turbo. That’s the power range I’m going for.
6:37 I told you guys samsquanches are real
This VR4 will be chasing down a bunch of people like Darth Vader chasing Luke in a Tie fighter. 👍🏻
Really need to get that intercooler PC in black
Aye one of the first you guys are awesome keep up the good work I love the 3000gt content I have one myself
those turbos will rock your world I run a DSM68HTA on my 4G63t and its the same td-04 modded by forced performance I know I love the power output from it and it spools fast and with those injectors it shouldn't give you to much trouble seeing those numbers he is talking about with the pump putting out those number.
Td04 has nothing in common with the td05 based hta....
@@spooling1g the td04 should easily produce the same numbers the td05 does especially on what he has machined into them i found his video explaining what he did to them on here and its better built then even the factory did it uses audi parts so you can rebuild them if those parts wear out.
With an aftermarket exhaust the tdo4 will do ok but will not "easily" match or match at all what the best tdo5 for this platform will do.
@@clarencewicks1882 here is what he has done to the turbos its looks like he did what FP did with the 68hta. ruclips.net/video/4lfTsCVjNqA/видео.html
www.primaryboost.com/3s/dynocharts/ I did not see any aftermarket manifolds. With out those there is no way to see full potential of 20t let alone match flow of a tdo5 on a tdo5 manifolds. Cant make the power if you cant move the air.
@ 6:39
Yall see the mystical chacfoot behind yall?? 😧😧😧
🤣🤣🤣
Win a trip to throtl would be sick as well gents. Just a suggestion. Cars and some drinks with the dudes.
Jeez, can't wait to see this car done !
Mickey went ham on that box at 5:25
It has to be said this 3000GT VR-4 has to be the best yet!
mickey’s face priceless 😒 Lol
Mickey’s “WOOOOOOO” at 1:10 sounded better than the blow off valve
Love that blow off but wonder if I can find a turbo like that for my RB25 🤔🤔🤔
Damn, its getting sicker!
The 3000GT is going to Rock, Have you guys ever thought of trying a Pro-Charger belt driven Turbo instead to keep Heat down on your builds?
A pro charger isn’t really a turbo but a centrifugal supercharger
Do a mark3 Supra chasis next with a 7mgte ...honestly know you guys will build it right. 💯
Throtl ViP squad good morning guys turbo VR4 time 👍😊
You should do time-lapse comparisons on a racetrack before and after
Beautiful VR4! 👍🏼
That turbo kit looks like its gonna be mad fun to install lol little jealous 😂🔥
mad fun to pull the engine out because mitsubishi decided to put an inline six fucking sideways
Man I totally need any car but if I got the 3000gt.... words cant describe what it would mean to win it.
We want some more MR2 content. I can't wait for more videos for the MR2.
In depth tuning guide? I know when I tuned my ChromedECU there was so much confusion and it took me a while to figure it out. Very nice build, very similar to mine... good choices on parts.
Yeew mad power in the vr4!!!
Baby turbos
That pack a punch...
What the hell I watched this whole damn video and thought they were going to install them
vr4 i love it!
nice intro !!! fast & furious mood ahaha love you throtl
Evan looked like a dad on Xmas day watching his kids open presents that he bought.
Is it me or has Mickey seemed super uninterested in the vr-4? You can tell Mickey is through and through a rotary guy.
Yeah I thought the same thing.
@@MichaelBacon212 yea i been seeing the same thing lol
You'll understand when you buy a rotary ;)
Lol with all due respect... absolutely not. Never
@@themojogt lmfao
Im 14 but man thats awsome my bros keep it up thanks
Looks stunning apart from those headlights! For me let's it down and really dates it. The rest is sick as hell!
yikes
Run no bov an call it the dose Vader !
Vader going too be a sexy beast
Love this build so far... hope I win it... I'll keep it and pass down my old car to my son LOL!
Finally some vr4 footage and away from Mazda.
Way to ruin the whole Vader vr4 theme with the damn polished fmic. Why didn’t u get the intercooler in blk. Wuda blend in with everything else
Yo ! I would love if you can show a way to replace the lower control arm ball joint in the 3000gt since it’s a very common thing to go out in a 3000gt
Do you know where I might find a long block for a 92 vr4 awd tt model for a reasonable price?
When will you guys announce the winner??
All the Vader this and that and it’s gonna have a bay full of bling and a f&f bov 😅
How come if you go on the site they don't have anything on this vid anymore or just me?
Do yu know what headers are compatible with a 2009 Ford Taurus 3.5L or
Guapísimo!!👍👍
Sick af
As a VIP monthly member, you get 2 entries per month? Or do you need to sign up and pay the full year to receive 4 entries?
You get 2 entries every month during the sweepstakes. So signing up today would result in 4 entries
throtl perfect! I signed up today. 🙂
Why didn't you guys go with the AEM2 ems?
Why Rick looking all akward in the beginning lol he know something we don't 🤔
are you keeping the engine stock otherwise?
After the 4 year built Iam Running HL 20ts w Antisurge housing w HL 9blade turbine wheel + 1.1bar pre dialed gates. I am Fully forged 4bolt w stage 3 heads on AEM v1, Deatschwerks 1200ccs, and full supporting mods. Cx dual core fmic kit. Missing aftermarket cams + adj cam gears thou. Plan on running speed density as well w occ+ krank vent system. If you check my channel Its very close to being finished. I have a local tuner at CFT. Everything is in possesion just waiting to install headers turbos ect. From my mod list Can i get some guesses on what i should make whp on E85 w safe tune high boost?
Look F* Awesome
The tiniest turbos 😂😂
700 hp - 750hp are your talking crank or to the wheel. I find it hard to believe it will make 700 awhp... I say I would guess it would make 480 awhp max on pump gas....560 awhp on race or e85.....either way I love the car keep it up guys
They should have gone with DR750 turbos. With aftermarket manifolds and e85 they make every bit of 700 and 700 and they are the biggest/best tdo4 turbo made for the vr4. 20ts might not get that high but they will be about to 600. www.primaryboost.com/3s/dynocharts/
@@clarencewicks1882 You are correct!
@@clarencewicks1882 I love the dr750s....they are amazing!!!!! I own a twin 16g and a twin 19t. My friend owns a dr750...his car is a monster. ....i bet these 20ts will be an amazing pulling car.
@@streamlobby2341 They should copy Ray pampenas set up.
They should have ray tune it if they want the most out of the set up. Something for the new owner to do.
How much a kit like that would have cost
New to the channel
I’m new to this Chanel and I was wondering how throtl actually works do they have their own where house with all the parts in it or is it just a website with links to other websites with the products and price ect just wondering how they work
We have one of the biggest inventories out there. Distribution network across the whole US :)
Dayummm very impressive
I’m from Australia so I can’t win anything it sucks so much
Damn you guys are really going the extra mile with these give away cars
I really hope this has the upgraded transmission with the better spline count otherwise the winner is going to have a bad time lol.
Nahhh its a 2G so its fine. 91-92s are the ones with that problem.
@@Mrpartyallnight101 ahh i forgot what gen it was. Had a few buddies with a couple of these so only know partial knowledge. If it were a 8g vr4 id know more lol
It's not the size of pipe you have, it's how you use it..
Nice
what wheels are those ? advan what ? Thank you
"I find your lack of boost.... Disturbing..." -Vader VR4
Where is the video of you working on it like promised last vid????? Get to it already please!!!!!!
Becky!!!!!
6:38 Hi TJ
Know any one with driver door and front fender????
How much does it cost ?
Please don’t sell the vr4 😭
I agree with Mickey. That "Fast and furious" blow off sound is terrible, awful, and makes my ears cringe.
i feel the same
Drink the coolaid for a free shirt... thats getting drunk fast.
DAMN! ☝️👍🏼💕
Throtl, where the bois buy 4 project cars and shelves all of them 😂😂
Day 1,000,000,000 without any update on the BMW e46
The E46 is my daily! We’ve had too many projects so I’ve put that one on hold to focus on the rx8, e36, vr4 and soon the mr2!
Are you seriously using those baby ass turbo’s
Also 7th person
700+ awhp and no big turbo lag? Not good enough for a 25 year old street car?
Lol love it when i pop the hood of my 3000gt and people say the sameee thing"baby turbos!!" Arent they cute? Lol
What's "no lift shift"?
Shifting gears without lifting from the gas
@@henrylima6974 can't imagine.👌👍
hey, i need my ricky fix^^
Yo
Mickey
There’s no way them tiny ass turbos gonna make 750 😂
Your wrong.
And just so you know for sure. You're wrong Isaiah.
They won't make 700 with this though. The stock maf won't go that high. They would have to get a jester maf or a blow thru like GM mas or similar.
Everything else is good for 700+ though.
So 500hp is where this car should be after they are done. Unless they change the MAF sensor.
Lol its possible.
Also need to change out stock manifolds and even then 700awhp is a big stretch.
Mr2 update pleezzz
who is that guy in the middle? lmao
Really 3 down votes?
Front bumper needs a lip on it
if youre going to use a greddy style bov at least buy a real one
Awwwwkward flex. Why make a whole video on all the parts when you show and explain them in the install videos? So that you get to say "if you didnt see the video where we unboxed this and much more go ahead and watch that video, we got a lot coming for the vr-4"?
That blowoff sound 🤮🤮🤮🤮🤮🤢🤢🤢🤮🤮
Lmao those turbos are not rated at 700hp dont care what turbo lab says..maybe 400whp on e85.
A lot more than that. TD04 turbos like the DR 750's will make 700+whp on E85. These are good for at least 600 awhp with the correct supporting mods.
ID’s are overrated af. And their customer service sucks
Early! :)
The PUB Chanel. 👎
I can’t believe you guys are giving this beast away