Chevy Truck Upper Ball Joint Replacement | Avalanche 2500

Replacing an upper balljoint on a 2500 chevy truck. This joint was loose and needed to be replaced. The tools can be rented from your local auto parts store.

[@jamesdufresne4738]

Awesome video straight to the point without all the BS you rocked it 👍👍✌️

[@calebstallings954]

Thanks brother, just did my 1st upper ball joint on my 02 Silverado 2500hd, the fnnn snap ring was the hardest part

[@VetteDaily]

That is great! Informative and not long at all, I wish I had your patience to get content on my channel, you have a way of explaining things perfectly. Keep it up!!!

[@scp-076-nnable-3]

?
L

[@juil]

Thank for help. I did it.

[@felixliriano2081]

I cant put on the rubber boot on

[@tracyphillips3325]

Great video!

[@fzebaseball9]

Great video I appreciate it being to the point and not being 15 mins. What are the specs for the poundage when tightening the castle nut? And did you also use a grease gun to pump grease into the ball joint?

[@jakegilly6438]

I have to do upper and lower so would it be easier to use a lift for the upper because you have the jack on the lower control arm?

[@HollywoodMGB3]

did you leave the torsion bar loaded, or did you unload it?

[@PlanetLutetium]

Wish I would have watched this one first. The first one was 15 minutes long and removed the whole arm. I'll avoid that if possible. Great video.

[@mikeospina1737]

Hey Zent. What are some critical upgrades you'd recommend for an AP2 S2K before taking it to the track?

[@ZentRose]

I have gone with a stock one but at the very least put some higher temp brake fluid in there. If you have the budget: castrol srf with pmu club racer pads, track alignment, and some sticky tires like hankook rs4 would make for a very fun and capable track car.

[@heribertomunozcervantes3848]

Is the upper ball joint supposed to move up and down? To the point where it hits the snap ring and then the top of the BJ?

[@TougeTime]

Hey zent. What camera and mic are you using now?

[@ZentRose]

Gopro 7 black for this video. If I'm shooting for work I use a canon m6 with a sigma art lens, lights, and sennheiser mics (a bunch of crap you don't really need).

[@sirsweetness8332]

Inboard? The Moog instructions say hole on rim of ball joint towards tire.

[@carlosholguin3182]

I highly appreciate it I did it myself on the passenger and now I did it on the driver but my lower driver about joint needs to be replaced do you have a video for that one

[@nolancordero6130]

Good shit.

[@stirlingmoore]

Only reason I'm giving a thumbs down is you called your hd truck a car lol