Did you embedded reinforcement into the adjacent wall as well? Because only in this case it will serve as a cantilevered slab and that's ok. Otherwise, it will collapse for sure.
No, the cantilevered stairs are in tact by the great compression of the roof on the walls. The structure of the building is made from bearing walls so the compression on the walls is enough
The staircase work is very good as well as the masonary work is very neat nd clean ..keep doing this type of work ..nd keep posting this type of work..
Firstly i am appreciating for your skill.Sir , i have plan to construct floating stair inside house by metal.What do you suggest ? Concrete or metal which is more stronger and easier ? Thanks for your reply.
We can remove the temporary support 48 hours after putting the roof slab. Because after slab casting the load on bricks is more to hold the slab and not being toppled.
Yes, it is safe for the wall. Till it has a slab on top. The weight of slab is huge and it prevents stepping slab to topple. The step may break in case of heavy load, but wall will be intact, due tremendous weight of slab on the wall.
Its equally strong if designed well. But it is not recommended to have more than three feet wide hanging stairs. That's the limitation because it won't be strong enough then.
Hello sir...after watching this video we got a idea of installing floating slab of 2' wide next to the window..window is 6' wide ...is it possible to cast a 2'x 6' floating slab like this...to sit and hangout near the window...it is an appartment and it is already constructed and is it possible after construction...please give ur suggession...
After construction that too if windows are installed, it's not possible. However you can cast the slab of asked dimensions and put in the window sill and to support the slab put steel brackets on the projection side. Make brackets beautiful so that it looks architectural beauty. Some thing like this www.pinterest.com/pin/57350595243196698/?nic_v2=1b32MMYMV
Sir can we make it possible by screwing a cantilever ms frame work to the wall below window sill and then lay some wood on the frame...js thinking of cantilever bench possibilities..🤔...like we do in some cantilever stair cases where we take separate flat rod for each step...pls don't mind for too many questions sir...eager to learn to more possibilities as an young architect😊
The landing has been done at lintel level of you see the video. The slab has been extended from that beam. We have to design it in such a way that landing level comes at lintel level.
not correct really, we have to have a beam along the stairs on top of the wall. Tread bars should be anchored in to it and it should be monolithic concrete. then only the step will act as cantiliver action
Binod, your can order any precast manufacturers. But i would suggest that you do this at site. It's very simple and you can do it without using shuttering.
These steps have width equal to brick (9 inches) and the thickness of slab is 3 inches to match the brick. The length is 3 feet. We have three 10mm bar as reinforcement 3/4 inch from top.
You can do this but you need the thickness of slab to be 4 inches and wall have to be 13 inches instead of 9 inches. Secondly we cannot have exposed brick because the thickness of slab and brick won't match.
Wooden staircase can be done but it has to be inside as rain and weathering may soul it outside. However you can use MS frame and can put wooden planks on it. I have used stone in other case. The video will be uploaded this wekend.
Is the construction cost more costly than staircase with Raiser...When I connected with builders for this, they said it's more costly and complex too...
Dear Selva, any prefab construction is cheaper than cast in situ if done at site. This construction was little cheaper when i did it. I saved big money on shuttering and the quality was better. In India any thing that is not traditional is considered costly. A good Contractor and engineer will always starve for challenges.
Did you embedded reinforcement into the adjacent wall as well? Because only in this case it will serve as a cantilevered slab and that's ok. Otherwise, it will collapse for sure.
No, the cantilevered stairs are in tact by the great compression of the roof on the walls. The structure of the building is made from bearing walls so the compression on the walls is enough
Sir plz upload more of these find of videos , very skilful and very helpful pratical knowledgeable
Nice use of skills, we don't get such skillful professional everywhere. Nice job keep it up...
Thank you so much Prabhash. 🧡
Excellent work... Please keep posting
I will keep doing. Thank you for your appreciation.
Thanks for very clear practical video
Very very Informative video.... Well done.
Thank you piyush.
Wall pe load le leti ye stair case?
The staircase work is very good as well as the masonary work is very neat nd clean ..keep doing this type of work ..nd keep posting this type of work..
Thanx khalid bhai. 🤘
I am also doing construction stories, that how we construction professional do our best, butt society did not realise our achievements.
Simple and great job
Firstly i am appreciating for your skill.Sir , i have plan to construct floating stair inside house by metal.What do you suggest ? Concrete or metal which is more stronger and easier ? Thanks for your reply.
Hai , how to brick work in between beam....also same exposed brick.....like full double height wall 18 feet.
How long it would lasts ? Approx 50 years possible ?!
Metal staircase same method?
Yes you can do that.
how much load a single step can bear??
may i know after how many days did you remove the reinforcement given by bricks?
We can remove the temporary support 48 hours after putting the roof slab.
Because after slab casting the load on bricks is more to hold the slab and not being toppled.
It would be better to provide a beamwork and the stairs release from that beam
is 3 feet total length of slabs or it is exposed part
Jyada bajan padne per tutne ka khatra ?
No, is8 just 3 feet, just like any projection. For example balcony.
Es m led strips wali light KesE Lagegi ??
R u constructed any railing for this
Are these steps vibrating when someone walks through it.??
No they do not. Make the slab 3" think (75mm). Reinforce with 3, 10mm bars 3/4" from top.
But yes, if we jump on them, we may feel vibration.
Sir Maine apni shop par aisi stairs banvai ha lakin ab band krni ha kaise kare?
I want know how to use this skill if wall is already builded
If wall is already built, we can do nothing. Many designer do the plaster and make brick design on them and then paint it.
Is it safe for the wall ?
Yes, it is safe for the wall. Till it has a slab on top. The weight of slab is huge and it prevents stepping slab to topple. The step may break in case of heavy load, but wall will be intact, due tremendous weight of slab on the wall.
is it strong enough
Its equally strong if designed well. But it is not recommended to have more than three feet wide hanging stairs. That's the limitation because it won't be strong enough then.
Will it last for 20 yrs
It will last till your slabs and wall last. It can last 75 years if workmanship is good.
Can you provide the Steel rod details used in preparing those slabs for steps
Also... Proportion of material to be used for best results
There were four main 10mm bars were used tied with 10mm bar at 8 inches apart. The concrete ratio was 1:2:4.
@@Understanding1 thanks a lot
@@Understanding1 1:2:4 means M15 grade... What do you suggest.. M15 or M20??
Also what are the dimensions of each step
Hello sir...after watching this video we got a idea of installing floating slab of 2' wide next to the window..window is 6' wide ...is it possible to cast a 2'x 6' floating slab like this...to sit and hangout near the window...it is an appartment and it is already constructed and is it possible after construction...please give ur suggession...
After construction that too if windows are installed, it's not possible. However you can cast the slab of asked dimensions and put in the window sill and to support the slab put steel brackets on the projection side. Make brackets beautiful so that it looks architectural beauty. Some thing like this www.pinterest.com/pin/57350595243196698/?nic_v2=1b32MMYMV
@@Understanding1 okay sir..tnku somuch👍
Sir can we make it possible by screwing a cantilever ms frame work to the wall below window sill and then lay some wood on the frame...js thinking of cantilever bench possibilities..🤔...like we do in some cantilever stair cases where we take separate flat rod for each step...pls don't mind for too many questions sir...eager to learn to more possibilities as an young architect😊
You can do it. That's how is done.
Sir what about the landing ?
let use know the design procedure of these floating stairs
The video is self explanatory. I hope.
how to made landing that long
The landing has been done at lintel level of you see the video. The slab has been extended from that beam. We have to design it in such a way that landing level comes at lintel level.
Sir tell me about its total cost and the cost of servicer i mean if i provide my material and you give me your services what would be the charges??
not correct really, we have to have a beam along the stairs on top of the wall. Tread bars should be anchored in to it and it should be monolithic concrete. then only the step will act as cantiliver action
Where I can find these precast stairs in market?
Binod, your can order any precast manufacturers. But i would suggest that you do this at site. It's very simple and you can do it without using shuttering.
Can the contractor apply special price for it?
Yes, we can charge extra, because it requires skill and accuracy.
Sir, can i know the reinforcement details and how much wide it is?
These steps have width equal to brick (9 inches) and the thickness of slab is 3 inches to match the brick. The length is 3 feet.
We have three 10mm bar as reinforcement 3/4 inch from top.
Total length is 3feet or 3.75 sir as 9inches goes into the wall ryt sir?
Exactly. You are absolutely right. 👍
I want 4 feet step can i do this?
You can do this but you need the thickness of slab to be 4 inches and wall have to be 13 inches instead of 9 inches. Secondly we cannot have exposed brick because the thickness of slab and brick won't match.
Sir I want in wooden stir what to do
Wooden staircase can be done but it has to be inside as rain and weathering may soul it outside. However you can use MS frame and can put wooden planks on it. I have used stone in other case. The video will be uploaded this wekend.
@@Understanding1 thanks sir
please refer the note or book for design of this stair case
I don't have book to refer.
What is the thickness of the brick wall?
9"
That last step at the top 😂
The last step on top is casted from the roof slab. I
Is the construction cost more costly than staircase with Raiser...When I connected with builders for this, they said it's more costly and complex too...
Dear Selva, any prefab construction is cheaper than cast in situ if done at site. This construction was little cheaper when i did it. I saved big money on shuttering and the quality was better.
In India any thing that is not traditional is considered costly. A good Contractor and engineer will always starve for challenges.
Hatsoff sir
Floating stair BEAM ke andar se nikalna chahiye. Nahi to ye gir sakta hai
Sir mistry ka no melega
APKI BANAi HUI STAIR KO FUNCTION KRTE HUE KITNA TIME HO CHUKA H
MUJHE BHI BANVANA H Per Technique p Confidence ni ho Raha
How cool
Thank you.
HSE would have a field day 🤣
The security is perfect. They are designed with property engineering detail.
Supa
Thanx Ramesh.
Weldon
Thank you.
In logo ka contact no. Milga
It's very weak..
It's not. It's as string as normal staircase.
वेसे ये सीढिया टिकेगी नहीं बेकार है
Music बहुत बेकार है
I def wouldnt trust this build