Amazing Woodworking Techniques & Wood Joint Tips | Genius Wooden Connections | by
HTML-код
- Опубликовано: 29 ноя 2023
- Do you want to watch the best woodworking you will see? Stay focused, because Marcip is an DIY expert on creating perfect wood joints. In his videos, he shows how his joining styles and techniques are flawless. Get ready for some step-by-step craftsmanship and seamless precision!
MARCIP
Instagram: / marcipgroup
RUclips: / @marcip
Tiktok: / marcipgroup
Facebook: profile.php?...
Email: marcipgroup@gmail.com
Disclaimer: Quantum Tech HD is not affiliated with the businesses whose products are shown in this review. Any trademarks depicted are the property of their respective owners. 
Наука
![Megan Thee Stallion - BOA [Official Video]](http://i.ytimg.com/vi/TKQY2ZlIEjY/mqdefault.jpg)
1:00 Why wouldn't you just drill out the knot so you get a perfect circular hole, then fill it with the same sized dowel so you don't have to do all the extra steps of the super glue, saw dust, etc.?
I do them with offset ovals at half thickness on each side. One failing won't leave a hole in your boat.
bc then the video would be over dummy
The joints are eye pleasing for sure...But not needed.
Sometimes less is not only more,but better as well
Certainly, knowledge is the most powerful weapon. Definitely, I’ve enjoyed your demonstration, and learned a lot. Thanks. Always
Einfach nur Respekt für die Handwerkskunst 💪
Excellent work.
It's really extraordinary, the ability of a qualified carpenter, neat, symmetrical, sturdy and strong, not everyone can do this job, it requires flying hours and precision in measurements and calculations, basically appreciation for those who created this content, always success ♥️♥️❤❤
Creatividad que es digna de elogio, la forma de trabajar de los ESPAÑOLES es de mucha calidad, muy sólida 👍👍👍❤️❤️❤️🙏
Большая часть этих так называемых лайвхаках, оптсана еще книгах для плотников СССР.
По такой книге, мой отец еще дачный дом строил, без единого гвоздя. Уже 35 лет прошло. А все проемы под окна, двери, стыки, все ровное. А современный (баня) уже покосилась и гуляет от температур.
Beautiful, thank you!
Danke! ❤
Un vídeo muy satisfactorio👍🏻😍
Simply superb bro 👌
Sometimes you should mention the dimensions for better understanding..❤
saved the link, thank you :)
I normally get annoyed by videos that do not show what you see on the still photo "Hook" but these are impressive joints and any joint that is strong by design will always be better than one that relies on fixings.
感動しました😊
Bom dia!
Muito show.
Should have repaired it with ramen.....
Always have my little tin of sawdust handy...
Просто похвастался мастерством. Молодец, что так умеешь.
Hello 👋. Useful video 👍
*I'm head over heels for this story! 💖*
Very good video Like it
Оказывается, не только японцы умеют такие соединения досок делать. :)
I'd say, you need CNC to make the joints as precise to have a right angle.
@2:30 Ok, why would you dowel a join like that, rather than at a right angle through the mortice and tenon? Doesn't seem like the dowel would add any extra strength this way; force sufficient to separate the M&T would just pull that dowel out along with it.
That would work too. If you notice the dowel holes were half on the mortise and half on the tenon, effectively making the dowel like a key that prevents the joint pulling apart.
Cool
Aw wah li
Сделай себе киянку, уникум блть!)
Die Schwalbenschwanz Verbindung ohne Dübel, da es nicht notwendig ist und es sieht schöner aus. Bitte einen Holz Hammer verwenden.
I don't get the painter's tape on the hinge. What was that supposed to do? it didn't line up any markings or anything at all. was it meant to be a spacer between the two pieces...? that is all i can figure it did.
👍👍👍👍👍👍👍
😮😮
зачем малярная лента на петлю?
😁👍🏼
避難系的技能
Интересно, что за белый клей? Не ПВА же?
La fueta el marei oi awena
Le la perfeco
😊
А во кто мне, темному объяснит.
На первом примере: если он туда ввинтил шурупы, то зачем туда же бобышки? Что они держат? А если они держат хоть что-то, то зачем там шурупы!?
Это инерция, когда не было такого выбора метизов. Это, как выбросить пульт от телевизора и вставать каждый раз, когда нужно переключить программу😂
03:27 the ant
всё хорошо, но почему саморезы по металлу используют
나쁘지 않다
The author does like to from scratch, ruclips.net/user/postUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO shaping and trimming wood from large blocks into fine finished products. As another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us don’t have the room or budget for. But, knowing how to do these things, even if we won’t be able to practise the full stack project, is still great.
PVCu
Wirklich erstaunlich ist da nichts dran
Все это можно было сделать клеем ПВА.
Не можно, а банально нужно
Это же как дорого должно стоить бревно что бы его чопиками ремонтировать...?
Im a woodworker and, as much as I love the other, more industrial Q Tech videos, the woodworking ones just have a way of really making me want to kill myself holy shit its bad.
Gooden tac
Just out it on rice duh
My friend died from making these notches. Dont do it
ফাইন
should have used ramen
those nails do more damage than the hammer would. That vice work was so "good" that there's a huge gap in the joint.
GARBAGE
パズルみたいやな
How about just getting a piece of wood that doesn't have a huge knot in it? Instead of spending an hour putting a damn dowel in a knot hole for crying out loud?
Can you do it Mr federal geommetery licence international federation?
''Don't Judge!''...learn that!!!
Your comment had me rollin’. Sounds exactly like something I would say. You beat me to it. And it still looked like crap when it was done.
@@_Jan_Jaker_aj_1_ of course I can do it. I literally have a video on my channel about plugging holes in wood. But it's only viable if it's a small nail hole or something of the sort. Not a giant knot! I'll put it this way, if I saw an employee of mine doing this, id fire them.
@@A_Stereotypical_Guyeven though u can do it u r always positive so report my comment to RUclips...
@@JHKCFbruh, who are u referring to?😐👍😎💦😐🔥💦😎😐
Some things could be done better
None of this is really worth it. Seems more like a hobby than anything else. Its neat but not practical
Ну можно было черноту и убрать!
Aiu uiae hwoae ewy wh
Handwerklich schlecht gemacht. Um Feuerholz zu machen ok. Für alles andere lieber nicht
FKN clickbait
Хуета. Больше половины "лайфхаков" описаны давным давно, а автором ролика исполнены на отъебись.
Но инструмент неплохой, да.
Лично мне было бы стыдно, имея годный парк техники и хороший инструмент по дереву, снимать настолько херово исполненные методы
More of the same.
Gobar kha le😊
Don’t be stupid. Don’t do this stuff.