Thanks for the video 👍 Is it possible to have this look only for the Livestream as LowerThird and to have a different look for the Main Output on a Screen?
Thank you for the demonstration. My only question is, how do I configure it to display the lower 3rd under the Pastor during the sermon on the Main broadcast?
This depends on the equipment that you are using. You need to be able to have the necessary outputs to send. Also, depends on your set up as well and how you are streaming.
This video was very helpful. I have everything set up the way you have it in the video. However, is there a way I can display the bible verses one way on my audience display and another way on my live stream?
So yes it is possible to do this. You will need to have 2 different audience looks. A look for the Livestream and a Look for the audience. You will also need to be able to have 2 outputs. To be able to send to the audience screen and another to send to the livestream feed. Without knowing your current set up. Something like a decklink duo would be able to do this for you.
Hello, thanks for your video, really helpful. I followed your steps all the way to the end. I had to select the new theme under look for it to project on our screen. Adding the new theme to look means that song lyrics will use the same theme. What should I do to use the new theme for only bible verses and then another theme for Songs lyrics? Thanks
When you select Bible, it will have it's own section to select the theme you want. If you select the Theme from the top toolbar without going to Bible first, it will apply that theme to all your slides. Just go to Bible first, then Options on the far right, then select theme from there. That should select it only for the Bible verses and scripture.
Great Video! Was wondering if you could inform me on how to display this solely to my livestream look and not to all looks (like my in-house screens.) Regardless, thanks!
You will need to have multiple outputs. For example your main display and stage display are 2 outputs. You would need a third. Best way to do this, which is what we use is a Blackmagic Decklink duo or quad. You’ll be able to send that look to your stream and customize it how you want to within Pro7.
Question: Our church uses wire cast for the lower thirds and pro presenter for the LED screen, would I just have to manually send each one to the wire cast or is there a way to link it to the live so that they can see the scriptures?
So this video was GREAT!! But I'm having an issue where the background opacity is very light. Does anyone know how to fix this so that the text can be better seen??
Thanks for a great video. This is so helpful and will make one. The church pc we us that runs pro presenter on it does not have photo shop. My mac at home does. If I make this nice lower third theme on my mac at home. Do you know of a way to export it from mac, and then import it into the pro presenter church pc? Thanks Bryan
Hey, so sorry for the late response. In the Bible tab to the right where it says Options. Click options and you'll see "Display Translation". Check that and it will display the translation next to the Version/Verse reference box you created. Just make sure the box is wide enough to show or it will be cropped out.
Hey I followed the tutorial and the box for the reference shows up how I want it but the box for the scripture doesn’t seem to change and is remaining the default grey, how can I fix that?
You will need to have a separate output for the displays. Then, you can set a theme or look for each display where one is a L3 and your main display shows full center how you want.
Hello, what about a longer verse, for eg. Esther 8:9? How you can i show it within the box and not going out of it? Sorry for my english... i hope you understand.
You could make the text smaller so it allows more to fit or you can create a larger box height, but that could potentially get in front of your video feed. You can always “copy to selected presentation” and then customize each verse text to your liking where even if a long verse is split into two slides it’s still visually pleasing.
You’ll need to be able to have 2 separate outputs. One for online and one for in house. If it’s the same you won’t be able to do that. If you do, then you’ll be able to edit the looks for each output.
Thanks for the video Chad! I’m having a difficult time outputting my livestream look from PP7 to our Resi Ray encoder. Do I need to have a physical output from my PP7 machine (iMac) to our ATEM Mini? Also, do I need to have the ATEM listed as a video input in PP7?
It depends on what is being sent to the Ray. Is it from the mini or from the output of the computer? If it’s coming from mini, then whatever is on program is what will show. I’m not sure that helps, but hard to know exactly your set up.
Once the slides for Bible verses are done, how do we stop the graphic image from being transmitted? The text goes away but the image remains. Turning off Audience display makes no difference. is there a way to fade it out or turn it off from Propresenter?
You should be able to hit clear all and it all go away. The big X that shows up when you hover over the output preview. Or, if you have all the verses you can copy to selected presentation and then when you clear your slide it will go away.
You can change the size of the text so more lines can fit onto one. But also some verses are short so you’d have to keep that in mind. It’s best to get the scripture ahead of time so you can make any formatting changes so it all looks right.
Hi,. Actually i dont have my language bible in the pro presenter so how would i able to import external bibles source to it our else what is the best way to solve this issue .
Have you tried looking for the Bible’s that propresenter offers to buy and add? If it’s not provided, the only option would be that you’d have to copy and paste each scripture reference you need from a source online when you need it. You can also request ProPresenter to add that language to their options to purchase.
Ok, I will check to see if this work for us. I want to show the pastor name on screen at least twice when he is preaching. What steps to take to do this?
Wierd issue, i create a these that just puts 2 rectangles bottom left with text one for rev name top and bottom one for what book he is on this week like eph 4:1-14 but when i go add a pic of him to it to see what it looks like the boxes are behind the pic i brought in :(
Thank you for this video. So helpful
This was extremely informative, thanks for putting this video together!
This was an awesome video....Our lower thirds were not what we were wanting. But, I now have so many ideas. Thanks
Thanks for the video 👍
Is it possible to have this look only for the Livestream as LowerThird and to have a different look for the Main Output on a Screen?
Not totally sure, but have a feeling that you can. We haven’t tried that!
Hey I'm a pastor here in Chattanooga, TN - Arena of Praise, is there anyone who can stop by and provide a helping hand for a quick setup?
How can I help? I'm not anywhere near you.
Great video. Straight to the point.
Thanks man. God Bless you.
Thanks for sharing! Great resources
Thank you for the demonstration. My only question is, how do I configure it to display the lower 3rd under the Pastor during the sermon on the Main broadcast?
This depends on the equipment that you are using. You need to be able to have the necessary outputs to send. Also, depends on your set up as well and how you are streaming.
One way is to use a Prop. Research ProPresenter props on RUclips. You can also control props via Macros for easy on-the-fly triggers.
This video was very helpful. I have everything set up the way you have it in the video. However, is there a way I can display the bible verses one way on my audience display and another way on my live stream?
So yes it is possible to do this. You will need to have 2 different audience looks. A look for the Livestream and a Look for the audience. You will also need to be able to have 2 outputs. To be able to send to the audience screen and another to send to the livestream feed. Without knowing your current set up. Something like a decklink duo would be able to do this for you.
Hello, thanks for your video, really helpful. I followed your steps all the way to the end. I had to select the new theme under look for it to project on our screen. Adding the new theme to look means that song lyrics will use the same theme. What should I do to use the new theme for only bible verses and then another theme for Songs lyrics? Thanks
When you select Bible, it will have it's own section to select the theme you want. If you select the Theme from the top toolbar without going to Bible first, it will apply that theme to all your slides. Just go to Bible first, then Options on the far right, then select theme from there. That should select it only for the Bible verses and scripture.
Great Video! Was wondering if you could inform me on how to display this solely to my livestream look and not to all looks (like my in-house screens.) Regardless, thanks!
You will need to have multiple outputs. For example your main display and stage display are 2 outputs. You would need a third. Best way to do this, which is what we use is a Blackmagic Decklink duo or quad. You’ll be able to send that look to your stream and customize it how you want to within Pro7.
Question: Our church uses wire cast for the lower thirds and pro presenter for the LED screen, would I just have to manually send each one to the wire cast or is there a way to link it to the live so that they can see the scriptures?
Nice tutorial. Thanks man
Amazing!!! Thanks for this
So this video was GREAT!! But I'm having an issue where the background opacity is very light. Does anyone know how to fix this so that the text can be better seen??
Impressive great video please can you do same for songs or lyrics
You definitely can do it in propresentor 6
Awesome!
Thanks for a great video. This is so helpful and will make one. The church pc we us that runs pro presenter on it does not have photo shop. My mac at home does. If I make this nice lower third theme on my mac at home. Do you know of a way to export it from mac, and then import it into the pro presenter church pc? Thanks Bryan
You can email it to yourself or put it on a thumb drive or use something like DropBox to download from the cloud.
Nice though but how do you add scriptures wit propresenter in real edits with your footage ms
Great tutorial, what about the Bible version. How do you add that? Thanks
Hey, so sorry for the late response. In the Bible tab to the right where it says Options. Click options and you'll see "Display Translation". Check that and it will display the translation next to the Version/Verse reference box you created. Just make sure the box is wide enough to show or it will be cropped out.
❤❤❤
Can you use the same concept for worship lyrics?
You could create a template that has the lower third background for your songs if that is what you mean, yes.
Hey I followed the tutorial and the box for the reference shows up how I want it but the box for the scripture doesn’t seem to change and is remaining the default grey, how can I fix that?
Strong Work, Thank you!
How can I make it so that it is lower third on the live stream and that the chosen verse is shown on the whole main screen in the hall simultaneously?
You will need to have a separate output for the displays. Then, you can set a theme or look for each display where one is a L3 and your main display shows full center how you want.
Hello, what about a longer verse, for eg. Esther 8:9? How you can i show it within the box and not going out of it?
Sorry for my english... i hope you understand.
You could make the text smaller so it allows more to fit or you can create a larger box height, but that could potentially get in front of your video feed. You can always “copy to selected presentation” and then customize each verse text to your liking where even if a long verse is split into two slides it’s still visually pleasing.
How do I make this to were it shows online only? I'd like the boxes to appear online only and not in house
You’ll need to be able to have 2 separate outputs. One for online and one for in house. If it’s the same you won’t be able to do that. If you do, then you’ll be able to edit the looks for each output.
Thanks for the video Chad! I’m having a difficult time outputting my livestream look from PP7 to our Resi Ray encoder. Do I need to have a physical output from my PP7 machine (iMac) to our ATEM Mini? Also, do I need to have the ATEM listed as a video input in PP7?
It depends on what is being sent to the Ray. Is it from the mini or from the output of the computer? If it’s coming from mini, then whatever is on program is what will show. I’m not sure that helps, but hard to know exactly your set up.
@@rttnproduction it helps. Thanks!
Once the slides for Bible verses are done, how do we stop the graphic image from being transmitted? The text goes away but the image remains. Turning off Audience display makes no difference. is there a way to fade it out or turn it off from Propresenter?
You should be able to hit clear all and it all go away. The big X that shows up when you hover over the output preview. Or, if you have all the verses you can copy to selected presentation and then when you clear your slide it will go away.
Just wondering, how do you guys format the lower third slides where some have single text, some have multiple text?
You can change the size of the text so more lines can fit onto one. But also some verses are short so you’d have to keep that in mind. It’s best to get the scripture ahead of time so you can make any formatting changes so it all looks right.
Thank you for responding. What I'm thinking of is creating different looks for each different type of slide. Is
Hi,.
Actually i dont have my language bible in the pro presenter so how would i able to import external bibles source to it our else what is the best way to solve this issue .
Have you tried looking for the Bible’s that propresenter offers to buy and add? If it’s not provided, the only option would be that you’d have to copy and paste each scripture reference you need from a source online when you need it. You can also request ProPresenter to add that language to their options to purchase.
Will this be the same if I was live streaming?
Yes, we use it when we live stream, but you will have to have the outputs available to send it to livestream separately from your main projector feed.
Ok, I will check to see if this work for us. I want to show the pastor name on screen at least twice when he is preaching. What steps to take to do this?
Yes, it work. Thanks@@rttnproduction
Wierd issue, i create a these that just puts 2 rectangles bottom left with text one for rev name top and bottom one for what book he is on this week like eph 4:1-14 but when i go add a pic of him to it to see what it looks like the boxes are behind the pic i brought in :(
Make sure the pic is set as a background in this case. Then click that image, then do the scripture lower thirds. See if that works.
What if you dont have ProPresenter?
Hey, not sure what other program you could use to do this. You could possibly pre make them in photoshop if you know your scripture ahead.